My FrankenFury
Got my hands on one of H board no M board so way not create your own FrankenFury
Got my hands on one of H board no M board so way not create your own FrankenFury
Don't you need a level shifter on the comm lines?
Topic: [GUIDE] BitFury Miner Support/Tuning - page 19. (Read 148077 times)
Don't you need a level shifter on the comm lines?
My FrankenFury
Got my hands on one of H board no M board so way not create your own FrankenFury
http://imageshack.us/a/img824/1081/750f.jpg
Got my hands on one of H board no M board so way not create your own FrankenFury
http://imageshack.us/a/img824/1081/750f.jpg
If anyone want to take a tracking of his Bitfury based on performance data of each card, here you find a macro for Excel which track all JSON-data each 5min. It delivers you some results as table and chart. You can analyze as you want, e.g. by card, bus, slot, SPIerr or MISOerr.
Just open in excel, enter IPadress and click start.
Ciao
Enrico
Just open in excel, enter IPadress and click start.
Ciao
Enrico
A better test would be to power the card and measure voltage at the top of the Pulse inductor. If you get ~0.75v there (or whatever it's adjusted to), the power circuit (including that capacitor) is probably fine. I only say "probably" because I just fixed a board that was missing a cap on the back side. Before replacing that tiny back-side cap, the voltage at the Pulse top was correct, but the card wouldn't hash stably.
okay, i measured, it was 0.3V or 0V, what i can do next?
problem card,A1, not detected
31 aIfDSo 55 1.241 2.199 50 23 0 0 120 [8:E] 708 3 4 2 1 2 2 4 5 4 $
32 aIfDSo 55 1.639 2.236 66 37 0 0 122 [8:F] 693 2 3 4 7 2 4 6 4 3 $
33 aIfDSo 55 0.670 0.495 27 0 0 0 27 [C:0] 730 2 2 2 2 1 1 1 1 1 $
34 aIfDSo 55 1.763 2.401 71 28 0 0 131 [C:1] 687 2 2 5 5 3 3 4 6 4 $
35 aIfDSo 55 0.000 0.037 0 0 0 0 2 [C:2] 756 0 0 0 0 0 0 0 0 0 $
36 aIfDSo 55 0.000 0.000 0 0 0 0 0 [C:3] 756 0 0 0 0 0 0 0 0 0 $
37 aIfDSo 55 0.000 0.000 0 0 0 0 0 [C:4] 756 0 0 0 0 0 0 0 0 0 $
38 aIfDSo 55 0.794 1.741 32 23 0 0 95 [C:5] 724 2 2 1 3 2 1 1 2 3 $
39 aIfDSo 55 1.440 2.566 58 36 0 0 140 [C:6] 699 4 3 3 3 4 6 6 5 2 $
40 aIfDSo 55 1.514 2.419 61 38 0 0 132 [C:7] 697 3 5 5 4 3 4 5 1 5 $
41 aIfDSo 55 0.869 2.511 35 48 0 0 137 [C:8] 721 1 0 2 2 1 3 1 3 4 $
42 aifdso 55 0.000 0.000 0 0 0 0 0 [C:9] 756 0 0 0 0 0 0 0 0 0 $
43 aIfDSo 55 1.663 2.383 67 40 0 0 130 [C:A] 693 5 6 3 3 5 2 5 6 4 $
44 aIfDSo 55 1.738 2.456 70 34 0 0 134 [C:B] 689 5 3 4 3 3 4 5 3 7 $
45 aIfDSo 55 1.266 2.438 51 28 0 0 133 [C:C] 706 3 3 5 3 4 3 2 2 3 $
46 aIfDSo 55 1.763 2.364 71 16 0 0 129 [C:D] 687 5 4 4 4 5 5 5 4 3 $
47 aIfDSo 55 1.936 2.511 78 27 0 0 137 [C:E] 680 5 5 5 5 4 7 5 5 5 $
48 aIfDSo 55 1.589 2.364 64 20 0 0 129 [C:F] 693 4 5 4 5 5 4 4 4 2 $
49 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:0] 756 0 0 0 0 0 0 0 0 0 $
50 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:1] 756 0 0 0 0 0 0 0 0 0 $
51 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:2] 756 0 0 0 0 0 0 0 0 0 $
52 aifdso 55 0.000 0.000 0 0 0 0 0 [D:3] 756 0 0 0 0 0 0 0 0 0 $
53 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:4] 756 0 0 0 0 0 0 0 0 0 $
54 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:5] 756 0 0 0 0 0 0 0 0 0 $
55 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:6] 756 0 0 0 0 0 0 0 0 0 $
56 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:7] 756 0 0 0 0 0 0 0 0 0 $
57 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:8] 756 0 0 0 0 0 0 0 0 0 $
58 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:9] 756 0 0 0 0 0 0 0 0 0 $
