Hashrate RX 570 - page 12. | Bitcointalksearch.org

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: Jamievs on July 03, 2017, 05:40:51 AM

Quote from: Wolf0 on July 03, 2017, 12:38:29 AM

Quote from: Jamievs on July 01, 2017, 02:29:07 AM

Is anyone else struggling with the new MSI Armor OC RX 570? (4gb hynix). I know these are not the best cards but it was all that was in stock

On stock they do 20-21 MH/s and whatever I do, either the cards crash or the hashrate goes down. Tried mem-strapping, upping the powerlimit, changing the memclock, etc.. Just a note, when you look at the Bios it is an E2 instead of the E1 we had on older cards..

Show cooler - cools only the core, and everything else (including GDDR5) cooks.

I made progress. Close to 27 mh/s per card (with dual mining, but low DCRI) with temps around 60 degrees celcius (Fanspeed 70%). Guess time to learn how to set all the Afterburning settings into the bios so I can swap some rigs over to linux. After the bios mod only 4 cards work in one pc. Roll Eyes

What did you change? I have the same card with 5E2 bios.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: ?? on ??

Hello.

Recently I bought RX 570 4GB Sapphire Nitro+ and I got it with Elpida memory. I flashed it with custom bios and I get 29.1mh/s on 1132/2000 with about 170W usage(!!!!!). Any1 have better bios for power saving ?

Undervolt it.

tf2addict

full member

Activity: 675

Merit: 100

I will rollback the driver but I'm not too worried about Afterburner, using Wattman for now.

I used the Anorek 1500 memshift BIOS and am getting 22.5 Mh/s, 620 Mh/s dual ETH/SC but that's the best I can do. I can change mem clock using Wattman and I see absolutely no change in hash rate either up or down. I verify that the clock actually changed via both Wattman and GPU-Z. That doesn't make sense, I have no idea what the problem is or if this card is just incapable of getting any more out of it than that.

Again, it's a Sapphire RX 570 PULSE 4GB Hynix. This is my first AMD card and I have an XFX RX 570 on the way so I hopefully that one goes a lot easier.

EDIT: Did a clean driver uninstall and tried both 17.7.2 and 17.7.4 (driver only)and Afterburner just will not work on the AMD card (works fine on two Nvidia cards). I can control the fan just fine but the clock sliders are greyed out and are sitting at zero. I can change them but when I click the apply they go back to zero. So frustrating. I've had more trouble with AMD cards. Nvidia cards just work.

maxmad

jr. member

Activity: 56

Merit: 3

i can reach 29+ with 570 sapphire nitro+ .

mem clock can't exceed 2070...

Card seem to have 2 types of mem ( micro+hynix)
have anyone tried to also strap the first 1:xxxx strings referring to micron?

spectune

newbie

Activity: 24

Merit: 0

I got from a RX570 nitro 4GB with Hynix and a strap from bughatti(was the best in test of 6 different) in max 28,5 Mh/s out (tuned with 875mV), with a 580 I got 29,5 Mh/s - all stable. The clock max. 2070MHz.
Just to give you a feeling for realistic values.

Update aug 20th: with the new claymore 9.8 and new AMD beta driver blockchain optimized, I get now 29,7Mh/s with the RX 570 and 30,8Mh/s with the 580
https://postimg.org/image/kou9fjcjd/

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

Quote from: tf2addict on August 01, 2017, 03:35:53 PM

I cannot control anything on my RX 570 except fan speed using Afterburner. When I try to change the memory clock for example it just snaps back to 0. Any idea why?

What Radeon drivers do you have installed, the latest ones break Afterburner support, revert to the drivers before the most current.

Also did use Polaris Bios editor to change the maximum memory clock to 2050?

You should be able to get 28.1-28.2 on that card with the current DAG

tf2addict

full member

Activity: 675

Merit: 100

I cannot control anything on my RX 570 except fan speed using Afterburner. When I try to change the memory clock for example it just snaps back to 0. Any idea why?

tf2addict

full member

Activity: 675

Merit: 100

New Sapphire RX 570 4GB with Hynix, best I can do is 24.17 Mh/s on ETH only and that's using the memory strap BIOS mod. Stock or OC seems to make no difference. I can cut power from 104W to 86W though by changing the power limit to 80% or 90%. Increasing the memory clock from 1750 to anything higher actually cuts my hash rate slightly.

I'm not entirely unhappy with that as my GTX 1060 only gets 23.2 Mh/s but I'd really like to know how people get 28+ Mh/s. Is it just luck of the draw with certain cards?

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

Quote from: SummersideGuy on July 22, 2017, 01:13:07 PM

So far this is the best I can do with the Sapphire 570 ITX with Hynix memory. According the GPU-Z the Power draw is 140w. It is consistant at 28.5Mh/s Eth and 684Mh/s Decred. Dcri set to 24. If I set Decri to 25 I get 28.4Mh.s Eth and 715Mh.s Decred. I have 2 GTX 1060's to test, 4 RX 560's with Micron. and a Gigabyte 580. I have tinkered with one of the 560's just a bit had it at 14.0 Eth and 315 Decred.

Undervolted the Core by 100, both hashrates are still the same and according to GPU-Z card only power draw is 120w, gonna see how stable this is over the weekend

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

So far this is the best I can do with the Sapphire 570 ITX with Hynix memory. According the GPU-Z the Power draw is 140w. It is consistant at 28.5Mh/s Eth and 684Mh/s Decred. Dcri set to 24. If I set Decri to 25 I get 28.4Mh.s Eth and 715Mh.s Decred. I have 2 GTX 1060's to test, 4 RX 560's with Micron. and a Gigabyte 580. I have tinkered with one of the 560's just a bit had it at 14.0 Eth and 315 Decred.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: FFI2013 on June 25, 2017, 12:18:37 AM

Quote from: smaxz on June 24, 2017, 11:05:34 PM

Quote from: FFI2013 on June 24, 2017, 08:32:14 PM

Quote from: Wolf0 on June 22, 2017, 10:18:35 AM

Quote from: FFI2013 on June 22, 2017, 07:40:38 AM

I have a sapphire rx 570 reference style with Samsung Memory what are the best straps to use

xes
Questions like this make me wish I could transport a brick through the internet.

Well bud Im sorry I run my own construction company and have been working 7 days a week getting jobs done doing estimates paperwork taxes payroll you want me to keep going just in case you haven't noticed its summer Im sorry I dont have all day to play with the card Ive had sitting in a box for three weeks cause all my other rx470 and doing just fine also so thanks for the smart ass comment cause every time a homeowner ask me a dumb question about their job or or a friends car Im working on I wish I could plant a fucking hammer or wrench in their head but than I remember some ppl never lifted a hammer in their life or don't have a clue on how to fix their car but I guess your are the man at everything

so just for context, if someone opened a construction company next door to you to compete directly.. and then showed up where you hang out and asked how to use a hammer.. you would be okay with that?

First of all I didn't think we where all competing against each other but anyway every company compete's against each other for work and not all of us know everything about everything every job is different but when we ask each other advice on how they think the best way or quickest way to get part of the job done we give a answer not a smart ass comment but that's what adults do I keep forgetting there's kids here who have never did a hard day's work in their life so of course we would have more respect for each other

The faster you mine, the less I make, assuming we're mining the same coin.

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

Minor tweak, increase memory volts to 925 power consumption range went from 129-134 to 132-138 however. My hashrate for eth is consistant at 28.3 and my Decred rate is consistent at 679.5
What else should I do to this card to get the performance up or am I at the wall? tiny update, I undervolted the GPU Core slightly my Power consumption fluctuates between 125-134w. Consistant hash still of 28.3 and 679-680

goldstrk

newbie

Activity: 18

Merit: 0

I'm able to get ~29MHs on Sapphire RX570 NITRO+ 4G.

It's pulling 145W though...

Straps: 777000000000000022AA1C00315A6B3CA0550F15B68C1506006AE4007C041420CA8980A90200000 01712262B612B3715
Memory mV: 850
GPU Max: 2000
MEM Max: 2250

Looking for any advice which can lower the power drained from the wall and some better straps

.

http://puu.sh/wOtNu/5e46d4f6ea.png

Thanks.

