Topic: Genoil's ZEC miner: AMD ZCash miner for Windows - 0.6 - page 10. (Read 56832 times)
how to mine with cpu?
how to instal genoil at EThOS and how to run it?
Step 1: Format drive
Step 2: Install windows
Step 3: Run Genoil
Step 4: ...
Step 5: Profit!
getting this on 1 of my rig:
zconn not accepted: low difficulty share of 0.062499046325683594 (23)
zconn not accepted: low difficulty share of 0.062499046325683594 (23)
If you get this sometimes, it's fine, maybe once every few hours or so.
The share was too low difficulty and the pool rejected it.
getting this on 1 of my rig:
zconn not accepted: low difficulty share of 0.062499046325683594 (23)
zconn not accepted: low difficulty share of 0.062499046325683594 (23)
how to instal genoil at EThOS and how to run it?
we need less CPU usage leak people, its GPU miner but takes loads of CPU
Please in next ver make command for log off/on.
please support XnSub.
Per the included readme file in 0.6:
--fail/-f 0: attempt gpu restart 1: exit gpu thread 2: exit application (default: 0)
--zero/-z 0: disable 0 sol/s watchdog 1: enable 0 sols/s watcdog (default: 1)
I would suggest putting using -f 2 as it exits the application all together, then you can just use a loop to restart it in a batch file.
Leaving watchdog on has helped with the tapering off I was experiencing on a couple of cards.
--fail/-f 0: attempt gpu restart 1: exit gpu thread 2: exit application (default: 0)
--zero/-z 0: disable 0 sol/s watchdog 1: enable 0 sols/s watcdog (default: 1)
I would suggest putting using -f 2 as it exits the application all together, then you can just use a loop to restart it in a batch file.
Leaving watchdog on has helped with the tapering off I was experiencing on a couple of cards.
works fine on most of my rigs but on 1 particular rig on 1in 10, it just keeps on saying genoil.exe has failed or stopped with the popup dialog, gpu mines fine, even on older version, have no idea whats wrong with that rig.
looking fwd to more improvements.
on some other rigs just random crash, stopped work, just restart and it'll be ok for couple of hours. i'd say chk on rigs every 4-6 hours ? but this is really painful to do.
thx OP for sharing
looking fwd to more improvements.
on some other rigs just random crash, stopped work, just restart and it'll be ok for couple of hours. i'd say chk on rigs every 4-6 hours ? but this is really painful to do.
thx OP for sharing
Not sure why but after many many attempts running it.. it suddenly seemed to have stabilized. But I will leave it on the 10 minute timer restart. but for test now it's been running about 20-25 minutes no crash.
how to use this -f -z properly on 4 GPU rig? it doesnt seem to work
This is a nice piece of software but still very unstable 
One of my rigs keeps crashing after a while, sometimes one hour, sometimes 15 minutes.
None of the -f options works as it should.
Waiting for version 0.7 with improved stability. And speed!
One of my rigs keeps crashing after a while, sometimes one hour, sometimes 15 minutes.
None of the -f options works as it should.
Waiting for version 0.7 with improved stability. And speed!
Wow I am really impressed with this new 0.6 miner.
I have 3 batch files now. 1 batch files launches two others.
Start.bat
start1.bat (runs my RX 480)
start2.bat (runs my R9 280x and 380x)
This boosted my has rate up quite a bit but one problem with this miner is my 280x card will stop mining and the -f 0 is not restarting it.
I have 3 batch files now. 1 batch files launches two others.
Start.bat
Code:
start cmd /k call start1.bat
start cmd /k call start2.bat
start1.bat (runs my RX 480)
Code:
@echo on
taskkill /f /im genoil.exe
timeout /t 1
genoil.exe -c zec.suprnova.cc:2142 -u name.miner1 -p password1 -P 0 -f 0 -g 1 -k zec zec zec zec
start2.bat (runs my R9 280x and 380x)
Code:
@echo off
set GPU_FORCE_64BIT_PTR 0
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
@echo on
taskkill /f /im genoil.exe
timeout /t 1
genoil.exe -c zec.suprnova.cc:2142 -u name.miner2 -p password2 -P 0 -f 0 -g 0 2
This boosted my has rate up quite a bit but one problem with this miner is my 280x card will stop mining and the -f 0 is not restarting it.
im using https://www2.coinmine.pl/zec/ pool i have similar config and already done this. i just ask about speed and profit
OK so if I understand correctly after some time my balnace Unconfirmed will change in confirmed? yes?
So why on http://zcash.flypool.org/ there was just confirmed balance?
if i look on unconfirmed this pool is faster but how about payment?
So why on http://zcash.flypool.org/ there was just confirmed balance?
if i look on unconfirmed this pool is faster but how about payment?
1- Go here https://zec.suprnova.cc/index.php?page=account&action=edit
2- Add ur withdraw address in "Payment Address" and use ur 4 digit pin to "update ur account"
3- Scroll down and where it says "cashout" u can withdraw ur confirmed coins.
OK so if I understand correctly after some time my balnace Unconfirmed will change in confirmed? yes?
So why on http://zcash.flypool.org/ there was just confirmed balance?
if i look on unconfirmed this pool is faster but how about payment?
So why on http://zcash.flypool.org/ there was just confirmed balance?
if i look on unconfirmed this pool is faster but how about payment?
Look at your left side there is menu with links it has some place blocks times who found what block and under account all your translation going on right now.
.
anyone that cares i got my 3 470 back up and running for a hour or two
20:19:14 pool : submitted and accepted
20:19:17 main : zec-sa#0: 33.7S/s zec-sa#1: 30.1S/s zec-sa#2: 30.5S/s total: 94.3S/s
20:19:22 main : zec-sa#0: 32.7S/s zec-sa#1: 24.9S/s zec-sa#2: 29.5S/s total: 87.1S/s
20:19:27 main : zec-sa#0: 30.2S/s zec-sa#1: 35.0S/s zec-sa#2: 31.4S/s total: 96.7S/s
20:19:32 main : zec-sa#0: 25.5S/s zec-sa#1: 27.1S/s zec-sa#2: 30.7S/s total: 83.3S/s
I'll know for sure at 8am est usa time if it was a pool or some thing else ,
thanks cya
. anyone that cares i got my 3 470 back up and running for a hour or two
20:19:14 pool : submitted and accepted
20:19:17 main : zec-sa#0: 33.7S/s zec-sa#1: 30.1S/s zec-sa#2: 30.5S/s total: 94.3S/s
20:19:22 main : zec-sa#0: 32.7S/s zec-sa#1: 24.9S/s zec-sa#2: 29.5S/s total: 87.1S/s
20:19:27 main : zec-sa#0: 30.2S/s zec-sa#1: 35.0S/s zec-sa#2: 31.4S/s total: 96.7S/s
20:19:32 main : zec-sa#0: 25.5S/s zec-sa#1: 27.1S/s zec-sa#2: 30.7S/s total: 83.3S/s
I'll know for sure at 8am est usa time if it was a pool or some thing else ,
thanks cya
My Balance:
Confirmed: 0.0001 ZEC
Unconfirmed: 0.0069 ZEC
Round earnings est: 0.0002 ZEC
what does it mean? how it works?
Confirmed: 0.0001 ZEC
Unconfirmed: 0.0069 ZEC
Round earnings est: 0.0002 ZEC
what does it mean? how it works?
Round earnings est (roughly) = Confirmed + Unconfirmed
What's unconfirmed now will be confirmed with next several blocks and it will be added to Confirmed.
Jump to: