[GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 38.

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Quote from: Mattthev on October 23, 2017, 01:16:34 PM

Quote from: greatauror28 on October 23, 2017, 11:44:19 AM

Hey Matt, do you have an experience of a Nitro+ 580 4gb hitting 31Mh stable?

I'm running 8x right now (just finished setting it up last night) and I could get them to run at 30.5 stable for >12hrs now. You think they can push 31?

If you are using timings from the PBE 1.6, so probably yes.

Thanks!

And if things go south, i'd just change them back to the lower mem clock settings.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: greatauror28 on October 23, 2017, 11:44:19 AM

Hey Matt, do you have an experience of a Nitro+ 580 4gb hitting 31Mh stable?

I'm running 8x right now (just finished setting it up last night) and I could get them to run at 30.5 stable for >12hrs now. You think they can push 31?

If you are using timings from the PBE 1.6, so probably yes.

Quote from: mhailes on October 22, 2017, 10:26:55 PM

Mattthev,

Thanks for the great tutorial

running RX 470 4G with Elpida memory and mining ETH with it.

Stock: 20MHs
After following the guide and a couple of questions: 26.4 MHs

Happy with this for now.
More tuning later.

Mark

You need also OC the memory.

Quote from: heavyarms1912 on October 20, 2017, 02:49:20 PM

What does the temperature target in BIOS indicate. The values are 70 on RX 570 Gaming X. Will the card throttle if it crosses this limit? RX 580 Nitro+ has this at 75.

@Mattthev maybe you would like to add a note in the OP. While using ATIflash not to have HWInfo or other softwares that reads off BIOS. They interrupt the flashing process. Have experienced this several times.

I've never had problem with this. It's only recommended to close MSI Afterburner or other OC utilities.

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Hey Matt, do you have an experience of a Nitro+ 580 4gb hitting 31Mh stable?

I'm running 8x right now (just finished setting it up last night) and I could get them to run at 30.5 stable for >12hrs now. You think they can push 31?

mhailes

newbie

Activity: 2

Merit: 0

Mattthev,

Thanks for the great tutorial

running RX 470 4G with Elpida memory and mining ETH with it.

Stock: 20MHs
After following the guide and a couple of questions: 26.4 MHs

Happy with this for now.
More tuning later.

Mark

heavyarms1912

full member

Activity: 729

Merit: 114

What does the temperature target in BIOS indicate. The values are 70 on RX 570 Gaming X. Will the card throttle if it crosses this limit? RX 580 Nitro+ has this at 75.

@Mattthev maybe you would like to add a note in the OP. While using ATIflash not to have HWInfo or other softwares that reads off BIOS. They interrupt the flashing process. Have experienced this several times.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Links updated

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: RfBTC on October 13, 2017, 10:35:04 AM

Yes i mean what edit in timing for better XMR hashrate ?

thanks

Read this thread for start: https://bitcointalksearch.org/topic/custom-ram-timings-for-gpus-with-gddr5-download-links-updated-1758267

RfBTC

member

Activity: 68

Merit: 10

Quote from: JuanHungLo on October 13, 2017, 06:29:51 AM

Quote from: Mattthev on October 13, 2017, 04:05:31 AM

Added Monero and Vega - the definitive guide by Hellae
Thanks spectune

I followed this guide exactly, only with 4 cards per rig, and it works perfectly. Highly recommended.

Yes, its awesome, the matter is the Windows limit 8 GPU AMD max per rig Cry

P.D. there are any way to "unlock" by win registry the 8 GPU AMD max ?

RfBTC

member

Activity: 68

Merit: 10

Quote from: Mattthev on October 13, 2017, 02:20:55 AM

Quote from: RfBTC on October 13, 2017, 12:51:38 AM

Hi guys, what values / straps needed to be modded for XMR ? (i have MSI RX570 4GB Hynix) thanks

You mean like bios mod? Or what to edit in timing strap for better XMR hashrate?

Yes i mean what edit in timing for better XMR hashrate ?

thanks

vasyako

newbie

Activity: 1

Merit: 0

Hi guys
This forum is also popular in Russia Grin

Here is a review of mining on Yeston RX580 and the author writes that he found timings exactly here
He was able to overclock his videocard to 30.5 mh/s (Elpida)

naeme18720

sr. member

Activity: 290

Merit: 250

Hi

Please help for bios my GPU
Rx 470 sapphire nitro oc memory hynix
I flashed in 1130 GPU and 1945 memory but
watts up hashrat 27 mh ETH
Best ROM for this GPU where please please please
Tell to me

tarui

sr. member

Activity: 294

Merit: 250

by chance I saw the reddit link and guide so I tried it out and my results are a little different. I used the "1100MHz HBM @ 905mV" reg file and this is what I got.

https://www.youtube.com/watch?v=8Uq3Om2MXOE

notice the voltages for the core and memory are different from the youtube video by oldcomer?

so far, the highest hashrate for eth is about 43mh/s but my lcd is connected to this card with other software running as well. so this might have impacted performance.
hwinfo shows gpu core using 68w, mem 21w
I manually changed the p7 core clock to 1221mhz in wattman

tarui

sr. member

Activity: 294

Merit: 250

i tried this on a vega 64 but it says unsupported device id ?

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: Mattthev on October 13, 2017, 04:05:31 AM

Added Monero and Vega - the definitive guide by Hellae
Thanks spectune

I followed this guide exactly, only with 4 cards per rig, and it works perfectly. Highly recommended.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Added Monero and Vega - the definitive guide by Hellae
Thanks spectune

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: RfBTC on October 13, 2017, 12:51:38 AM

Hi guys, what values / straps needed to be modded for XMR ? (i have MSI RX570 4GB Hynix) thanks

You mean like bios mod? Or what to edit in timing strap for better XMR hashrate?

RfBTC

member

Activity: 68

Merit: 10

Hi guys, what values / straps needed to be modded for XMR ? (i have MSI RX570 4GB Hynix) thanks

arjet

newbie

Activity: 15

Merit: 0

Quote from: Mattthev on October 09, 2017, 01:09:19 AM

Quote from: JuanHungLo on October 08, 2017, 11:13:45 AM

Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.

Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.

What Hynix type do you have?

Quote from: arjet on October 08, 2017, 12:10:18 PM

dear all, i have power color 470 4gb mining edition with elpida memory, i mod bios same like what i did to my 470 4gb gaming edition. but why this mining edition draw more watt when i check in GPUZ? mining edition brown box draw 85watt, and gaming only 65 watt. is there any how i can mod my mining edition so at least 65 watt in gpuz? i mod only strap 1500 up. that is.

thanks, hope somebody might help my. regards

If you only want lower power consumption you can just undervolt the core.

doest work, it still 85 watt in GPUz, i did the same methode with mya 470 4gb gamining hynix can reach 65 in GPUZ. i dont know why this 470 4gb elpida draw so much power, and the speed lower as well. thanks

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: JuanHungLo on October 09, 2017, 05:56:49 AM

Quote from: Mattthev on October 09, 2017, 01:09:19 AM

Quote from: JuanHungLo on October 08, 2017, 11:13:45 AM

Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.

Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.

What Hynix type do you have?...

H5GQ8H24MJ

Ok, that's not the one I need. Have you used the timing strap from PBE 1.6? Send me PM I will give you improved version.

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: Mattthev on October 09, 2017, 01:09:19 AM

Quote from: JuanHungLo on October 08, 2017, 11:13:45 AM

Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.

Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.

What Hynix type do you have?...

H5GQ8H24MJ

Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 38. (Read 221013 times)