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: adamvp on June 24, 2017, 11:48:57 PM

Sorry I did not notice that as a topic tittle is hashrate of rx 570..
Anyway is really possible to get more than 33mhs stable from any rx card?
And as we have higher and higher dificulty card efficiency (mhs/w will became more and more important).
And I would like you what is the best ratio which you have seen?

Yes, I've done it. And I've not paid attention to my best ratio, but I DID hit 30MH/s on a 580 8G on 0.7875V (Linux.)

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

I picked up an Sapphire 570 Pulse Mini Itx model recently to try out Eth and dual mining, after watching a few videos and reading up I am managing 28.28mh/s Eth and 677mh/s Decr steady on the card, My GPU only power draw according to GPU-Z is 130-134w. I am not sure if this is good/bad/ or about average. I would like to know if it is possible to squeeze more out of the card, but to do that I think it would require custom memory straps/timings am I correct in assuming this.

joaocha

full member

Activity: 254

Merit: 100

Anyone got hands on amd 470 mining cards?

What speeds with custom bios?

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: adamvp on June 24, 2017, 11:23:34 PM

Quote from: Wolf0 on June 22, 2017, 12:42:35 AM

Quote from: FlensGold on June 22, 2017, 12:26:37 AM

Quote from: Wolf0 on June 21, 2017, 11:51:18 PM

Quote from: FlensGold on June 21, 2017, 11:45:09 PM

I have to say that I also bought from Matthev, but unfortunately the Rig was not running stable with them. Matthev advised to reinstall drivers, but that did not work.
I tried another BIOS (http://1stminingrig.com/best-bios-rom-sapphire-nitro-rx-580-8gb-oc-hynix-memory-30-mhs/) for my SAPPHIRE NITRO+ RADEON RX 580 8GB and get 28.1MH/s while pulling 158W (according to GPU-Z).

Any idea if that can still be optimized?

Yes, that's a custom timing set, probably leaked, but I'd give it a B minus.

At least it is running stable ;-)
Any idea what can be achieved with that GPU (Hynix Memory) when having an A+ BIOS? ;-)

I don't do work I would consider near flawless very often - takes WAY too much time. I highly doubt the Hynix memory you speak of (H5GQ8H24MJR) would exceed 33MH/s, at least not for me. Some people may be able to get (some really nice samples of it) there. I would estimate above 32MH/s, low to mid in that range, with a core clock way too high and using way too much power to do it. If you're going for max hash - no matter what - that is.

Do you mean that any rx card could reach over 33mhs? Shocked

Of course let's talk about stable values.
My friend bought bios from eliovp for his hynix 470 and his card reached much over 31mhs on some card, but on the other it only gave him less than 30. So. It dependa of asic and vram quality, too
I have some hynix with stock strap and I have only about 27mhs on it Sad

I didn't say that, not at all. He asked about the Hynix 8GB (MJR) 580 8G.

narba88

newbie

Activity: 4

Merit: 0

Anyone have the original MSI RX 570 Armor OC 4G bios? I seemed to of lost my original BIOS and cant google it Sad

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Wolf0 on July 04, 2017, 03:30:34 AM

Quote from: Mattthev on July 04, 2017, 03:29:11 AM

Well... read this thread or use google how to use MSI AB.
You can't undervolt memory.

I did on a 290X of mine! Also overvolted it. :3

But you're wizard... Harry Cheesy

BTW I meant RX cards Cheesy

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Luisjc69 on July 03, 2017, 06:00:51 AM

Wich driver we need? the new one? Huh

How can I undervolted MEM??

I have only one "VOLT" in my MSI Afterburner (RX580 8Giga Red Devil!)

I have only the possibility to go to -96mV and only for the CORE .....(I think that is for the Core!)

Thx so much for help

Greetings
Luisa

Well... read this thread or use google how to use MSI AB.
You can't undervolt memory.

Topic: Hashrate RX 570 - page 12. (Read 204299 times)