If someone is faster, add p'lwease a Content Slider Box or iframe etc. or similar to switch Pools, it's annoying to switch Pools with Hashra Kontrola.
That's up next.
Failover support in development
Topic: HASHRA CONTROLA on Raspberry Pi for Gridseed - page 16. (Read 39628 times)
That's up next.
Failover support in development
If someone is faster, add p'lwease a Content Slider Box or iframe etc. or similar to switch Pools, it's annoying to switch Pools with Hashra Kontrola.
Version 1.3 of HASHRA CONTROLA will be released this week. We're testing it right now.
new features
screenshot:
https://www.dropbox.com/s/galelbi3c9il2ao/Screenshot%202014-04-02%2019.42.28.png
- removed bfg/cgminer stats which were confusing everybody.
- manual restart
- manual reboot
- clock speed can go all the way to 1200mhz now (not advisable, but for all you modders out there...it will be available)
- system settings with:
-- scheduled restart scheme in hours (0 hours for never)
-- SHA cores configuration for dual mode. You can configure the amount of SHA cores to be enabled (max 16 cores) more cores -> higher sha hashrate but will lower scrypt hashrate and vice versa.
-- you have to login with default user root / root to HASHRA CONTROLA webconsole. you can change this password if you want, in system settings.
new features
screenshot:
https://www.dropbox.com/s/galelbi3c9il2ao/Screenshot%202014-04-02%2019.42.28.png
- removed bfg/cgminer stats which were confusing everybody.
- manual restart
- manual reboot
- clock speed can go all the way to 1200mhz now (not advisable, but for all you modders out there...it will be available)
- system settings with:
-- scheduled restart scheme in hours (0 hours for never)
-- SHA cores configuration for dual mode. You can configure the amount of SHA cores to be enabled (max 16 cores) more cores -> higher sha hashrate but will lower scrypt hashrate and vice versa.
-- you have to login with default user root / root to HASHRA CONTROLA webconsole. you can change this password if you want, in system settings.
That's great news!
Version 1.3 of HASHRA CONTROLA will be released this week. We're testing it right now.
new features
screenshot:
https://www.dropbox.com/s/galelbi3c9il2ao/Screenshot%202014-04-02%2019.42.28.png
- removed bfg/cgminer stats which were confusing everybody.
- manual restart
- manual reboot
- clock speed can go all the way to 1200mhz now (not advisable, but for all you modders out there...it will be available)
- system settings with:
-- scheduled restart scheme in hours (0 hours for never)
-- SHA cores configuration for dual mode. You can configure the amount of SHA cores to be enabled (max 16 cores) more cores -> higher sha hashrate but will lower scrypt hashrate and vice versa.
-- you have to login with default user root / root to HASHRA CONTROLA webconsole. you can change this password if you want, in system settings.
new features
screenshot:
https://www.dropbox.com/s/galelbi3c9il2ao/Screenshot%202014-04-02%2019.42.28.png
- removed bfg/cgminer stats which were confusing everybody.
- manual restart
- manual reboot
- clock speed can go all the way to 1200mhz now (not advisable, but for all you modders out there...it will be available)
- system settings with:
-- scheduled restart scheme in hours (0 hours for never)
-- SHA cores configuration for dual mode. You can configure the amount of SHA cores to be enabled (max 16 cores) more cores -> higher sha hashrate but will lower scrypt hashrate and vice versa.
-- you have to login with default user root / root to HASHRA CONTROLA webconsole. you can change this password if you want, in system settings.
Nice, I was just talking about having the option to restart/reboot via the web interface.
What is the reasoning behind only allowing overclock in 50mhz increments?
Sounds Great.
THX
THX
Version 1.3 of HASHRA CONTROLA will be released this week. We're testing it right now.
new features
screenshot:
https://www.dropbox.com/s/galelbi3c9il2ao/Screenshot%202014-04-02%2019.42.28.png
- removed bfg/cgminer stats which were confusing everybody.
- manual restart
- manual reboot
- clock speed can go all the way to 1200mhz now (not advisable, but for all you modders out there...it will be available)
- system settings with:
-- scheduled restart scheme in hours (0 hours for never)
-- SHA cores configuration for dual mode. You can configure the amount of SHA cores to be enabled (max 16 cores) more cores -> higher sha hashrate but will lower scrypt hashrate and vice versa.
-- you have to login with default user root / root to HASHRA CONTROLA webconsole. you can change this password if you want, in system settings.
new features
screenshot:
https://www.dropbox.com/s/galelbi3c9il2ao/Screenshot%202014-04-02%2019.42.28.png
- removed bfg/cgminer stats which were confusing everybody.
- manual restart
- manual reboot
- clock speed can go all the way to 1200mhz now (not advisable, but for all you modders out there...it will be available)
- system settings with:
-- scheduled restart scheme in hours (0 hours for never)
-- SHA cores configuration for dual mode. You can configure the amount of SHA cores to be enabled (max 16 cores) more cores -> higher sha hashrate but will lower scrypt hashrate and vice versa.
-- you have to login with default user root / root to HASHRA CONTROLA webconsole. you can change this password if you want, in system settings.
My Gridseeds just restart a few times a day.
Can Hashra be used with Teamviewer?
Can Hashra be used with Teamviewer?
for me hashra crashes after a few hours, tested with 19 miners, and i cant simply open the webpage after a few hours
Mine doesnt crash but it restarts once or twice a day. I am guessing that is built into the Chron by default. It's quick and I don't mind much although it should be configurable. Does Hashra participate in the conversation about their image at all?
I am having great luck with the 1.2.7 image for my seeds. I am in the process of doing the modifications tot overclock and needing 950mhz as an option. It would be great if we could have increased capabilities in this regard. I would contribute a small reward to this.
Same here regarding "luck"... I have haven't had any drop in over 36hrs now..
edit: nvm.. shouldn't have said anything..
looks like I have a PI that is completely down and needing a reboot.. no way to do that remotely.. and even if I could SSH in no one knows the root/pw
for me hashra crashes after a few hours, tested with 19 miners, and i cant simply open the webpage after a few hours
I am having great luck with the 1.2.7 image for my seeds. I am in the process of doing the modifications tot overclock and needing 950mhz as an option. It would be great if we could have increased capabilities in this regard. I would contribute a small reward to this.
Yes it depends on the difficulty and how many hashes the other players have. And it depends if you come in a round where everything is allredy counted. Then you get a high rejecto rate.
But GPU´s seem to have a lower rejecto. rate. Looks like:-)
Do you know anything about " Hardware errors "? Do you have shown hardware errors on your set up?
What means " work discarded "?
Thx and good mining to you
But GPU´s seem to have a lower rejecto. rate. Looks like:-)
Do you know anything about " Hardware errors "? Do you have shown hardware errors on your set up?
What means " work discarded "?
Thx and good mining to you
Ive used BFMiner, LightningAsic Controller and Hashra Controla, all seem to give around 2% HW errors. Some seem to display them differently, eg in Hashra and Lightningasic it tells me which controllers give errors and its pretty even at about 2% each miner give or take.
In BFMiner the figure is 2% but one or two miners are giving all the errors and the rest show none.
So its pretty weird but overall I think its normal - to have a small amount with these devices. Like I said for some reason pools seems to make a big difference
Yes it depends on the difficulty and how many hashes the other players have. And it depends if you come in a round where everything is allredy counted. Then you get a high rejecto rate.
But GPU´s seem to have a lower rejecto. rate. Looks like:-)
Do you know anything about " Hardware errors "? Do you have shown hardware errors on your set up?
What means " work discarded "?
Thx and good mining to you
But GPU´s seem to have a lower rejecto. rate. Looks like:-)
Do you know anything about " Hardware errors "? Do you have shown hardware errors on your set up?
What means " work discarded "?
Thx and good mining to you
Hello Miners,
I have problems with my Gridseed.
While running Hashra Controla 1.27. newest update. My Dashboard still shows Harware errors and much more.
