Genesis Mining Presents: SGMiner-GM - now with Zawawa's GG! [Updated 17/01/2017] - page 23.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Arek on December 26, 2016, 02:51:09 PM

Quote from: Termie on December 19, 2016, 04:24:01 AM

Cool miner, thank you! Can´t notice a mentionable difference to Claymores hashrate, but needs a little less power.
Has anyone else played around with XMR rawintensity (1024), worksize (8 ) and gpu-threads (1) parameters?
In my case it seems that every change results in lower hashrate. So it´s useless to try other values(?)

So far for my XFX rx470 4GB best I got with: rawintensity 512, worksize 4 and gpu-threads 2. With this setting I get 650-670 per card depending on card (some are running better).
I use 1074/1900 clocks with 1500 straps bios. cards use 100W each at the wall with 931mv for core and mem. At the same card settings I get 680-690 per card with Claymores miner at 105W at wall.
Probably with more testing we could get more, but I don't have that much time to go through every combination

When I get something better I'll post my findings.

nice one AREK - rawintensity 512 -w 4 -g 2 works well with RX480s

Anyone with R9-Nano and R9-390, what are the best settings?

ocminer

legendary

Activity: 2688

Merit: 1240

Works fine on https://xmr.suprnova.cc

Config:
http://pastebin.com/CzFaZra6

davecoin

hero member

Activity: 816

Merit: 1000

Hello all. I recently did an xmr test run with sgminer-gm on a 5 rx470 rig, win7, 16.9.2, and everything works fine. When I switch back to wolf (xmr) or claymore (zcash), those miners no longer have control over fan speed. I also cannot use watttool or amd settings to control fan speeds. Has anyone else experienced this? I did a clean driver removal and reinstall but the fan speeds are still locked at the previous setting when I first ran sgminer-gm. Help would be greatly appreciated.

edit: I added auto-fan and temp-target to the conf file instead of a static fan speed and now it seems okay.

update: After switching back to claymore zec miner, there is still no fan control and the speeds are strange. The speeds are stuck at 40,40,65,65,50. Seems really odd.

-Dave

jelin1984

legendary

Activity: 2408

Merit: 1004

what i must write for mining monero???

yoyo1

newbie

Activity: 47

Merit: 0

Quote from: el_rlee on December 28, 2016, 01:30:35 PM

Quote from: yoyo1 on December 28, 2016, 01:17:42 PM

I have to clarify that eth configuration with previously used params provides 100% hardware errors rate together with the displaying very high hashrate.
Can somebody list working with sgminer-gm implementation pools?
sgminer-gm 5.4.4
pool eth xmr zcash
dwarfpool.com Sad

null
moneropool.com null Sad

null

- doesn't work

- works
null - coin doesn't exist at the pool

moneropool.com definitely works. here for 5x r9 380x - if somebody knows how to get a better hashrate, let me know Cool

When I try to use mine rx 480 well it shows me that sgminer unable to connect the pool.

frostminer

hero member

Activity: 742

Merit: 505

Hi

Im haunted with some errors on one of my rigs.

It runs fine on pure r9 380 rigs.
But on the mix 380/390 rig im getting:

Building binary cryptonightHawaiigw8l4.bin
Error -11: Building Program (clBuildProgram)
C:\Users\user\AppData\Local\Temp\\OCL2732T5.cl:4:10: fatal error: 'wolf-aes.cl' file not found
#include "wolf-aes.cl"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR
Failed to init GPU thread 0, disabling device 0

So if i add these files to the directory in that path: blake256.cl cryptonight.cl groestl256.cl wolf-aes.cl wolf-skein.cl and jh.cl (the ones it asks for)
i get

Initialising kernel cryptonight.cl with nfactor 10, n 1024
Error -46: Creating Kernel from program. (clCreateKernel)
Failed to init GPU thread 0, disabling device 0

Any ideas?

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

I just wanted to know that sgminer-gm is now supported in simplemining.net Operating System.

el_rlee

legendary

Activity: 1600

Merit: 1014

Quote from: yoyo1 on December 28, 2016, 01:17:42 PM

I have to clarify that eth configuration with previously used params provides 100% hardware errors rate together with the displaying very high hashrate.
Can somebody list working with sgminer-gm implementation pools?
sgminer-gm 5.4.4
pool eth xmr zcash
dwarfpool.com Sad

null
moneropool.com null Sad

null

- doesn't work

- works
null - coin doesn't exist at the pool

moneropool.com definitely works. here for 5x r9 380x - if somebody knows how to get a better hashrate, let me know Cool

Code:

sgminer 5.5.4-gm - Started: [2016-12-28 09:36:52] - [0 days 09:51:47]
--------------------------------------------------------------------------------
(5s):2.482K (avg):2.746Kh/s | A:95472726  R:250013  HW:0  WU:1.117/m
ST: 2  SS: 48  NB: 347  LW: 70544  GF: 90  RF: 0
Connected to MoneroPool (stratum) diff  as user *
Block: f2a41a2e...  Diff:0.00432  Started: [19:27:42]  Best share: 9.23G
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU  0:  70.0C 1375RPM |  551.6/ 548.8h/s | R:  0.0% HW:0 WU:0.230/m rI:509
GPU  1:  66.0C 1211RPM |  551.9/ 549.4h/s | R:  1.4% HW:0 WU:0.223/m rI:509
GPU  2:  66.0C 1211RPM |  557.2/ 550.2h/s | R:  0.0% HW:0 WU:0.208/m rI:509
GPU  3:  64.0C 1031RPM |  556.7/ 548.9h/s | R:  0.0% HW:0 WU:0.220/m rI:509
GPU  4:  65.0C 1161RPM |  556.9/ 549.2h/s | R:  0.0% HW:0 WU:0.237/m rI:509
--------------------------------------------------------------------------------
[19:20:39] Accepted 014de3b1 Diff 50.2K/25K GPU 2
[19:21:51] Accepted 4531e4c5 Diff 242K/132K GPU 0
[19:22:41] Accepted 52abb7e1 Diff 203K/132K GPU 0
[19:23:52] MoneroPool stale share detected, discarding
[19:23:59] Accepted 22819f4d Diff 486K/216K GPU 2
[19:24:01] Accepted 0fae4f56 Diff 1.07M/216K GPU 2
[19:25:24] Accepted 11167bbb Diff 982K/250K GPU 0
[19:26:00] Accepted 39c6f34e Diff 290K/250K GPU 3
[19:26:45] Accepted 40815a96 Diff 260K/250K GPU 1

yoyo1

newbie

Activity: 47

Merit: 0

I have to clarify that eth configuration with previously used params provides 100% hardware errors rate together with the displaying very high hashrate.
Can somebody list working with sgminer-gm implementation pools?
sgminer-gm 5.4.4
pool eth xmr zcash
dwarfpool.com Sad

null
moneropool.com null Sad

null

- doesn't work

- works
null - coin doesn't exist at the pool

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: cryptomaxsun on December 28, 2016, 11:30:46 AM

how in bat.file set intensity?
and card numbers to set?

there is magic when you run the miner with the -h parameter Wink

cryptomaxsun

legendary

Activity: 2744

Merit: 1387

Ukrainians will resist

how in bat.file set intensity?
and card numbers to set?

Bastime

sr. member

Activity: 519

Merit: 250

Quote from: yoyo1 on December 28, 2016, 04:06:56 AM

For me it looks like there are the following issues:
eth
high hardware errors rate

xmr
something went wrong with stratum

zcash
poor performance

Genesis mining's own zcash miner is much faster.

yoyo1

newbie

Activity: 47

Merit: 0

For me it looks like there are the following issues:
eth
high hardware errors rate

xmr
something went wrong with stratum

zcash
poor performance

Used couple of RX 480 (HIS) with 8 Gb of vram.
Ubuntu 16.04 kernel 4.8.1 amdgpupro 16.50

Nightworker88

newbie

Activity: 64

Merit: 0

Hallo,

thought the last weeks i am getting mad.

not possible to start sgminer: only start -two lines- close-finish

my test rigs : all amd, copies of fresh install win 10 64bit, completly updated

(but not the amd drivers, cause i have r9 270x-r9 290x, with other miners run quite well, but i want switch, so sgminer)

just tried sgminer on an older rig, just tried ----worked!!! ---- win 10 64 bit -BUT NOT UPDATED about half year

so i tried on different rigs -always the same, on the last win version NO START!! - on older ones work!!!???

Any ideas? -- cant delete last year updates from rigs!!!

reflexmk

sr. member

Activity: 289

Merit: 250

Can someone post a working command line for mining XMR on win10 64bit? Thanks.

Arek

newbie

Activity: 44

Merit: 0

Quote from: Termie on December 19, 2016, 04:24:01 AM

Cool miner, thank you! Can´t notice a mentionable difference to Claymores hashrate, but needs a little less power.
Has anyone else played around with XMR rawintensity (1024), worksize (8 ) and gpu-threads (1) parameters?
In my case it seems that every change results in lower hashrate. So it´s useless to try other values(?)

So far for my XFX rx470 4GB best I got with: rawintensity 512, worksize 4 and gpu-threads 2. With this setting I get 650-670 per card depending on card (some are running better).
I use 1074/1900 clocks with 1500 straps bios. cards use 100W each at the wall with 931mv for core and mem. At the same card settings I get 680-690 per card with Claymores miner at 105W at wall.
Probably with more testing we could get more, but I don't have that much time to go through every combination

When I get something better I'll post my findings.

el_rlee

legendary

Activity: 1600

Merit: 1014

Code:

[10:15:18] Started sgminer 5.5.4-gm
[10:15:18] * using Jansson 2.7

This is all I'm getting... anybody knows help? Thanks!

el_rlee

legendary

Activity: 1600

Merit: 1014

Which drivers should be used (especially for xmr)? Thanks

bouc

jr. member

Activity: 44

Merit: 1

any hints for configuration working with dwarf / expanse? It seems that the stratum protocol dwarfpool uses is not supported...

Termie

sr. member

Activity: 642

Merit: 292

Cool miner, thank you! Can´t notice a mentionable difference to Claymores hashrate, but needs a little less power.
Has anyone else played around with XMR rawintensity (1024), worksize (8 ) and gpu-threads (1) parameters?
In my case it seems that every change results in lower hashrate. So it´s useless to try other values(?)

Topic: Genesis Mining Presents: SGMiner-GM - now with Zawawa's GG! [Updated 17/01/2017] - page 23. (Read 140431 times)