GekkoScience is now dabbling with 16nm ASICs for new designs - page 7.

Zeek_W

sr. member

Activity: 336

Merit: 250

Quote from: in2tactics on April 30, 2017, 09:16:11 AM

Quote from: Zeek_W on April 30, 2017, 09:09:17 AM

Really looking forward to the upgrade kit for S1s.... stupidly I still have one sitting around collecting dust. Is there a market for them at all other than as museum pieces hahah?

I have been holding on to all of my S1 and S3 miners just for the purpose of upgrading. I think we are getting close!

Yeah I just fired up my last S1 and even added the wifi connection. Really hoping one day to get it running again with new guts.

in2tactics

hero member

Activity: 578

Merit: 501

Quote from: Zeek_W on April 30, 2017, 09:09:17 AM

Really looking forward to the upgrade kit for S1s.... stupidly I still have one sitting around collecting dust. Is there a market for them at all other than as museum pieces hahah?

I have been holding on to all of my S1 and S3 miners just for the purpose of upgrading. I think we are getting close!

Zeek_W

sr. member

Activity: 336

Merit: 250

Really looking forward to the upgrade kit for S1s.... stupidly I still have one sitting around collecting dust. Is there a market for them at all other than as museum pieces hahah?

aarons6

legendary

Activity: 1736

Merit: 1006

i have some bitcoin set aside for a couple BF sticks.. i am getting excited. i look forward to seeing your prototype.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: sidehack on March 25, 2017, 08:48:21 AM

I did it, never received it, got a refund, bought a 10GH AM Blade with that money, and turned it into 2TH within 8 months.

If the Bitfury stick works as expected, it'll take a stout hub but it'd run 2/3 of an S1 by itself. I like that the 2Pac will push as much hash as an AM Cube.

Am cubes wow pre s1

Fried cat

I had four of them.

Sold them got some s1s.

Some guy hmm maybe it was you helped my under volt them to 180 watts and 140 hash.

I am looking forward to the bf sticks

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

I did it, never received it, got a refund, bought a 10GH AM Blade with that money, and turned it into 2TH within 8 months.

If the Bitfury stick works as expected, it'll take a stout hub but it'd run 2/3 of an S1 by itself. I like that the 2Pac will push as much hash as an AM Cube.

isoneguy

hero member

Activity: 518

Merit: 501

Quote from: Lincoln6Echo on March 25, 2017, 05:55:19 AM

Can't wait for the new generation of mining sticks!

One or two USB Sticks with the power of one Avalon first gen! Grin

Time flies...

aw hell, I remember contemplating buying a 5gh miner for $300 and thinking..."damn this is probably a bad idea"

Never did it...still regret it.

Lincoln6Echo

legendary

Activity: 2461

Merit: 1058

Don't use bitcoin.de if you care about privacy!

Can't wait for the new generation of mining sticks!

One or two USB Sticks with the power of one Avalon first gen! Grin

Time flies...

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: takagari on March 22, 2017, 01:07:01 PM

Seems I'm getting closer

If using Windoze, you *did* dl and install the Zadig USB driver right? CGminer requires it for all USB linked devices.

takagari

legendary

Activity: 1050

Merit: 1000

Seems I'm getting closer

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: takagari on March 22, 2017, 12:57:37 PM

Thanks
Was hoping for a hell of a lot less compiling to get these going, don't do much of that.
Will give it a shot.

Or fire up an old Windows pc and use it as the Host. There is a ready-to-run Win binary for it...

takagari

legendary

Activity: 1050

Merit: 1000

Thanks
Was hoping for a hell of a lot less compiling to get these going, don't do much of that.
Will give it a shot.

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

Assuming you're talking about 2Pacs, https://bitcointalksearch.org/topic/gekkoscience-2paccompac-bm1384-stickminer-official-support-thread-1764803

It was on page 2.

takagari

legendary

Activity: 1050

Merit: 1000

Got my sticks and now I can't find the setup guide I knew I saw. Sorry been away and busy and havn't been keeping up, andone able to point me to the closest guide?
Thanks

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

I haven't done any serious mining in a couple years. The last thing I bought new was a single S7LN; before that it was a single S3. Power's cheap enough here I can make do with older gear but mostly I've been mining for heat. New gear prices have sucked for a long time. Pretty much since the S5/SP20 price wars followed by the S5 openly unapologetic price gouging (when it jumped something like 30% in one day, the reason being "because we know we can get away with it"), that was kinda what killed it for me.

You, me and about a thousand other people are really looking forward to those upgrade boards.

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: philipma1957 on March 21, 2017, 02:43:23 PM

Quote from: xleejohnx on March 21, 2017, 02:11:57 PM

its been awhile since i been in this side of forums
is the replacement s1 etc boards still a thing or did it fall thru?
keep up the good work sidehack!!!

I saw your name here and said WTF is he doing posting here.

From you and I to sidekick:

Are we there yet? Grin

as for replacement boards down the road maybe?

haha yeah im never here anymore
i quit mining btc with the prices of S9 miners and the others i dont wanna invest so much in a little return
but i am wanting to replace some s3 boards!! thats affordable and ROI wouldnt take as long!!!

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

I just received prototype boards for a new pod formfactor and the USB hub today. Gonna try and get something working in the next week or so, but manufacture comes first since I'm way behind on 2Pacs.

VH is working on the first steps for BF16 code. I've got a few things to run by him that should make the advanced controls necessary for a full-scale pod easier to get going. The first step is a stick (already have everything for a proof-of-concept, just need driver code) followed by a half-scale pod (new formfactor) based off stick controls; the next step is a full-scale pod with advanced controls and then the S1/3/5 refit boards, which will basically be three of the full-scale pod integrated on a single board with a single controller.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: xleejohnx on March 21, 2017, 02:11:57 PM

its been awhile since i been in this side of forums
is the replacement s1 etc boards still a thing or did it fall thru?
keep up the good work sidehack!!!

I saw your name here and said WTF is he doing posting here.

From you and I to sidekick:

Are we there yet? Grin

as for replacement boards down the road maybe?

xleejohnx

hero member

Activity: 672

Merit: 500

its been awhile since i been in this side of forums
is the replacement s1 etc boards still a thing or did it fall thru?
keep up the good work sidehack!!!

AJRGale

hero member

Activity: 767

Merit: 500

Quote from: sidehack on March 20, 2017, 09:59:33 PM

...
Speaking of working, looks like VH is gearing up to test the USB comms I'll need for the BF16 Compac. So that's pretty great.

that one step closer Cheesy

Topic: GekkoScience is now dabbling with 16nm ASICs for new designs - page 7. (Read 77011 times)