CONTROLA
Running in SCRYPT mode
Mining Session Overview (02 hrs 14 mins 53 seconds )
3.605 Mh/s current hashrate
3.623 Mh/s avg hashrate in last 5m
687 / 33 Acc./Rej. 4.80 % rejection rate
0.047 Work utility
5 Found blocks.
2735 Work discarded
0 Work stale
3 Hardware errors
SCRYPT Miners hashrate 3620 Kh/s
362 Kh/s
Scrypt Miner 1
Mining...77/79 (2.53%)
362 Kh/s
Scrypt Miner 2
Mining...52/53 (1.89%)
362 Kh/s
Scrypt Miner 3
Mining...46/52 (11.54%)
362 Kh/s
Scrypt Miner 4
Mining...78/83 (6.02%)
362 Kh/s
Scrypt Miner 5
Mining...76/81 (6.17%)
362 Kh/s
Scrypt Miner 6
Mining...83/87 (4.6%)
362 Kh/s
Scrypt Miner 7
Mining...65/67 (2.99%)
362 Kh/s
Scrypt Miner 8
Mining...67/70 (4.29%)
362 Kh/s
Scrypt Miner 9
Mining...66/69 (4.35%)
362 Kh/s
Scrypt Miner 10
Mining...77/79 (2.53%)
What do you think? Looks this normal? What can I try.
Big THX for advice.
I have problems with my Gridseed.
While running Hashra Controla 1.27. newest update. My Dashboard still shows Harware errors and much more.
CONTROLA
Running in SCRYPT mode
Mining Session Overview (02 hrs 14 mins 53 seconds )
3.605 Mh/s current hashrate
3.623 Mh/s avg hashrate in last 5m
687 / 33 Acc./Rej. 4.80 % rejection rate
0.047 Work utility
5 Found blocks.
2735 Work discarded
0 Work stale
3 Hardware errors
SCRYPT Miners hashrate 3620 Kh/s
362 Kh/s
Scrypt Miner 1
Mining...77/79 (2.53%)
362 Kh/s
Scrypt Miner 2
Mining...52/53 (1.89%)
362 Kh/s
Scrypt Miner 3
Mining...46/52 (11.54%)
362 Kh/s
Scrypt Miner 4
Mining...78/83 (6.02%)
362 Kh/s
Scrypt Miner 5
Mining...76/81 (6.17%)
362 Kh/s
Scrypt Miner 6
Mining...83/87 (4.6%)
362 Kh/s
Scrypt Miner 7
Mining...65/67 (2.99%)
362 Kh/s
Scrypt Miner 8
Mining...67/70 (4.29%)
362 Kh/s
Scrypt Miner 9
Mining...66/69 (4.35%)
362 Kh/s
Scrypt Miner 10
Mining...77/79 (2.53%)
What do you think? Looks this normal? What can I try.
Big THX for advice.
What pool are you on? I noticed similar on a high difficulty pool but got good results on low difficulty (less rejects/errors)
Hello Miners,
I have problems with my Gridseed.
While running Hashra Controla 1.27. newest update. My Dashboard still shows Harware errors and much more.
CONTROLA
Running in SCRYPT mode
Mining Session Overview (02 hrs 14 mins 53 seconds )
3.605 Mh/s current hashrate
3.623 Mh/s avg hashrate in last 5m
687 / 33 Acc./Rej. 4.80 % rejection rate
0.047 Work utility
5 Found blocks.
2735 Work discarded
0 Work stale
3 Hardware errors
SCRYPT Miners hashrate 3620 Kh/s
362 Kh/s
Scrypt Miner 1
Mining...77/79 (2.53%)
362 Kh/s
Scrypt Miner 2
Mining...52/53 (1.89%)
362 Kh/s
Scrypt Miner 3
Mining...46/52 (11.54%)
362 Kh/s
Scrypt Miner 4
Mining...78/83 (6.02%)
362 Kh/s
Scrypt Miner 5
Mining...76/81 (6.17%)
362 Kh/s
Scrypt Miner 6
Mining...83/87 (4.6%)
362 Kh/s
Scrypt Miner 7
Mining...65/67 (2.99%)
362 Kh/s
Scrypt Miner 8
Mining...67/70 (4.29%)
362 Kh/s
Scrypt Miner 9
Mining...66/69 (4.35%)
362 Kh/s
Scrypt Miner 10
Mining...77/79 (2.53%)
What do you think? Looks this normal? What can I try.
Big THX for advice.
I have problems with my Gridseed.
While running Hashra Controla 1.27. newest update. My Dashboard still shows Harware errors and much more.
CONTROLA
Running in SCRYPT mode
Mining Session Overview (02 hrs 14 mins 53 seconds )
3.605 Mh/s current hashrate
3.623 Mh/s avg hashrate in last 5m
687 / 33 Acc./Rej. 4.80 % rejection rate
0.047 Work utility
5 Found blocks.
2735 Work discarded
0 Work stale
3 Hardware errors
SCRYPT Miners hashrate 3620 Kh/s
362 Kh/s
Scrypt Miner 1
Mining...77/79 (2.53%)
362 Kh/s
Scrypt Miner 2
Mining...52/53 (1.89%)
362 Kh/s
Scrypt Miner 3
Mining...46/52 (11.54%)
362 Kh/s
Scrypt Miner 4
Mining...78/83 (6.02%)
362 Kh/s
Scrypt Miner 5
Mining...76/81 (6.17%)
362 Kh/s
Scrypt Miner 6
Mining...83/87 (4.6%)
362 Kh/s
Scrypt Miner 7
Mining...65/67 (2.99%)
362 Kh/s
Scrypt Miner 8
Mining...67/70 (4.29%)
362 Kh/s
Scrypt Miner 9
Mining...66/69 (4.35%)
362 Kh/s
Scrypt Miner 10
Mining...77/79 (2.53%)
What do you think? Looks this normal? What can I try.
Big THX for advice.
I made a new copy of Hashra, updated it to 1.2.7, then changed the passwords. It was a PITA to figure out, but it's done now. I'm sharing it with you guys to hopefully help save some others' headaches.
https://mega.co.nz/#!8R83Aa5A!YxofpkLC9PCMbpeR63a-YHZ81I7Tc_IS9IePP280wLg
Changes:
Note: My MEGA account is free, so limited bandwidth. I'd appreciate anyone else who can redistribute it.
(Donations welcome if I saved you a headache)
BTC: 1LDYFTZhjHcxSWrgdzAwUgBT1T3b63iMf1
LTC: LcEAuGD8f7T7DRJqdRyTWhJKtGSAXDKQL3
DOGE: D5tEoH3JvXm5HRYtkbAvzun3RQTFg932T8
https://mega.co.nz/#!8R83Aa5A!YxofpkLC9PCMbpeR63a-YHZ81I7Tc_IS9IePP280wLg
Changes:
- 8GB card req (didn't have a 4GB handy)
- Passwords: root/darkknight pi/darkknight
- Default pools on first boot are set to mine for charity
Note: My MEGA account is free, so limited bandwidth. I'd appreciate anyone else who can redistribute it.
(Donations welcome if I saved you a headache)
BTC: 1LDYFTZhjHcxSWrgdzAwUgBT1T3b63iMf1
LTC: LcEAuGD8f7T7DRJqdRyTWhJKtGSAXDKQL3
DOGE: D5tEoH3JvXm5HRYtkbAvzun3RQTFg932T8
i grabbed my sdcard with the hashra image and mounted it in another pi using card reader. chrooted and ran passwd. can get in as root now.
I'm giving this image (w/ ver 1.2.5 update) a try on a few of my GS. One problem, I can't seem to login to ssh.
None of these worked:
pi/hashra
pi/controla
pi/raspberry
hashra/controla
hashra/hashra
root/hashra
root/controla
root/raspberry
Suggestions?
None of these worked:
pi/hashra
pi/controla
pi/raspberry
hashra/controla
hashra/hashra
root/hashra
root/controla
root/raspberry
Suggestions?
same problem here
Me 3 cant get root at all
Can change pool and worker etc no problem but plug in miners and they are detected but nothing happens
With v.1.2.5 in dual mode, I'm only getting 1 MH Scrypt and 60 GH SHA from 10x units... (850 Mhz)
After close inspection of the logs, I noticed that this newer firmware is using both CPUMiner and CGMiner. Aren't they BOTH supposed to be run from CGMiner? How can I go from 3.5 MH to 1 MH in scrypt? I'm really frustrated with these devices, and I really think that I've been duped.
After close inspection of the logs, I noticed that this newer firmware is using both CPUMiner and CGMiner. Aren't they BOTH supposed to be run from CGMiner? How can I go from 3.5 MH to 1 MH in scrypt? I'm really frustrated with these devices, and I really think that I've been duped.
Just a quick question here: does controla support setting the frequency per miner? So not just 1 frequency for all?
One frequency for all... No individual settings.
Thanks.
Jump to: