Hashrate RX 570 - page 10. | Bitcointalksearch.org

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: ?? on ??

Quote from: heavyarms1912 on November 07, 2017, 05:48:56 PM

Quote from: ?? on ??

First sorry for my bad england

I have a problem with dual mining. I have 6x MSI RX 570 Armor 4G and i get totaly 170 mh/s and its keep going stable. When i tried to dual mining its going to about 140 mh/s. While im watching always 1 GPU decrease its mh/s and its always changing all of the gpus not just 1 GPU.
And also i have 5x MSI RX 570 Gaming 4G this machine working stable while dual mining. There is only 1 different between the machines i didnt update ethos the latest update because i want to use auto fan option.

-dcri 20

ETH - Total Speed: 151.012 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05
ETH: GPU0 26.371 Mh/s, GPU1 26.756 Mh/s, GPU2 26.352 Mh/s, GPU3 26.441 Mh/s, GPU4 18.154 Mh/s, GPU5 26.937 Mh/s
DCR - Total Speed: 3020.229 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1)
DCR: GPU0 527.426 Mh/s, GPU1 535.110 Mh/s, GPU2 527.041 Mh/s, GPU3 528.829 Mh/s, GPU4 363.077 Mh/s, GPU5 538.746 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 141.141 Mh/s

ETH: 11/06/17-13:08:53 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 151.786 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 20.506 Mh/s, GPU1 26.041 Mh/s, GPU2 26.162 Mh/s, GPU3 25.475 Mh/s, GPU4 27.356 Mh/s, GPU5 26.246 Mh/s
DCR - Total Speed: 3035.708 Mh/s, Total Shares: 10, Rejected: 1
DCR: GPU0 410.116 Mh/s, GPU1 520.818 Mh/s, GPU2 523.234 Mh/s, GPU3 509.493 Mh/s, GPU4 547.123 Mh/s, GPU5 524.924 Mh/s

GPU #5: Ellesmere, 4059 MB available, 32 compute units
ETH - Total Speed: 124.192 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05
ETH: GPU0 21.167 Mh/s, GPU1 21.082 Mh/s, GPU2 26.355 Mh/s, GPU3 18.679 Mh/s, GPU4 18.862 Mh/s, GPU5 18.048 Mh/s
DCR - Total Speed: 2483.846 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1)
DCR: GPU0 423.342 Mh/s, GPU1 421.635 Mh/s, GPU2 527.094 Mh/s, GPU3 373.574 Mh/s, GPU4 377.243 Mh/s, GPU5 360.958 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 141.107 Mh/s

ETH - Total Speed: 141.310 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05
ETH: GPU0 21.609 Mh/s, GPU1 25.920 Mh/s, GPU2 26.955 Mh/s, GPU3 18.809 Mh/s, GPU4 27.303 Mh/s, GPU5 20.715 Mh/s
DCR - Total Speed: 2826.191 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1)
DCR: GPU0 432.170 Mh/s, GPU1 518.391 Mh/s, GPU2 539.092 Mh/s, GPU3 376.174 Mh/s, GPU4 546.055 Mh/s, GPU5 414.309 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 141.097 Mh/s

Using a custom/modded bios? Which one? You're most likely hitting the power limit/voltage limit.

Anyways for the current BIOS you need to decrease the -dcri parameter in claymore config.txt or command line argument. You may use + or - on keyboard numpad to determine the best value for -dcri on the fly while mining to determine the best 2nd coin mining hashrate without impacting on Eth hashrate. Good luck

Thanks for your answer. Im using anoraks/oc bios. Im gonna try decrease -dcri parameter. BTW should i try without anoraks modes.

Anoraks bios are alright. (provided you flash the correct bios for your gpu). I am guesstimating in your case a -dcri value between 13 to 17 should be fine.

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: ?? on ??

First sorry for my bad england

I have a problem with dual mining. I have 6x MSI RX 570 Armor 4G and i get totaly 170 mh/s and its keep going stable. When i tried to dual mining its going to about 140 mh/s. While im watching always 1 GPU decrease its mh/s and its always changing all of the gpus not just 1 GPU.
And also i have 5x MSI RX 570 Gaming 4G this machine working stable while dual mining. There is only 1 different between the machines i didnt update ethos the latest update because i want to use auto fan option.

-dcri 20

ETH - Total Speed: 151.012 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05
ETH: GPU0 26.371 Mh/s, GPU1 26.756 Mh/s, GPU2 26.352 Mh/s, GPU3 26.441 Mh/s, GPU4 18.154 Mh/s, GPU5 26.937 Mh/s
DCR - Total Speed: 3020.229 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1)
DCR: GPU0 527.426 Mh/s, GPU1 535.110 Mh/s, GPU2 527.041 Mh/s, GPU3 528.829 Mh/s, GPU4 363.077 Mh/s, GPU5 538.746 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 141.141 Mh/s

ETH: 11/06/17-13:08:53 - New job from eth-eu.dwarfpool.com:8008
ETH - Total Speed: 151.786 Mh/s, Total Shares: 33, Rejected: 0, Time: 00:05
ETH: GPU0 20.506 Mh/s, GPU1 26.041 Mh/s, GPU2 26.162 Mh/s, GPU3 25.475 Mh/s, GPU4 27.356 Mh/s, GPU5 26.246 Mh/s
DCR - Total Speed: 3035.708 Mh/s, Total Shares: 10, Rejected: 1
DCR: GPU0 410.116 Mh/s, GPU1 520.818 Mh/s, GPU2 523.234 Mh/s, GPU3 509.493 Mh/s, GPU4 547.123 Mh/s, GPU5 524.924 Mh/s

GPU #5: Ellesmere, 4059 MB available, 32 compute units
ETH - Total Speed: 124.192 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05
ETH: GPU0 21.167 Mh/s, GPU1 21.082 Mh/s, GPU2 26.355 Mh/s, GPU3 18.679 Mh/s, GPU4 18.862 Mh/s, GPU5 18.048 Mh/s
DCR - Total Speed: 2483.846 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1)
DCR: GPU0 423.342 Mh/s, GPU1 421.635 Mh/s, GPU2 527.094 Mh/s, GPU3 373.574 Mh/s, GPU4 377.243 Mh/s, GPU5 360.958 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 141.107 Mh/s

ETH - Total Speed: 141.310 Mh/s, Total Shares: 33(6+7+4+6+5+5), Rejected: 0(0+0+0+0+0+0), Time: 00:05
ETH: GPU0 21.609 Mh/s, GPU1 25.920 Mh/s, GPU2 26.955 Mh/s, GPU3 18.809 Mh/s, GPU4 27.303 Mh/s, GPU5 20.715 Mh/s
DCR - Total Speed: 2826.191 Mh/s, Total Shares: 10(2+1+2+0+2+3), Rejected: 1(0+0+0+0+0+1)
DCR: GPU0 432.170 Mh/s, GPU1 518.391 Mh/s, GPU2 539.092 Mh/s, GPU3 376.174 Mh/s, GPU4 546.055 Mh/s, GPU5 414.309 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 141.097 Mh/s

Using a custom/modded bios? Which one? You're most likely hitting the power limit/voltage limit.

Anyways for the current BIOS you need to decrease the -dcri parameter in claymore config.txt or command line argument. You may use + or - on keyboard numpad to determine the best value for -dcri on the fly while mining to determine the best 2nd coin mining hashrate without impacting on Eth hashrate. Good luck

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: Barbar User on September 07, 2017, 02:20:09 AM

Hi;

I have 6pcs MSI RX570 4GB GAMING X (Elpida) and mining ETH+DCR. Stock, I got 23.5 and with OC I have 24.5. After trying all kind of possible MODS

1:1500 strap to 1:2000 only
1:1750 strap to 1:2000 only
2:1500 strap to 2:2000 only
2:1750 strap to 2:2000 only
1:1500 strap to 1:2000 and 2:1500 strap to 2:2000
1:1750 strap to 1:2000 and 2:1750 strap to 2:2000

Best result I can get 26.2 stable with 1180 - 1990 OC setting.

Simple Mining OS
Asrock BTC + PRO
i3 6100
8GB DDR4
2X 750Watt PSU

I see in many forums people go for 1100-2040 however as soon as I get close to 2000 with memory speed cards are not stable anymore nad 2000 and over they stop working.

Also tried Sapphire Nitro RX580 8GB and It seems ok with going over 2000 memory clock. Tried 1280-2199 I got 28MHS +750 for DCR

What do you think is the problem is?

Not all cards do above 2000 stable (with 1500 strap mods). I have couple of MSI RX 570 Gaming X that do 1900-1950. Higher than that they give out memory errors. I have an MSI RX 570 armor OC that does 2040. However, the ones that do 1900-1950 also hash at 27.5-28 Mh/s. None of my cards are below 27 Mh/s even at 1900 Mhz memory frequency.

Also in my experience 1040/1075 Mhz on core and 1900/1950 Mhz works fine for most of the rx 570 gaming x cards I have. I get very less hash-rate improvements over 1140 MHz while keeping the memory frequencies below 2000 Mhz without increasing the power consumption considerably. So it wasn't worthwhile.

This is for solo mining. For dual mining the core frequency helps but also increases the power consumption so have to tweak those too. Right now mine are set at TDP 100 and Max power of 120 with core/mem voltages lowered too.

Quote from: hardworker27 on October 05, 2017, 11:37:48 PM

Hi, this is my case https://imgur.com/a/I1KnI (ethos)
I got 6 Rx 570 4gb Sapphire Nitro+. 1 of them is Hynix, the rest are Elpidia. I'm dual mining: ETH + SIA. For SIA I'm getting 469 each.
I'm wondering. My last gpu (hynix) is somehow undervolted as you can see. I have no idea how because I forgot the original BIOS file. It is much cooler than the other cards. I'm happy with the hashrate less than 1 from the others.
My questions are: is it safe to get it undervolted? If yes, how can I do to the others?
Please check my mem and cor also and please let me know if you see something wrong. I would like to say that I'm using 2 table fans to help it get cool. Please advice me methods to keep it cool and downgrade the hashrate if necessary.
Thank you very much.

Under volting is safe and helps to reduce power consumption. You might run into stability issues if you have undervolted a lot. That said undervolting shouldn't reduce your hashrate. It might be that you've that particular card running in a lower clocked state. there are 8 clock states or so iirc for amd gpu's

dragonmike

hero member

Activity: 1274

Merit: 556

I'm not sure what you're trying to say... If you undervolt your GPU you're surely LESS likely to burn it... Then it's just about finding the right mix of lowest timings and highest clocks that will maximise your hashrate... You're only really putting extra strain on your hardware if you give it more juice. I've never seen a GPU fail from undervolting (or pure overclocking for that matter).

akirasendo7

newbie

Activity: 58

Merit: 0

Quote from: Mattthev on October 09, 2017, 02:17:52 AM

Quote from: akirasendo7 on October 08, 2017, 08:20:56 PM

as for 470 570 and 580

470 and 480 produce better hashrate than 570
but it will all rely much on the memory and manufacturer
if its sapphire 470 it will take u to 28-29 respectively
570 sapphire not that much as for my own experience
580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\
for modding you can email me or contact me i can help you,

What? RX 580 Hynix can do 32MH/s, well not every card, but 30MH/s with almost all of them, I would say Wolf0 can push it even more. RX 470/570 29-30MH/s is almost no problem. Depends on exact Hynix memory type and quality.

Have you not read my statement? it depends,
and yes you can push cards but its not recommended you just letting the device burn
you dont push equipment to the limits, its already given to much is bad, also electricty will drag you
next time ready carefully

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: akirasendo7 on October 08, 2017, 08:20:56 PM

as for 470 570 and 580

470 and 480 produce better hashrate than 570
but it will all rely much on the memory and manufacturer
if its sapphire 470 it will take u to 28-29 respectively
570 sapphire not that much as for my own experience
580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\
for modding you can email me or contact me i can help you,

What? RX 580 Hynix can do 32MH/s, well not every card, but 30MH/s with almost all of them, I would say Wolf0 can push it even more. RX 470/570 29-30MH/s is almost no problem. Depends on exact Hynix memory type and quality.

akirasendo7

newbie

Activity: 58

Merit: 0

as for 470 570 and 580

470 and 480 produce better hashrate than 570
but it will all rely much on the memory and manufacturer
if its sapphire 470 it will take u to 28-29 respectively
570 sapphire not that much as for my own experience
580 will rely much on memory but hynix can be push to 29mhz without shutting down and stable\
for modding you can email me or contact me i can help you,

hardworker27

newbie

Activity: 58

Merit: 0

Hi, this is my case https://imgur.com/a/I1KnI (ethos)
I got 6 Rx 570 4gb Sapphire Nitro+. 1 of them is Hynix, the rest are Elpidia. I'm dual mining: ETH + SIA. For SIA I'm getting 469 each.
I'm wondering. My last gpu (hynix) is somehow undervolted as you can see. I have no idea how because I forgot the original BIOS file. It is much cooler than the other cards. I'm happy with the hashrate less than 1 from the others.
My questions are: is it safe to get it undervolted? If yes, how can I do to the others?
Please check my mem and cor also and please let me know if you see something wrong. I would like to say that I'm using 2 table fans to help it get cool. Please advice me methods to keep it cool and downgrade the hashrate if necessary.
Thank you very much.

SummersideGuy

sr. member

Activity: 518

Merit: 250

I am a meat Popsicle

Quote from: syraka76 on September 22, 2017, 02:24:26 AM

I see that by now it has become a fashion to ask for money, btc, eth, to share a bios with the community, the man and the greedy, poor world

Angry

Just get the Polaris 1.6 fork and save your Eth
https://github.com/jaschaknack/PolarisBiosEditor
It detects your card memory and applies optimal timings for your card, better then just copying straps down from 1500. Also make sure to back up your Rom as always.

syraka76

member

Activity: 83

Merit: 10

I see that by now it has become a fashion to ask for money, btc, eth, to share a bios with the community, the man and the greedy, poor world

Angry

spectune

newbie

Activity: 24

Merit: 0

I get from my Nitro+ 4GB RX570 /Hynix) max 30,5Mh/s out at 120W at the wall. Used the Ubermix 3.1 strap copied from 1650 up. Undervoltage at 860mV both. Clock at 2070mem/1160GPU. That's it.

renaTq

newbie

Activity: 18

Merit: 0

Hello.

I have RX 570 4GB Sapphire Nitro+ with Elpida and I got it to 30.2mh/s with total of 118w power draw. If you are interested in bios or overclock you can contact me on via private messages and we can work out something. Don't mind other card,that is GTX 1060 6GB.

https://pixxxels.org/image/ga8e5rslh/

HastyQuynh

newbie

Activity: 38

Merit: 0

We appreciate all new Redditors on /r/EtherMining and want to ensure you have the best resources available to you.
Since your account is fairly new, we'd like to remind you about our subreddit's Wiki Guide to Mining. Please take a look through this guide for answers to common questions.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

tf2addict

full member

Activity: 675

Merit: 100

Quote from: peyo on September 08, 2017, 10:22:25 AM

Same here and i'm on simpleMining OS too with 25.8 MH/s per cards.

What bios setting did you use finally ?

Maybe we can't get more now, with the new DAG file gettings bigger and bigger

The new AMD blockchain driver solves the DAG file growth problem.

peyo

newbie

Activity: 7

Merit: 0

Same here and i'm on simpleMining OS too with 25.8 MH/s per cards.

What bios setting did you use finally ?

Maybe we can't get more now, with the new DAG file gettings bigger and bigger

Barbar User

newbie

Activity: 2

Merit: 0

Hi;

I have 6pcs MSI RX570 4GB GAMING X (Elpida) and mining ETH+DCR. Stock, I got 23.5 and with OC I have 24.5. After trying all kind of possible MODS

1:1500 strap to 1:2000 only
1:1750 strap to 1:2000 only
2:1500 strap to 2:2000 only
2:1750 strap to 2:2000 only
1:1500 strap to 1:2000 and 2:1500 strap to 2:2000
1:1750 strap to 1:2000 and 2:1750 strap to 2:2000

Best result I can get 26.2 stable with 1180 - 1990 OC setting.

Simple Mining OS
Asrock BTC + PRO
i3 6100
8GB DDR4
2X 750Watt PSU

I see in many forums people go for 1100-2040 however as soon as I get close to 2000 with memory speed cards are not stable anymore nad 2000 and over they stop working.

Also tried Sapphire Nitro RX580 8GB and It seems ok with going over 2000 memory clock. Tried 1280-2199 I got 28MHS +750 for DCR

What do you think is the problem is?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: SeriousSnake on September 04, 2017, 07:30:17 AM

Hi everyone, newbie here, i really need some help

GPU: MSI RX570 Gaming X 4GB, Hynix vram

Using official AMD blockchain aug 23 drivers
MSI afterburner beta 15
BIOS Modded, copied 2:1500 strap to above, did not change 1:xxxx straps

I could get 24.9 mh/s for ETH after BIOS MOD
however I could not get to 28mh/s or above Huh

I tried overclocking in MSI AB, increased the memory clock from 1750mhz to 2000mhz, but the hashing rate actually dropped from 25mh/s to 24.8mh/s Huh

any help is greatly appreciated!!

With this kind of bios mod you won't be able to increase hashrate much. You need custom performance timing. You can search some of them.
I've post where to find performance timing for Samsung:
https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245

SeriousSnake

newbie

Activity: 17

Merit: 0

Hi everyone, newbie here, i really need some help

GPU: MSI RX570 Gaming X 4GB, Hynix vram

Using official AMD blockchain aug 23 drivers
MSI afterburner beta 15
BIOS Modded, copied 2:1500 strap to above, did not change 1:xxxx straps

I could get 24.9 mh/s for ETH after BIOS MOD
however I could not get to 28mh/s or above Huh

I tried overclocking in MSI AB, increased the memory clock from 1750mhz to 2000mhz, but the hashing rate actually dropped from 25mh/s to 24.8mh/s Huh

any help is greatly appreciated!!

Snow_Dog

newbie

Activity: 14

Merit: 0

Quote from: ?? on ??

Quote from: Snow_Dog on August 26, 2017, 09:23:46 AM

Quote from: Snow_Dog on August 26, 2017, 08:14:44 AM

Quote from: Mattthev on August 26, 2017, 08:04:53 AM

Quote from: Snow_Dog on August 26, 2017, 08:01:13 AM

I have a Sapphire 570 Pulse with 4 GB Hynix memory running the latest AMD driver and the memory strap mod and get 27 Mh/s (core clock and 2000 memory NO undervolting (electricity is included in my rent

)). Has anyone tried this card with the new AMD "mining" driver? If so did you compare the stock memory timings with moded ones?

It can do 30.

30 wow, ok I will have to spend some time playing with it. I just noticed I am running Claymore V9.6 so will change to a newer version. Not sure if that will make a difference or not.

Just upgraded Claymore from v9.6 to v9.8 using exactly the same vanilla bat file and it's about the same hash rate (actually 26.8-26.9 but there might be some default settings for things like intensity that may need to changed).

Needs better timings, is what he means.

Using the Polaris BIOS editor I copied the 1500Mhz timing value to all the higher timings (there are timings "one" and timings "two" settings and the hex timing value is different for each so I used the different 1500 setting for each. Is that right or should I use the same one for both? Could I try using the 1425 or even 1375 Mhz timings or is that pushing it too far?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: ?? on ??

Can do more than that!

With your magic Cheesy

I can do it max around 31, but with bad power consumption. 30MH/s with good undervolting. 32+ with power saving I can do only with 8GB Hynix.

Topic: Hashrate RX 570 - page 10. (Read 204245 times)