[Guide] Dogie's Comprehensive Bitmain Antminer S3 Setup [HD] - page 26.

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: zulover on August 01, 2014, 01:56:58 PM

how far can you over clock with just 2 pci e leads?

As far as you want to burn your PSU up. At stock you're at about 180W per PCI-E, the maximum implementation I've seen in the wild is 240W and that's so far over the specifications for 18AWG its insane.

zulover

hero member

Activity: 583

Merit: 500

how far can you over clock with just 2 pci e leads?

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: Omarko on August 01, 2014, 03:54:40 AM

how do I find out what firmware I am running ?

I tried :

How can I tell what firmware version I have now? - Navigate to System -> Overview and look at "File System Version".

but there is NO "File System Version" anywhere

is is all I see:

also, I assume the X is no good :

how can I fix this ?

You might get the chip back, you might not. I had the same at start and then that chip came on line later. Either way, its 3% hash rate, not more than $10.

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: Omarko on July 31, 2014, 11:32:23 PM

EDIT: did the DHCP thing and its hashing now.

another question, why there are so many discarded?

Discards mean nothing, don't worry.

jccardenas

newbie

Activity: 4

Merit: 0

Quote from: sdcrypto on July 25, 2014, 07:12:56 AM

Correct. There is no LAN activity at all on the device. The OS is not booting. Red light on back just blinks and the only green light that is lit and blinking is on the NIC, but there is no traffic going over the wire. I'm pretty sure the firmware went terribly wrong. After clicking to flash the device, I walked away and when I came back I had page not found in the browser.

After repeated emails, still haven't heard back from Bitmain.

.

Hi, Did you get any support on how to fix this problem? My unit still dead, please let me know if you fixed, Thanks

Omarko

member

Activity: 72

Merit: 10

how do I find out what firmware I am running ?

I tried :

How can I tell what firmware version I have now? - Navigate to System -> Overview and look at "File System Version".

but there is NO "File System Version" anywhere

is is all I see:

also, I assume the X is no good :

how can I fix this ?

Omarko

member

Activity: 72

Merit: 10

thats what I thought, thanks.

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: Omarko on August 01, 2014, 12:39:49 AM

sorry I dont understand what it means about the queue changes etc, what is it good for? Why would I want to reduce processor load?

thanks

EDIT: also, do I need to change frequency ? My average after 46 mins is at 441.66gh/s. Few ppl mentioned lowering to 212.5 ?

You are good to go...STOCK freq ...and STOCK Hash...Leave it alone... Wink

"If it is working...don't fix it..."... Grin

ZiG

Omarko

member

Activity: 72

Merit: 10

sorry I dont understand what it means about the queue changes etc, what is it good for? Why would I want to reduce processor load?

thanks

EDIT: also, do I need to change frequency ? My average after 46 mins is at 441.66gh/s. Few ppl mentioned lowering to 212.5 ?

edonkey

legendary

Activity: 1150

Merit: 1004

Quote from: Omarko on July 31, 2014, 11:32:23 PM

another question, why there are so many discarded?

Pardon the crosspost, but this might help (from the author of the underlying mining software):

https://bitcointalksearch.org/topic/m.8056057

If you want to reduce the processor load, you can consider changing the queue option to 1:

https://bitcointalksearch.org/topic/m.8124268

My recommendation, gleaned from the 180 pages of that thread, is to *only* change the queue option, not --scan-time or --expiry.

Omarko

member

Activity: 72

Merit: 10

can someone help please?

I just got my s3, setup all the pools (I entered same info for all three as I only have one worker)

for pool I use slush sio I entered

stratum+tcp://stratum.bitcoin.cz:3333

then clicked save ad apply but under miner status, nothing is happening.

I plugged power to the PCIe connectors closest to LAN connector.

any ideas why?

EDIT: did the DHCP thing and its hashing now.

another question, why there are so many discarded?

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: Miasma on July 30, 2014, 11:21:18 AM

Quote from: dogie on July 24, 2014, 01:32:25 PM

Quote from: MoneyMuscles on July 24, 2014, 11:56:28 AM

recommended difficulty for one of these?

512.

My S3s like 4096 Grin

Doesn't make much difference other than bandwidth down but variance up.

Miasma

member

Activity: 110

Merit: 10

Quote from: dogie on July 24, 2014, 01:32:25 PM

Quote from: MoneyMuscles on July 24, 2014, 11:56:28 AM

recommended difficulty for one of these?

512.

My S3s like 4096 Grin

Collider

hero member

Activity: 714

Merit: 500

I has miner:

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: TR8888 on July 28, 2014, 06:07:08 PM

Thanks for the guide dogie.

No problem

CDNinATL

newbie

Activity: 30

Merit: 0

Just got mine today from China. Took me half the time to set it up compared to my S1. What actually took me some time, was remember the path to the config file so I could look at the settings if I decide to overclock. Grin

But all is good. It's running quite nicely!

TR8888

hero member

Activity: 525

Merit: 500

Thanks for the guide dogie.

SubtleSmoke

newbie

Activity: 4

Merit: 0

per my previous edit, I'll be getting 2 new PSU's in later today. I also have two S3 machines, though due to only having one PSU, only one is running.

Atomar

sr. member

Activity: 280

Merit: 250

Try flipping the PCI-E connector or an different on or diff. powersupply ...

SubtleSmoke

newbie

Activity: 4

Merit: 0

Yeah, I noticed that a few minutes ago looking at the specs. I still think it might be the power supply, but I'm not sure if it's possible. The T/S Info dogie posted earlier shows that a faulty board might show up with all X's, and this one is completely not on the board.

Topic: [Guide] Dogie's Comprehensive Bitmain Antminer S3 Setup [HD] - page 26. (Read 137440 times)