59 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:A] 756 0 0 0 0 0 0 0 0 0 $
60 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:B] 756 0 0 0 0 0 0 0 0 0 $
61 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:C] 756 0 0 0 0 0 0 0 0 0 $
62 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:D] 756 0 0 0 0 0 0 0 0 0 $
63 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:E] 756 0 0 0 0 0 0 0 0 0 $
64 aIfDSo 55 0.000 0.000 0 0 0 0 0 [D:F] 756 0 0 0 0 0 0 0 0 0 $
65 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:0] 756 0 0 0 0 0 0 0 0 0 $
66 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:1] 756 0 0 0 0 0 0 0 0 0 $
67 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:2] 756 0 0 0 0 0 0 0 0 0 $
68 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:3] 756 0 0 0 0 0 0 0 0 0 $
69 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:4] 756 0 0 0 0 0 0 0 0 0 $
70 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:5] 756 0 0 0 0 0 0 0 0 0 $
71 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:6] 756 0 0 0 0 0 0 0 0 0 $
72 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:7] 756 0 0 0 0 0 0 0 0 0 $
73 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:8] 756 0 0 0 0 0 0 0 0 0 $
74 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:9] 756 0 0 0 0 0 0 0 0 0 $
75 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:A] 756 0 0 0 0 0 0 0 0 0 $
76 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:B] 756 0 0 0 0 0 0 0 0 0 $
77 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:C] 756 0 0 0 0 0 0 0 0 0 $
78 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:D] 756 0 0 0 0 0 0 0 0 0 $
79 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:E] 756 0 0 0 0 0 0 0 0 0 $
80 AIfDSo 54 0.000 0.000 0 0 0 0 0 [E:F] 756 0 0 0 0 0 0 0 0 0 $
81 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:0] 756 0 0 0 0 0 0 0 0 0 $
82 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:1] 756 0 0 0 0 0 0 0 0 0 $
83 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:2] 756 0 0 0 0 0 0 0 0 0 $
84 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:3] 756 0 0 0 0 0 0 0 0 0 $
85 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:4] 756 0 0 0 0 0 0 0 0 0 $
86 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:5] 756 0 0 0 0 0 0 0 0 0 $
87 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:6] 756 0 0 0 0 0 0 0 0 0 $
88 AIfDSo 54 0.000 0.000 0 0 0 0 0 [F:7] 756 0 0 0 0 0 0 0 0 0 $
speed:5092 noncerate[GH/s]:53.973 (0.574/chip) hashrate[GH/s]:85.449 good:2174 errors:1078 spi-errors:1 miso-error$
4: 832 19.787 29.564 797 361 1 4
8: 880 17.180 29.198 692 379 0 0
C: 880 17.006 26.687 685 338 0 0
D: 880 0.000 0.000 0 0 0 0
E: 864 0.000 0.000 0 0 0 0
F: 756 0.000 0.000 0 0 0 0
finally, im surprised you could get 0.95v even with liquid cooling - pretty impressive. scale back to 0.90-0.92v as its a safer level and watch your autotune.
The bitfury chip is really impressive.During my tests it was
Unfortunately each chip is a bit different and requires a bit different voltage for it's optimal speed.
Another question:
What means if one chip shows aifdso 240?
Like the first one
And it seems that autotune is not working, on the screenshot I manually worked with 2,5,12 chips. The first one is setted up to AIfDSo 55 but automatically falls down to aifdso 240. The second chip was turned off by me because of very low hashrate (200Mhs).
Can you tell something about the first chip? And maybe you know what should I do for 2,5,12 chips to increase their hashrate?
Thank you!
ps: overclocking to 0.95v and oil cooling change nothing...
What means if one chip shows aifdso 240?
Like the first one
And it seems that autotune is not working, on the screenshot I manually worked with 2,5,12 chips. The first one is setted up to AIfDSo 55 but automatically falls down to aifdso 240. The second chip was turned off by me because of very low hashrate (200Mhs).
Can you tell something about the first chip? And maybe you know what should I do for 2,5,12 chips to increase their hashrate?
Thank you!
ps: overclocking to 0.95v and oil cooling change nothing...
change the first to either autotune 'A' and/or change the value to 53. it shouldnt be 240 and is probably caused by a mis-match the last time the file was modified (mine showed 545 once but worked once returned to a usable number). check your spacing
turn chip 2 on. use autotune or start at 53.
tune chips 5 and 12 to either 53 or autotune. 50 is too low and may be your issue.
finally, im surprised you could get 0.95v even with liquid cooling - pretty impressive. scale back to 0.90-0.92v as its a safer level and watch your autotune. ideally your chips should be 53-55 (most of mine run 54 when my system is stable near its cooling capacity)
A better test would be to power the card and measure voltage at the top of the Pulse inductor. If you get ~0.75v there (or whatever it's adjusted to), the power circuit (including that capacitor) is probably fine. I only say "probably" because I just fixed a board that was missing a cap on the back side. Before replacing that tiny back-side cap, the voltage at the Pulse top was correct, but the card wouldn't hash stably.
yeah, i know it... But i measured other card and third, capacitor was like 0.7M ohm...?
I have problem, one my h-card doesn't work.
Its not hot, no hashing, 20W, it worked 12h ago very well (28Gh/s), it seems m-board not even get information from h-board.
I tried change new ssd card also.
What is wronng, how i can fix that problem?
Uploaded with ImageShack.us
heatsinks should be on the other side of the board. Those components you circled should be 0ohm so that's not the problem. Its not hot, no hashing, 20W, it worked 12h ago very well (28Gh/s), it seems m-board not even get information from h-board.
I tried change new ssd card also.
What is wronng, how i can fix that problem?
Uploaded with ImageShack.us
I have problem, one my h-card doesn't work.
Its not hot, no hashing, 20W, it worked 12h ago very well (28Gh/s), it seems m-board not even get information from h-board.
I tried change new ssd card also.
What is wronng, how i can fix that problem?
Can you post log from miner page ? Its not hot, no hashing, 20W, it worked 12h ago very well (28Gh/s), it seems m-board not even get information from h-board.
I tried change new ssd card also.
What is wronng, how i can fix that problem?
I have problem, one my h-card doesn't work.
Its not hot, no hashing, 20W, it worked 12h ago very well (28Gh/s), it seems m-board not even get information from h-board.
I tried change new ssd card also.
What is wronng, how i can fix that problem?
http://img62.imageshack.us/img62/4086/v80m.jpg
Uploaded with ImageShack.us
Its not hot, no hashing, 20W, it worked 12h ago very well (28Gh/s), it seems m-board not even get information from h-board.
I tried change new ssd card also.
What is wronng, how i can fix that problem?
http://img62.imageshack.us/img62/4086/v80m.jpg
Uploaded with ImageShack.us
But why the other chips with capital "A" is not changed their frequency from 55? Day after day frequency is not changing...
Are you still using the old version of chainminer that shipped with the v1 M-boards? It either doesn't change the clocks, or it doesn't display it right. I upgraded to the latest version on github, and now autotune actually works (except for half-dead chips). But make sure to edit the version number before compiling if you have a v1 M-board!
