Hiveon. №1 OS for mining - page 12.

dimafern

member

Activity: 577

Merit: 27

0.6-210@210910 🐧

What's new?

MINERS👷‍♂️
⛏ NanoMiner v3.3.9 (performance improvements on KawPoW for Nvidia Pascal, Turing and Ampere GPUs; improved connection stability for China users; new option fanSpeed: used to set the GPU fan speed to a specific percentage from 30% to 100%, if below 30, automatically sets to 30)
⛏ Gminer v2.67 BETA (partial LHR cards unlock without additional power consumption; use --lhr 1 to force enable unlock for RTX 3060 V1; use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock; Note: added for testing purposes - need select version manually in miner settings while latest version is still v2.66)

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: dimafern on September 09, 2021, 09:42:22 AM

0.6-210@210909

What's new?

SYSTEM 🖥
⚙️ Improved Nvidia OC (improved support for fanless and mobile GPUs; updated nvtool to v1.5.5)
⚙️ Added support for AMD RX 6900 XT Ultimate (added definitions for AMD RX 6900 XTX/W6900X/RX 6700M/RX 6600M; added OC support for RX 6900 XTX known as RX 6900 XT Ultimate; fixed displaying name for RX 6700 XT with ASIC NAVI22 XTLH)
⚙️ Improved update process (added GPUs re-detection after update; added attempt to fix broken packages)
⚙️ Improved stratum latency checker ( more accurate data)
⚙️ Fixed autofan (fixed critical temp action)
⚙️ Fixed flashing NVidia GPUs in force mode

I updated this version, and I no longer have the worry of losing hashrate, I stay at 61.40mh instead of 61.08Mh

Kiss

on the other hand it would be good to add the possibility in "autofan" to put a percentage per fan

Because I put 55 but I have a 3080 which it must run at 65% but I don't want the manual mode (autofan OFF)
if we can put for example:

0:55 1:65 2:55
0 or 1 or 2 = id gpu
55 or 65% = fan %% for speed

but also to make tasks plan for example between 11 p.m. in the evening and 5 a.m. the fans turn at 55% then from 5 a.m. to 11 p.m. at 65%
it is hotter during the day than at night and running more is useless

I am at 45% in autofan and at 8 am I will manually set 55%

dimafern

member

Activity: 577

Merit: 27

0.6-210@210909

What's new?

SYSTEM 🖥
⚙️ Improved Nvidia OC (improved support for fanless and mobile GPUs; updated nvtool to v1.5.5)
⚙️ Added support for AMD RX 6900 XT Ultimate (added definitions for AMD RX 6900 XTX/W6900X/RX 6700M/RX 6600M; added OC support for RX 6900 XTX known as RX 6900 XT Ultimate; fixed displaying name for RX 6700 XT with ASIC NAVI22 XTLH)
⚙️ Improved update process (added GPUs re-detection after update; added attempt to fix broken packages)
⚙️ Improved stratum latency checker ( more accurate data)
⚙️ Fixed autofan (fixed critical temp action)
⚙️ Fixed flashing NVidia GPUs in force mode

dimafern

member

Activity: 577

Merit: 27

0.6-209@210906 🐧

What's new?

MINERS👷‍♂️
⛏ TeamRedMiner v0.8.5 (added mem temp limits, see options --mem_temp_limit and --mem_temp_resume; added support for forcing ethash pool hashrate reports, see --eth_hash_report; fixed hashrate reports for ethash Crazypool when using failover pools; added extranonce subscription support to autolykos2 algorithm for e.g. Nicehash)
⛏ XMRig-mo v6.15.0 (MoneroOcean pool fork synced to upstream version)
🐞 Fixed stats for some miners (fixed incorrect displaying invalid/rejected shares for Gminer and T-Rex; fixed incorrect displaying CPU threads on Nanominer)

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

I have some questions.

What speeds do i achieve whit a RTX 3080 10GB LHR and what coin will i get most MHS and revenue whit? thanks

dimafern

member

Activity: 577

Merit: 27

0.6-209@210831 🐧

What's new?

MINERS👷‍♂️
⛏ NBMiner v39.2 (added LHR lock detection on ethash and recovery in LHR mode; more robust protocol handle for ERGO mining)
⛏ XMRig v6.15.0 (added new algorithm rx/graft RandomX Graft; added AVX2 Salsa20 implementation for AstroBWT)

dimafern

member

Activity: 577

Merit: 27

0.6-209@210826 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.66 (improved KawPoW algorithm performance on Nvidia GPUs; added AMD implementation for KawPoW; improved compatibility with Ethash pools)
⛏ SRBMiner-Multi v0.8.0 (added algorithm randomgrft for CPU mining GRFT/Graft coin with devfee 0.85%; performance increase on ethash, etchash, ubqhash, verthash, heavyhash algorithms for RX6800/6900 GPUs; performance increase on autolykos2 algorithm on ZEN2+ AMD CPU's up to ~90%; fixed cryptonight_gpu and cryptonight_xhv algorithm for RDNA/RDNA2 GPUs; added GPU power consumption details to stats & API; minor bug fixes)
⛏ XMRigCC v2.9.6 (added rx variant rx/graft for mining GRFT/Graft coin)

dimafern

member

Activity: 577

Merit: 27

0.6-209@210822 🐧

What's new?

MINERS👷‍♂️
⛏ NBMiner v39.1 (improved ethash hashrate of LHR mode 1-2%, default value of lhr mode changed from 68 to 69，manually set to 70 is also very promising; fixed kawpow issue appeared in v39.0)

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: CrossroadBTC on August 20, 2021, 11:31:06 AM

Quote from: dedizonesv2 on August 20, 2021, 02:05:46 AM

Quote from: dimafern on August 18, 2021, 10:08:01 PM

0.6-209@210819 🐧

What's new?

SYSTEM 🖥
⚙️ Small fix in OC AMD GPUs (fixed memory clock setting for "Navi23" RX 6600 series >1075MHz)

MINERS👷‍♂️
⛏ Gminer v2.65 (fixed floating hashrate reporting, appeared in v2.64)

Please fix bug hashrate and OC nvidia with last update

RTX 3080: 99.87MH to 99.27Mh
RTX 3070: 60.80MH to 60.13Mh
Rtx 3060Ti: same problem

You are indeed an observant, I lost few hashrates on RTX 3060ti as well after updating to the latest version of hive OS, I had to increase OC again to get to where I was before this latest update

I also had to increase my OC but suddenly we consume more, the heat cards unnecessarily.

I updated to 100% hiveos and linux *, then I went back to the version: 0.6-206@210819 aka 0.6-206@**** and more worries.

* speaking of updating, it would be cool to do your ISOs with the security updates included ... as well as the nvidia settings which are not up to date.

for those who want to do because hiveos is not n °1 in communication between minors and dev staff.

to update, either via SSH or hive-shell

Code:

sudo apt-get update -y && sudo apt-get dist-upgrade -yuf

Code:

sudo apt-get install nvidia-settings xserver-xorg-core

and press Y for yes

so update hiveos and linux via hive-shell then rollback to the version 0.6-206@****

Good luck:

CrossroadBTC

member

Activity: 182

Merit: 14

Quote from: dedizonesv2 on August 20, 2021, 02:05:46 AM

Quote from: dimafern on August 18, 2021, 10:08:01 PM

0.6-209@210819 🐧

What's new?

SYSTEM 🖥
⚙️ Small fix in OC AMD GPUs (fixed memory clock setting for "Navi23" RX 6600 series >1075MHz)

MINERS👷‍♂️
⛏ Gminer v2.65 (fixed floating hashrate reporting, appeared in v2.64)

Please fix bug hashrate and OC nvidia with last update

RTX 3080: 99.87MH to 99.27Mh
RTX 3070: 60.80MH to 60.13Mh
Rtx 3060Ti: same problem

You are indeed an observant, I lost few hashrates on RTX 3060ti as well after updating to the latest version of hive OS, I had to increase OC again to get to where I was before this latest update

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: dimafern on August 18, 2021, 10:08:01 PM

0.6-209@210819 🐧

What's new?

SYSTEM 🖥
⚙️ Small fix in OC AMD GPUs (fixed memory clock setting for "Navi23" RX 6600 series >1075MHz)

MINERS👷‍♂️
⛏ Gminer v2.65 (fixed floating hashrate reporting, appeared in v2.64)

Please fix bug hashrate and OC nvidia with last update

RTX 3080: 99.87MH to 99.27Mh
RTX 3070: 60.80MH to 60.13Mh
Rtx 3060Ti: same problem

dimafern

member

Activity: 577

Merit: 27

0.6-209@210819 🐧

What's new?

SYSTEM 🖥
⚙️ Small fix in OC AMD GPUs (fixed memory clock setting for "Navi23" RX 6600 series >1075MHz)

MINERS👷‍♂️
⛏ Gminer v2.65 (fixed floating hashrate reporting, appeared in v2.64)

dimafern

member

Activity: 577

Merit: 27

New Stable Image 0.6-208@210818 💿

🔑 Key features:
* Universal boot mode: BIOS | UEFI
* Hive Linux client: v0.6-208@210818
* Ubuntu v18.04 LTS based
* Linux kernel: v5.4.140
* Nvidia drivers: v460.91.03
* AMD OpenCL v20.40
* AMD kernel driver v5.11.0701 with supporting the latest GPUs including AMD RX 6600 series

This Image is recommended for Nvidia Pascal/Turing/Ampere and AMD Polaris/Vega/Navi/Big Navi

💾 Available for download as a torrent or xz archive in the "GPU" section: https://download.hiveos.farm/latest/ and flashed with Rufus/balenaEtcher or it can be live replaced with the hive-replace tool via shell [ hive-replace -y --stable ]

🍰 For enthusiasts, there is also a Beta image on the modern Linux kernel v5.10 and latest drivers available on the site. All other characteristics are the same as Stable Image

dimafern

member

Activity: 577

Merit: 27

0.6-208@210818 🐧

What's new?

SYSTEM 🖥
⚙️ Fixed agent (in some cases overall rig stats was broken)
⚙️ Improvements and fixes for AMD GPUs overclocking (fixed OC for Tonga families GPUs, ex. FirePro S7150; added support* OC/UV for "Navi23" - RX 6600 series)

*AMD RX 6600 series GPUs currently requires a Beta image to run. During August 18 support will appear in a Stable image too. Stay tuned!

Looper_U

member

Activity: 369

Merit: 16

$CYBERCASH METAVERSE

Quote from: HaloGenius on August 10, 2021, 03:02:42 PM

Quote from: Squezzi55 on August 10, 2021, 09:31:35 AM

Hi hive OS you guys have abandoned miners with LHR graphic cards since only driver 471 can detect LHR GPUs like RTX 3070 and 3070ti and there is no way to update Nvidia drivers to the lastest version in hive OS, I was forced to use Windows because of this, please try fixing this

1) Latest stable driver is 460.91.03 (for morning of August 10, 2021 it's really latest Nvidia driver and newer than 470.57.02) that support all latest Nvidia GPUs
it's can be install by
nvidia-driver-update --stable
or
nvidia-driver-update -s
or
nvidia-driver-update 460
or
nvidia-driver-update 460.91.03

2) you can also install any version including not listed
nvidia-driver-update https://download.nvidia.com/XFree86/Linux-x86_64/470.57.02/NVIDIA-Linux-x86_64-470.57.02.run
or even
nvidia-driver-update 470.57.02

IMHO buying GPUs with LHR v2 it's not very good idea - you pay as the Lambo but use it as bike

Feels like this is pointing to me 🤦 but honestly the card (rtx3070ti) is good for ergo (162MH) and Ravencoin (35-36MH) and also thanks to NBminer 39.0 I can achieve 52MH with ease now, LHR won't matter in future

HardCore12V

member

Activity: 223

Merit: 13

Quote from: dimafern on August 16, 2021, 12:07:45 AM

0.6-207@210815 🐧

What's new?

MINERS👷‍♂️
⛏ NBMiner v39.0 (implemented LHR mode for ETH mining on RTX 30 series LHR GPUs, able to get ~70% of maximum unlocked hashrate. Notes about LHR mode: "lhr": "value" or "lhr": "value0,value1,...,valueN" for GPU0, GPU1,...,GPUN respectively where value can be set from -1 to 100: -1 means turn off LHR mode, 0 it's default and means auto LHR mode with value 68 will be applied to LHR GPUs if certain GPUs are detected)
⛏ XMRig v6.14.1 (code refactoring and bug fixes)

Are you saying that LHR GPU like 3070ti works now? I can't get mine to work since 3070ti requires Nvidia driver 471, how do I go about this admin? Or just make the driver available in hive OS

dimafern

member

Activity: 577

Merit: 27

0.6-207@210815 🐧

What's new?

MINERS👷‍♂️
⛏ NBMiner v39.0 (implemented LHR mode for ETH mining on RTX 30 series LHR GPUs, able to get ~70% of maximum unlocked hashrate. Notes about LHR mode: "lhr": "value" or "lhr": "value0,value1,...,valueN" for GPU0, GPU1,...,GPUN respectively where value can be set from -1 to 100: -1 means turn off LHR mode, 0 it's default and means auto LHR mode with value 68 will be applied to LHR GPUs if certain GPUs are detected)
⛏ XMRig v6.14.1 (code refactoring and bug fixes)

dimafern

member

Activity: 577

Merit: 27

0.6-207@210812 🐧

What's new?

MINERS👷‍♂️
⛏ NanoMiner v3.3.8 (fixed KawPoW for some users; fixed incorrect shares on some XMR jobs due to wrong blob length)

HaloGenius

jr. member

Activity: 251

Merit: 4

Quote from: dedizonesv2 on August 11, 2021, 01:19:24 PM

i think "Fixed Nvidia OC " it's no fixed !

doesn't matter what you think, really because in brackets it is written that under this implies. Just read carefully

dedizonesv2

jr. member

Activity: 152

Merit: 3

Quote from: dimafern on August 09, 2021, 12:55:08 AM

0.6-207@210808 🐧

What's new?

SYSTEM 🖥
⚙️ Updated nvtool to v1.5.4 (fixed memory detection for some GPU)
⚙️ Updated PCI IDs definitions to v2021-07-30 (added Nvidia CMP 170HX)
⚙️ Updated amdmeminfo to v2.1.10 (added FirePro S7150; minor fixes)
🐞 Fixed Nvidia OC (improved support for fanless GPUs)
🐞 Fixed AMD OC (improved hashrate stability for some RX 6x00 GPUs)
🐞 Fixed octofan (fix for fanless GPUs)

i have problem with OC nvidia: 3070 lock to 59.80MH, i rollback to 0.6-206@210807: 60.50MH

what is problem ? i tested other driver nvidia same problem, tested beta same problem

i think "Fixed Nvidia OC " it's no fixed !

Topic: Hiveon. №1 OS for mining - page 12. (Read 80796 times)