Be aware! gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall - miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 16. (Read 307024 times)
I noticed that GMiner is consuming system RAM over time, till forcing the reboot of the rig.
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?
Nobody could help me?
Unfortunately I'm forced to use another miner, since I got this problem just with GMiner...
GMiner v2.67 available for download
v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal
Ethash fee is 0.65%
KAWPOW fee is 1%
How much can we expect without rejects / lock shares with a 3080 lhr ?
Should the power draw be highly volatile... jumping up and down every couple of seconds?
GMiner v2.67 available for download
v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal
Ethash fee is 0.65%
KAWPOW fee is 1%
GMiner v2.67 available for download
v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal
Ethash fee is 0.65%
KAWPOW fee is 1%
v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal
Ethash fee is 0.65%
KAWPOW fee is 1%
I noticed that GMiner is consuming system RAM over time, till forcing the reboot of the rig.
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?
Will GMiner include the Autolykos2 algo for ERGO mining in next versions?
no
Will GMiner include the Autolykos2 algo for ERGO mining in next versions?
Hello Everyone, help me set up a batch file with parameters mt
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4
'--mt' - space-separated list of memory tweak numbers for each device (range from 0 to 6, 0 - disable tweaks), only Nvidia GPUs with GDDR5X and GDDR5 memory are supported, requires running miner with admin privileges (for example: '1 3 5')
Hello Everyone, help me set up a batch file with parameters mt
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4
switching over from Phoenixminer,
would appreciate some quick help on RTX 3000 series (no LHR)
what parameters are recommended for these cards?
3060ti
3070
3090
I use cclock and clock and power limit
is there a use for lock clock , lock voltage and ccdvc on RTX 3000 series?
would locking clock better than limiting ?
would appreciate some quick help on RTX 3000 series (no LHR)
what parameters are recommended for these cards?
3060ti
3070
3090
I use cclock and clock and power limit
is there a use for lock clock , lock voltage and ccdvc on RTX 3000 series?
would locking clock better than limiting ?
on hiveOs
3060Ti 1410 / 2200 or 2400 / 150
3070 1070 / 2200 or 2400 / 150
3080 1060 / 2200 or 2400 / 230 ( on my rig suprim X 3080)
Fan 65%
switching over from Phoenixminer,
would appreciate some quick help on RTX 3000 series (no LHR)
what parameters are recommended for these cards?
3060ti
3070
3090
I use cclock and clock and power limit
is there a use for lock clock , lock voltage and ccdvc on RTX 3000 series?
would locking clock better than limiting ?
would appreciate some quick help on RTX 3000 series (no LHR)
what parameters are recommended for these cards?
3060ti
3070
3090
I use cclock and clock and power limit
is there a use for lock clock , lock voltage and ccdvc on RTX 3000 series?
would locking clock better than limiting ?
Any chance to set up Gminer with the variable hashrate from 2.64? I use the pc while mining and it's better this way because I know when something (chrome tab, app window) is consuming excessive GPU resources that lowers Gminer performance so I can close them.
You need to increase the PL
Hi to all. Sorry, if this quiestion was already asked and answered...
How to configure Gminer for ETH+ZIL mining, but with different pools for each coin?
How to configure Gminer for ETH+ZIL mining, but with different pools for each coin?
Look in the folder with the miner there is already configured binary on the example of Shardpool EZIL and 2Miners
Hi to all. Sorry, if this quiestion was already asked and answered...
How to configure Gminer for ETH+ZIL mining, but with different pools for each coin?
How to configure Gminer for ETH+ZIL mining, but with different pools for each coin?
Any chance to set up Gminer with the variable hashrate from 2.64? I use the pc while mining and it's better this way because I know when something (chrome tab, app window) is consuming excessive GPU resources that lowers Gminer performance so I can close them.
Performance for Raven coin (KAWPOW) is much lower than with Team Red Miner. GMiner gives me only 9.60 MH / s and Team Red Miner even 14.25 Mh / s on the RX480 4 GB graphics card ( to the left is GMiner and to the right is Team Red Miner ) :
GMiner v2.66 available for download
v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools
v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools
Any plans for ERG+Zil support? Do you plan to support verthash?
GMiner v2.66 available for download
v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools
v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools
nice update and when update for ERGO support ?
GMiner v2.66 available for download
v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools
v2.66
+ improved KAWPOW (Ravencoin) performance under Linux on Nvidia GPUs
+ added AMD implementation for KAWPOW (Ravencoin)
+ improved compatibility with Ethash pools
Jump to: