Topic: GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread - page 3. (Read 177410 times)

What does your command line say now?

From that last screen shot. You have got a NEWPAC not a 2pac. Which means your freq command is irrelevant. You need the command for the NEWPAC freq.

If youve compiled it on the pi then you can open a new text document in the cgminer folder. Then wrote your command line in “./cgminer etc etc etc” save it as a “.sh” file then right click and change the permissions to make it executable. Then doible click and select open in terminal.

Have you created a ".sh" file to run it with your specific frequency in the command line?

If you run the standard one it will default to stock freq.

What OS are you running on?

Dont work🤔 keeps starting at 100 mhz

this is an old thread. If you installed CGminer from the build on this thread, you should follow the directions on this one:

https://bitcointalksearch.org/topic/gekkoscience-newpac-terminus-r606-bm1387-official-support-thread-5053833

Should work. I was able to run an OG Compac w/ the new version of cgminer no problems at all.

Hi  

I have a problem  i can't get it higher then 100mhz  cgminer keeps starting on 100mhz en don't get any higher
This is what i do

cd ~/mining/2pac/cgminer./cgminer -o stratum+tcp://sha256.mining-dutch.nl:9996 -u / -p / --suggest-diff 32 --gekko-2pac-freq 200

Can anyone help me out

No idea what you are mining or where that is or why the network difficulty would change that fast.

Looks like some scam coin that's dying fast and you wont get anything worthwhile
Which makes it off topic also.

You will know how long that will take to find a share by reading the 'Connected to' line you didn't post ...

did you add
--suggest-diff 422
so cgminer starts at a reasonable diff? If not the stick will have to work against a much higher difficulty for the 1st share and then hope the pool lowers it for the next shares. That can take a lot of time - possibly longer than it takes for another block to be started.

Couldn’t remember if it was supported at all so hedged my bets 

edit: have the gekko vers.

sometime the miner say that


U]SB management [P]ool management S]ettings D]isplay options [Q]uit                                                  
0: BSD 10014785: BM1384:02  200.00MHz T:169 P:0   (97:195) |  0.0% WU:  0% |  0.000 /  0.000h/s WU:0.0/m               --------------------------------------------------------------------------------                                        
[2021-08-20 21:17:16.835] Started cgminer 4.11.1                                                                        
[2021-08-20 21:17:16.839] Probing for an alive pool                                                                    
[2021-08-20 21:17:17.004] Pool 0 message: Authorised, welcome DLWPMwmTVyBCxs7Hi5uevNrZBiAovPkRiF!                      
[2021-08-20 21:17:17.004] Pool 0 difficulty changed to 2000                                                            
[2021-08-20 21:17:18.922] 0: BSD 0 - 2Pac BM1384 Bitcoin Miner (10014785)                                              
[2021-08-20 21:17:18.926] Network diff set to 2.23G                                                                    
[2021-08-20 21:17:25.972] 0: BSD 0 - asic plateau: (1/3) 193.75MHz                                                      
[2021-08-20 21:17:30.759] Network diff set to 2.14G                                                                    
[2021-08-20 21:17:30.759] Stratum from pool 0 detected new block at height 13508378                                    
[2021-08-20 21:17:31.068] 0: BSD 0 - asic plateau: (2/3) 193.75MHz                                                      
[2021-08-20 21:17:36.135] 0: BSD 0 - asic plateau: (3/3) 193.75MHz                                                      
[2021-08-20 21:17:36.135] 0: BSD 0 - plateau adjust: target frequency 100.00MHz -> 187.50MHz                            
[2021-08-20 21:17:41.214] 0: BSD 0 - plateau adjust: target frequency 187.50MHz -> 181.25MHz                            
[2021-08-20 21:17:46.286] 0: BSD 0 - plateau adjust: target frequency 181.25MHz -> 175.00MHz                            
[2021-08-20 21:17:50.897] Network diff set to 2.04G                                                                    
[2021-08-20 21:17:50.897] Stratum from pool 0 detected new block at height 13508379                                    
[2021-08-20 21:17:51.303] 0: BSD 0 - plateau adjust: target frequency 175.00MHz -> 168.75MHz
.........
......      
[2021-08-20 21:19:58.127] 0: BSD 0 - plateau adjust: target frequency 18.75MHz -> 12.50MHz                              
[2021-08-20 21:20:03.210] 0: BSD 0 - plateau adjust: target frequency 12.50MHz -> 6.25MHz                              
[2021-08-20 21:20:08.285] 0: BSD 0 - plateau adjust: target frequency 6.25MHz -> 0.00MHz  

        
and nothing :-(

Actually I would be surprised if the bare cgminer would work at all because it lacks the drivers (written by VH) needed for the chips.

What version of cgminer are you running? The standard version isnt great with these. Try downloading the gekko version of cgminer at the start of this thread or in the Newpac/R606 thread.

iam think the hub is able to bring the power

Bitcoin Merch® - Powered USB Hub 3.0, 7 Port UPGRADED 65W for USB Miners Newpac, Twopac, Moonlander, Antminer

this hub is build extra for usb miner

If the hub is able to provide the full power, seems like the only thing could be something with the hardware. I have 2Pacs that still work fine, but they're at least 3 years old and the chips they use are probably even older.