Update for v1 M board owners. If you want to use the latest build of chainminer with your version 1 M-board please do the following
a) Download chainminer master on your raspberry PI from github and unzip it
https://github.com/bfsb/chainminer/archive/master.zip
b) change line 6 in miner.h
c) make
d) move /opt/bitfury/chainminer
e) copy chainminer-master directory to /opt/bitfury/chainminer
f) mine with latest chainminer goodness
a) Download chainminer master on your raspberry PI from github and unzip it
Code:
https://github.com/bfsb/chainminer/archive/master.zip
b) change line 6 in miner.h
Code:
1 #ifndef MINER_H
2 #define MINER_H
3 #include "handylib.h"
4
5 #define NDEBUG
6 #define VERSION 1
c) make
Code:
cd chainminer-master
make
cd ..
d) move /opt/bitfury/chainminer
Code:
mv /opt/bitfury/chainminer /opt/bitfury/chainminer_v1_original
e) copy chainminer-master directory to /opt/bitfury/chainminer
Code:
cp -r chainminer-master /opt/bitfury/chainminer
f) mine with latest chainminer goodness
The column after the [4:x] shows how many of the 756 cores have not produced good results. It looks like chips 5 and 12 are half (or more) dead, so you'll need to leave autotune off and just accept that the noncerate on those will be less than half their hashrate. You can try different speeds to see what produces the best noncerate. You'll probably want to clock them as high as the rest, and just expect 50%+ error rate. Chainminer autotune can't handle chips with alot of dead cores and assumes they need to be downclocked or shut off. After running for long enough to get most of the bad-core counts near 0, look at /tmp/.core.log and see what 5 and 12 look like. It'll probably show that one side or the other is dead. Here's one of my half-dead chips:
Code:
pi@bitfury ~ $ grep ^41 /tmp/.core.log
41 35 36 30 22 31 31 35 35 33 39 21 31 34 0 0 0 0 0 0 0 0
41 31 35 36 38 29 18 42 27 28 26 25 31 25 0 0 0 0 0 0 0 0
41 34 34 36 34 25 28 27 29 26 31 28 26 33 0 0 0 0 0 0 0 0
41 32 31 29 40 33 29 28 26 35 40 31 35 42 0 0 0 0 0 0 0 0
41 19 23 27 29 40 31 40 18 32 22 35 30 38 0 0 0 0 0 0 0 0
41 31 18 26 34 21 25 31 38 39 24 25 34 39 0 0 0 0 0 0 0 0
41 30 24 35 34 32 19 33 26 36 38 30 34 34 0 0 0 0 0 0 0 0
41 43 28 26 36 24 33 36 26 33 44 23 29 40 0 0 0 0 0 0 0 0
41 31 37 32 24 28 31 39 31 22 42 28 37 30 0 0 0 0 0 0 0 0
41 36 20 25 35 28 29 30 25 27 25 35 29 33 0 0 0 0 0 0 0 0
41 28 25 36 38 24 33 32 27 36 25 28 34 34 0 0 0 0 0 0 0 0
41 37 41 36 40 37 24 27 20 39 32 30 34 26 0 0 0 0 0 0 0 0
41 32 26 34 28 32 32 26 33 31 36 35 31 23 0 0 0 0 0 0 0 0
41 27 31 33 26 24 37 30 32 29 28 26 32 31 0 0 0 0 0 0 0 0
41 30 23 25 30 25 23 30 24 30 19 26 39 30 0 0 0 0 0 0 0 0
41 29 38 39 33 30 32 32 37 27 25 41 29 32 0 0 0 0 0 0 0 0
41 29 31 33 30 30 32 39 37 25 35 19 30 51 0 0 0 0 0 0 0 0
41 25 20 22 33 29 39 31 29 30 36 36 34 38 0 0 0 0 0 0 0 0
41 19 30 33 37 23 26 29 37 34 28 35 27 24 0 0 0 0 0 0 0 0
41 41 23 40 27 32 33 28 36 26 28 45 32 30 0 0 0 0 0 0 0 0
41 33 36 29 34 23 36 31 25 27 25 30 37 20 0 0 0 0 0 0 0 0
41 24 33 26 38 23 29 23 30 28 41 36 35 23 0 0 0 0 0 0 0 0
41 35 31 34 34 28 29 38 18 27 33 31 37 37 0 0 0 0 0 0 0 0
41 36 41 30 20 30 35 45 29 37 38 25 26 44 0 0 0 0 0 0 0 0
41 43 33 33 27 41 19 27 33 25 30 23 36 31 0 0 0 0 0 0 0 0
41 26 26 32 30 30 25 39 33 32 32 35 29 37 0 0 0 0 0 0 0 0
41 45 29 34 38 36 25 29 37 34 37 36 26 38 0 0 0 0 0 0 0 0
41 30 43 34 25 35 29 28 30 33 27 27 39 28 0 0 0 0 0 0 0 0
41 32 27 39 36 38 28 34 44 31 32 37 30 35 0 0 0 0 0 0 0 0
41 28 30 37 35 39 16 39 30 25 27 30 46 28 0 0 0 0 0 0 0 0
41 35 27 28 30 39 35 19 23 33 39 35 43 30 0 0 0 0 0 0 0 0
41 30 31 29 34 28 37 33 22 34 43 37 32 45 0 0 0 0 0 0 0 0
41 30 27 39 23 25 24 39 38 28 28 28 29 30 0 0 0 0 0 0 0 0
41 27 28 26 29 37 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
41 27 25 21 32 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
41 35 31 40 35 22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
41 312
But why the other chips with capital "A" is not changed their frequency from 55? Day after day frequency is not changing...
