Pages:
Author

Topic: [GUIDE] Innosilicon [A1 Booster + A2 Terminator] Support/Tuning - page 5. (Read 29744 times)

sr. member
Activity: 434
Merit: 265

Lol why static ip?? DHCP exist from long time....

This way you know ... which miner is at which position ... which might be important if you use a few of them ....
sr. member
Activity: 267
Merit: 250
Learn to go against your mind
sr. member
Activity: 434
Merit: 265
MinerEU https://github.com/MinerEU/scripta_a2
A2 controller update:

Just so everyone knows, added new feature in this update

1, switch pools on the fly without restart
2, pool priority setting
3, frequency setting for each blade(over clock tuning )
4, temperature sensor display
5, core info on each chip



Are you sure, you have uploaded the right version? I installed posted version but I don't have these functions. Seems like it is a previous version.

1. The image I posted is from Innosilicon, probably an other fork then the one from minereu ... there are a few functions that aren't in the minereu version :-)
2.switching pools, pool priority setting, frequ setting, temp sensor, core info on each chip  ... are all included.
3.  .... however the cgminer might be adapted too in this image ... as innosilicon is the only one having closed cgminer source ... for the A2

there are a few functions more like the logo and the static ip ...

at least I can say that the current performance of the unit I have tested the new image is runing at 92-93mh on pool side.





member
Activity: 97
Merit: 10
MinerEU https://github.com/MinerEU/scripta_a2
A2 controller update:

Just so everyone knows, added new feature in this update

1, switch pools on the fly without restart
2, pool priority setting
3, frequency setting for each blade(over clock tuning )
4, temperature sensor display
5, core info on each chip



Are you sure, you have uploaded the right version? I installed posted version but I don't have these functions. Seems like it is a previous version.
sr. member
Activity: 434
Merit: 265
sr. member
Activity: 364
Merit: 250
I picked up a Terminator for the electric savings alone. Competition's about to heat up amongst the manufacturers, so it'll be an interesting year.
legendary
Activity: 1405
Merit: 1001
I just installed the latest software and also did a git update.
But after changing pool information my hashrate looks like this:


Although I wouldn't mind having that hashrate they are not the correct values.
Right after starting the miner (before entering my pool data) it shows correct values while hashing with the default parameters.
Looking at the pool only ~22MH/s arrive here for a A2Mini.
Is there anyone else using the new version?
full member
Activity: 346
Merit: 100
The MinerEU firmware has been updated and is also reporting how many cores and temperature of the cores now. please update

new miners will still have 6 module but each pcb panel will have 12 chips instead of 8 chips. which offer a total hash rate of 120M


Are you selling these 12 chip versions? I would be interested in buying a unit that could do 120Mh/s
legendary
Activity: 1405
Merit: 1001
MinerEU https://github.com/MinerEU/scripta_a2
A2 controller update:

3, frequency setting for each blade(over clock tuning )

Does using 1280Mhz void warranty?
sr. member
Activity: 244
Merit: 250
MinerEU https://github.com/MinerEU/scripta_a2
A2 controller update:

Just so everyone knows, added new feature in this update

1, switch pools on the fly without restart
2, pool priority setting
3, frequency setting for each blade(over clock tuning )
4, temperature sensor display
5, core info on each chip





full member
Activity: 157
Merit: 100
Is 1280Mhz official supported or does using it void warranty?

Generally all first batch (early) A2s run better on 1200 Mhz, while second batch pieces benefits from 1280 Mhz, which is official. Ive seen many A2s to confirm this.
newbie
Activity: 15
Merit: 0
It was implemented in the last version of Innosilicon software. BUT not all blades correctly support it. Some A2 chips are better than other to handle this power. I had to tune my A2s in order to have some blades @1200 and some @1280. I did see an improvement for the blades that supports this increase of frequency.
For the one who don't, the error rate EXPLODES !!!!
legendary
Activity: 1405
Merit: 1001
Is 1280Mhz official supported or does using it void warranty?
newbie
Activity: 1
Merit: 0
pls add to scrypta_a2 same function Firmware 2014-05-21 to change 1000 MHz, 1200 MHz, and 1280MHz. Standard firmware I changed it, very comfortable, and scrypta_a2 can not change, tell me where this option pls
legendary
Activity: 1167
Merit: 1009
So rumor is there is a 140MH unit in the works    Grin

The products of Innosilicon A1 and A2 consists of modules with each 8 chips on it.

the 140MH miner would just have 6 (84mh) + 4 (56mh) modules ...

When I was talking to them they said they might actually increase the chip count on each board for the upgraded version
sr. member
Activity: 244
Merit: 250
The MinerEU firmware has been updated and is also reporting how many cores and temperature of the cores now. please update

new miners will still have 6 module but each pcb panel will have 12 chips instead of 8 chips. which offer a total hash rate of 120M
sr. member
Activity: 434
Merit: 265
IMAGES:

- A2 Image Orginal (2014-05-21) user: pi / psw: innosilicon


added user and psw to the image ...
sr. member
Activity: 434
Merit: 265
So rumor is there is a 140MH unit in the works    Grin

The products of Innosilicon A1 and A2 consists of modules with each 8 chips on it.

the 140MH miner would just have 6 (84mh) + 4 (56mh) modules ...
legendary
Activity: 1167
Merit: 1009
So rumor is there is a 140MH unit in the works    Grin
member
Activity: 70
Merit: 10
jersey 4 life !!!
thank you for this thread !!! +1
Pages:
Jump to: