Topic: Hiveon. №1 OS for mining - page 10. (Read 80840 times)

0.6-210@211020 🐧

What's new?

MINERS 👷‍♂️
⛏ BzMiner v4.5
* improved hashrate on some AMD cards, specifically 4Gb cards;
* bug fixes: auto protocol detection fixed, corrected hashrate output
⛏ CPUminer-Opt-JayDDee v3.18.2
* minor fixes
⛏ XMRig-MO v6.15.2-mo2
* added "algo-min-time" option

0.6-210@211018-2 🐧

What's new?

MINERS 👷‍♂️
⛏ PhoenixMiner v5.8b
* implemented optimized kernels for AMD RX6600XT cards
* added support for the latest AMD Linux drivers
* kernels for AMD Polaris changed to support latest drivers: it's very small speed improvement < 0.1% on average
* other fixes and small improvements
⚙️ miniZ: split v1.8y4 to v1.8y4rc1 and v1.8y4rc2

0.6-210@211018 🐧

What's new?

MINERS 👷‍♂️
⛏TeamRedMiner v0.8.6.2
* added a synthetic algo mtp_firopow that will use the correct algo given the system time and shut down the miner at the time of the Firo fork on Oct 26, 2021;
* split the ethash and progpow algos into separate binaries, mainly for some Vegas that ran into stability issues going from 0.8.5 to 0.8.6;
* added support autolykos2 for Tonga GPUs;
* changed the default SSL behavior to not provide a SNI hostname during handshake: this simplifies running tunnels against TLS/SSL ports on public pools
⛏lolMiner v1.34
* rework of LHR semi-unlocker: improved performance of RTX 3060 and RTX 3060 Ti by up to 2%, generally allowing a bit less core clock; auto tuning will now be quicker to reasonable hashrates; improved stability on found parameters;
* added support of RTX A6000 / RTX A5000 / RTX A4000 (and future RTX A2000) Nvidia workstation GPUs;
* reduced RAM usage of Nvidia Ethash solver;
* other improvements and minor bug fixes: see full miner's changelog
⛏SRBMiner-Multi v0.8.1
* added algorithms: firopow, kawpow, progpow variants for mining EPIC/SERO/VEIL/VBK for CPU/GPU mining, fee 0.85%,
* added algorithms: astrobwt, minotaurx for CPU mining, fee 0.85%;
* lowered devfee for lyra2v2_webchain algorithm to 0.85%;
* small improvements on 'autolykos2' algorithm for RX550 & RX560 GPU's;
* added shares statistics per GPU;
* other improvements and minor bug fixes: see full miner's changelog
⛏NanoMiner v3.3.14
* update to fulfill Nicehash requirements

0.6-210@211017 🐧

What's new?

MINERS 👷‍♂️
⛏ BzMiner v4.4.1
* fixes low hashrates and high stales on some cards.
* overall improvements to poolside hashrate.
* auto intensity feature ( "intensity": 0).
* pool average latency added to /status API.
* warnings when mining to dev pool and API status hashrate set to zero to make it more obvious something is wrong.
* added /hive_status HTTP endpoint
Notes: removed all previous versions from repository
⛏ miniZ v1.8y4-rc2
* added support for RTX 3070 Ti and 3080 Ti LHR GPUs, on ethash.
* improved performance for mining locked LHR GPUs while mining ETH.
* improved --tune option for better GPU tuning, see FAQ;
* small improvements for 3060 on Equihash 144/5
⛏ CPUminer-Opt-JayDDee v3.18.1
* additional scrypt algo optimizations
Notes: removed all versions prior to v3.15.7 from repository
⛏ CPUminer-Opt-GR v1.2.2
* improved performance on ghostrider algo.
Notes: removed all versions prior to v1.1.9 from repository
⛏ SGminer-fancyIX v0.7.6
* improved lyra performance on Navi cards, thus better phi2, lyra2Z, allium.
Notes: removed all versions prior to v0.7.5 from repository

Hello! Thank you for your feedback.

We have a lot of messages and a lot of clients. We have reached the upper limit of the rate limit for the TG itself. We are working on it and trying to fix it.

I use hiveOS in 5 different places. 39 rigs. I like HiveOS.
HiveOS Telegram Bot sends the notifications so late. Please fix it or make new notification system for HiveOS IOS APP.
This problem happens for one year.

HiveOS shows the rigs offline online randomly for a week.
There is no internet connection problem. Many of my friends have this problem too.
Only for a week. Please check it.

Hi all guys!

We are welcome you to join Hiveon official subreddit: https://www.reddit.com/r/Hiveon_Official/ 👋

The biggest crypto mining eco-system 🌎

Keep up to date with news, updates, new products and get relevant support from our mining community. 👷‍♂️

Join: https://www.reddit.com/r/Hiveon_Official/

0.6-210@211010 🐧

What's new?

MINERS 👷‍♂️
⛏ T-Rex v0.24.2
* enabled LHR unlock functionality for autolykos2 algo
* added LHR unlock "auto-tune" functionality for ethash and autolykos2 algo, see option lhr-autotune-mode for details
* added ETH+ZIL mining mode with an arbitrary ETH pool
* fixed hashrate degradation on kawpow in version 0.24.0 on some configurations
⛏ BzMiner v4.2
* stabilized hashrate
* fixed issues for AMD cards

I like RaveOS more
It was for me when I was beginner much more easy to setup and start.

But lately it was very buggy so I would maybe pick Hive

0.6-210@211007 🐝

What's new?

MINERS 👷‍♂️
⛏ T-Rex v0.24.0
* introduced new LHR unlock dual mining mode.
you can now mine ETH (~30% of full speed) and other coins (~70%) simultaneously with LHR cards using their full potential.
Available combinations along with memory requirements:
    * ETH+ERGO / ETH+RVN (8GB+)
    * ETH+CFX (10GB+)
    see https://github.com/trexminer/T-Rex/wiki/LHR on how to set it up.
* automatically detect LHR cards even if "lhr-tune" is not specified.
* new parameter "lhr-low-power": true reduces power consumption in LHR mode at a cost of a slightly lower hashrate (start from "lhr-tune": "68")
⛏ TeamRedMiner v0.8.6
* added firopow algo for Firo's upcoming hardfork on Oct 26, 2021.
* slight hashrate improvements on kawpow/firopow.
see new option --prog_micro_tune.
* autolykos2: added high score support and display of submitted share difficulty
⛏ NanoMiner v3.3.13
* significantly improved autolykos2 performance (~10%) on Nvidia Turing GPUs (RTX 16xx, RTX 20xx, CMP 30HX).
* reduced autolykos2 power consumption on Nvidia GPUs.
⛏ 🎉 NEW BzMiner v4.1
* Nvidia/AMD miner with 0.5% devfee. Currently supports ethash and etchash.
⛏ 🎉 NEW FiroMiner v1.0.0
* ethminer fork; official no-fee miner from FIRO coin devs for the upcoming hardfork on Oct 26, 2021.
Notes: due to poor performance on AMD GPUs we strongly advise using TeamRedMiner.
⛏ XMRig v6.15.2
* fixed AstroBWT auto-config ignoring max-threads-hint.
⛏ XMRig-MO v6.15.2
* MoneroOcean pool fork synced with XMRig v6.15.2 code.
⛏ CPUminer-Opt-Rplant v5.0.24
* added minotaurx algo support.

when TeamBlackMiner?

Is there a way to control the PWM connected fans on the motherboard? I have the intake and outtake fans connected to the motherboard. I control them now by bios but i wan't to control them more freely instead rebooting and connecting a monitor and keyboard to the rig.

0.6-210@211002 🐧

What's new?

MINERS👷‍♂️
⛏ Gminer v2.70
* improved auto-tune for LHR GPUs, now miner speedup performance when GPU is steady
* removed --lhr_tune1 / --lhr_tune2 parameters, use --lhr_tune to tune LHR GPUs: value range is -10..10, old parameters ignored for compatibility
* display current --lhr_tune value and current kernel in statistics table
⛏ lolMiner v1.33
* complete rework of LHR semi-unlock feature:
    - better performance of LHR semi-unlock
    - automatically detected LHR GPUs option --mode not needed anymore
    - option --lhrtune has now default value of auto for an automatic tuning;
* other changes and bug fixes, see miner release notes (https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.33) for full details
* recommended driver for LHR v2: 470.74
⛏ CPUminer-Opt-JayDDee v3.18.0
* complete rewrite of Scrypt code:
    - up to 50% increase in hashrate
    - support AVX512 & SHA support for SHA256
* improved stale share handling for all algorithms
* other improvements and bug fixes

When to update gminer2.7&lolminer1.33?

Can I mine ETC with Hive? Thats what a mean on coins...

Thanks for the reply

0.6-210@210928 🐧

What's new?

MINERS👷‍♂️
⛏ T-Rex v0.23.2
* fixed issue with CPU validation incorrectly detects invalid shares after epoch change on octopus algo
* fixed issue caused miner crush sometimes when validate-shares is enabled on autolykos2 algo

Hive supports CPU/GPU mining on rigs with 50+ miners so no limit for coins - if this coin mineable on CPU/GPU than you can mine it in Hive

WHAT COINS ARE AVAILABLE TO MINE IN HIVE?

0.6-210@210925 🐧

What's new?

MINERS👷‍♂️
⛏ T-Rex v0.23.1
   * removed telnet API
   * multiple bug fixes
⛏ GMiner v2.69
   * added auto-tune for LHR GPUs, enabled by default, to disable pass --lhr_autotune 0
   * increased reconnect tries on connection loss --reconnect_count
⛏ NanoMiner v3.3.12
   * added support verthash for AMD GPUs
   * fixed issues on kawpow with Nvidia driver v470.57
   * reduced stale shares on kawpow
   * fixed miner crush when started with some AMD GCN3 and older GPUs
⛏ NBMiner v39.5
   * added ability mining ergo LHR mode for mining ERGO, enable it by manually adding lhr option
       - same as LHR mode in ethash, lhr value represents expected hashrate to reach value percent of non-LHR GPU's hashrate, supports comma-seperated list to indicate lhr value for each GPU, and "lhr": "-1" to disable.
       - for GPUs with Hynix GDDR6 memory, LHR mode is not recommended for the poor performance.
       - for GPUs with non-Hynix GDDR6 memory, e.g. 3060 3060ti 3070, start trying with "lhr": "85"
       - for GPUs with GDDR6X memory, e.g. 3070ti 3080 3080ti, start trying with "lhr": "100"
       - when mining lock is detected during ERGO mining, miner will automatically decrease lhr value by 0.5, and continue mining. max decrease times is 10, which sums to 5.0
* optimized power consumption on Nvidia GPUs while mining ERGO
⛏ XMRig v6.15.1
   * minor fixes

+1 HaloGenius


or just for old version HiveOS system use in terminal "ssh" or in hiveos "run command" and past:



DON'T STOP / OFF / SHUTDOWN WORKER OR RIG reboot will be done automatically after upgrade


After automatically reboot check version and upgrade hiveOS last test version

For me is: 0.6-210@

Select: force update and reboot

after again reboot automatically after upgrade

use in terminal "ssh" or in hiveos "run command" and past:


juste waiting 10/15 min...take coffe or chocolate

after wait 15 min...


And wait 2min and finish...ok => STOP RIG... waiting 1min...START RIG (don't use reboot is bad for for first detection hardware after upgrade...

Good luck for solo block and happy mining