A lowercase 'a' starting the string means you have turned off autotune for that chips and manually set the values...
Another question:
What means if one chip shows aifdso 240?
Like the first one
http://s020.radikal.ru/i716/1311/ea/46685811bb64.jpg
And it seems that autotune is not working, on the screenshot I manually worked with 2,5,12 chips. The first one is setted up to AIfDSo 55 but automatically falls down to aifdso 240. The second chip was turned off by me because of very low hashrate (200Mhs).
Can you tell something about the first chip? And maybe you know what should I do for 2,5,12 chips to increase their hashrate?
Thank you!
ps: overclocking to 0.95v and oil cooling change nothing...
What means if one chip shows aifdso 240?
Like the first one
http://s020.radikal.ru/i716/1311/ea/46685811bb64.jpg
And it seems that autotune is not working, on the screenshot I manually worked with 2,5,12 chips. The first one is setted up to AIfDSo 55 but automatically falls down to aifdso 240. The second chip was turned off by me because of very low hashrate (200Mhs).
Can you tell something about the first chip? And maybe you know what should I do for 2,5,12 chips to increase their hashrate?
Thank you!
ps: overclocking to 0.95v and oil cooling change nothing...
I've some questions ... maybee some one has a good solution ...
I'm using a multi rail atx psu ... 1200 Watt ... at which 2 miners are connected.
So if I want to do some overclocking at the moment I've to shut down both miners ...
What solution do I have to only shut down the miner Im modding ....
1) just pull out the pcie ... one by one on the miner? dangerous? also is reinserting to have it on again ... a problem when connecting one pcie after the other when psu is on?
2) is there a switch for a pcie cable? ...
3) a second psu ... yep i got one but i would be happy to only use ... one ...
thanx or your help
It may trigger the TVS diode on your raspberryPi and destroy it. I would suggest turning off the PSU instead of yanking out PCIE power cables. I'm using a multi rail atx psu ... 1200 Watt ... at which 2 miners are connected.
So if I want to do some overclocking at the moment I've to shut down both miners ...
What solution do I have to only shut down the miner Im modding ....
1) just pull out the pcie ... one by one on the miner? dangerous? also is reinserting to have it on again ... a problem when connecting one pcie after the other when psu is on?
2) is there a switch for a pcie cable? ...
3) a second psu ... yep i got one but i would be happy to only use ... one ...
thanx or your help
Even without overclocking, a full rig pulls something like 25A from the 12V input. You'll need a much heftier switch than that.
10A 250V switch should do fine. Low voltage DC is much easier on the switch.I've used a 10A 250V switch on my electric kick scooter for years. Peak current >100A and it's still working fine after probably 2000 on/off cycles.
Why are you compiling chainminer? If all you're trying to do is change clock speeds, just edit /opt/bitfury/best.cnf and reboot. If that file doesn't exist yet, copy /run/shm/.stat.log to /opt/bitfury/best.cnf first.
1. How i copy /run/shm/.stat.log to /opt/bitfury/best.cnf ?
2. How i get /run/shm/.stat.log ?
1. cp /run/shm/.stat.log /opt/bitfury/best.cnf
2. If /run/shm/.stat.log doesn't exist, let the miner run for at least 5 minutes and it should be there.
Jump to: