Hive OS & miners recent updates
0.6-213@211221 🐝
MINERS 👷♂️
⛏ TeamBlackMiner v1.35
* improved LHR unlock
* default build for CUDA 11.4 and manually can be selected CUDA 11.5 build
0.6-213@211220 🐝
MINERS 👷♂️
⛏ NanoMiner v3.5.2
* fixed issue: could not make binaries for gfx103x (AMD RX 6xxx series GPUs) on 2020 drivers (20.40 and similar).
* fixed crashes and restarts on Nvidia 10xx series and 20xx series (fixed in v3.5.1).
Topic: Hiveon. №1 OS for mining - page 8. (Read 80840 times)
0.6-212@211211 🐧
What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.8.7
* added offline benchmark mode for almost all algos, see --benchmark;
* improved situations with the "Dev pool failed to connect." error message appearing;
* users in China should preferably run with --dev_location=cn;
* added experimental support for DNS-over-HTTPS, see --dns_https and --dns_https_sni
⛏ T-Rex v0.24.8
* added DNS-over-HTTPS support when resolving mining pool domain names, see dns-https-server for details;
* added an option not to set mining pool domain name in SNI header for SSL connections, see no-sni;
* resolve domain names through SOCKS5 proxy if proxy is set;
* display mining pool IP address in console; bug fixes
⛏ TeamBlackMiner v1.32
* fixed CPU validation error on ethproxy pools that caused rejects/skipping valid work;
* added LHR detector and reset the device if detected, removed behavior which reset GPUs every hour which was in v1.30-v1.31;
* removed some LHR code for non LHR cards;
* CUDA devices that are busy/unavailable will be skipped instead of program exit;
* reduced the use of stack, also reduced the overall memory needed;
* removed memleak in --list-devices and --version
What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.8.7
* added offline benchmark mode for almost all algos, see --benchmark;
* improved situations with the "Dev pool failed to connect." error message appearing;
* users in China should preferably run with --dev_location=cn;
* added experimental support for DNS-over-HTTPS, see --dns_https and --dns_https_sni
⛏ T-Rex v0.24.8
* added DNS-over-HTTPS support when resolving mining pool domain names, see dns-https-server for details;
* added an option not to set mining pool domain name in SNI header for SSL connections, see no-sni;
* resolve domain names through SOCKS5 proxy if proxy is set;
* display mining pool IP address in console; bug fixes
⛏ TeamBlackMiner v1.32
* fixed CPU validation error on ethproxy pools that caused rejects/skipping valid work;
* added LHR detector and reset the device if detected, removed behavior which reset GPUs every hour which was in v1.30-v1.31;
* removed some LHR code for non LHR cards;
* CUDA devices that are busy/unavailable will be skipped instead of program exit;
* reduced the use of stack, also reduced the overall memory needed;
* removed memleak in --list-devices and --version
I cannot install in all my rigs CMiner. I follow the Custom Miner guide, I was able in nearly all of them, but I cannot do it. Is it any option to be included as a common miner by HiveOS?.That sure will go then. Many thanks
0.6-212@211211 🐧
What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.8.7
* added offline benchmark mode for almost all algos, see --benchmark;
* improved situations with the "Dev pool failed to connect." error message appearing;
* users in China should preferably run with --dev_location=cn;
* added experimental support for DNS-over-HTTPS, see --dns_https and --dns_https_sni
⛏ T-Rex v0.24.8
* added DNS-over-HTTPS support when resolving mining pool domain names, see dns-https-server for details;
* added an option not to set mining pool domain name in SNI header for SSL connections, see no-sni;
* resolve domain names through SOCKS5 proxy if proxy is set;
* display mining pool IP address in console; bug fixes
⛏ TeamBlackMiner v1.32
* fixed CPU validation error on ethproxy pools that caused rejects/skipping valid work;
* added LHR detector and reset the device if detected, removed behavior which reset GPUs every hour which was in v1.30-v1.31;
* removed some LHR code for non LHR cards;
* CUDA devices that are busy/unavailable will be skipped instead of program exit;
* reduced the use of stack, also reduced the overall memory needed;
* removed memleak in --list-devices and --version
What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.8.7
* added offline benchmark mode for almost all algos, see --benchmark;
* improved situations with the "Dev pool failed to connect." error message appearing;
* users in China should preferably run with --dev_location=cn;
* added experimental support for DNS-over-HTTPS, see --dns_https and --dns_https_sni
⛏ T-Rex v0.24.8
* added DNS-over-HTTPS support when resolving mining pool domain names, see dns-https-server for details;
* added an option not to set mining pool domain name in SNI header for SSL connections, see no-sni;
* resolve domain names through SOCKS5 proxy if proxy is set;
* display mining pool IP address in console; bug fixes
⛏ TeamBlackMiner v1.32
* fixed CPU validation error on ethproxy pools that caused rejects/skipping valid work;
* added LHR detector and reset the device if detected, removed behavior which reset GPUs every hour which was in v1.30-v1.31;
* removed some LHR code for non LHR cards;
* CUDA devices that are busy/unavailable will be skipped instead of program exit;
* reduced the use of stack, also reduced the overall memory needed;
* removed memleak in --list-devices and --version
what this Trex-0.24.7-SSL ? it's same version of T-Rex 0.24.8 with DoH ?
i don"t see here update package https://hiveos.farm/changelog/?type=All&page=1
i don"t see here update package https://hiveos.farm/changelog/?type=All&page=1
0.6-212@211208 🐧
What's new?
MINERS 👷♂️
⛏ GMiner v2.74
* improved stability for LHR mining
* improved LHR auto-tune
* now --proxy option using for user and dev fee connections
* added option to disable non ssl dev fee connections, using --dev_fee_ssl 0
* contest with prizes: 25 x 0.2 ETH, read rules at https://github.com/develsoftware/GMinerRelease/releases/tag/2.74
0.6-212@211207 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.31
* fixed bug in stratum code for Nicehash and the Hiveon pool, possibly affects to other pools as well;
* added support for NVIDIA compute 6.0, 7.0, 8.0 cards GV100, V100, GA100;
* fixed XINT,KERN, hashrate and hashrate/w in the stats when running with a selection of GPUs in the rig
⛏ NanoMiner v3.4.6
* significantly improved mining FIRO/firopow zombie mode on 4Gb AMD GPUs;
* fixed mining VerusCoin/verushash mining
⛏ BzMiner v5.0 Beta4
* added support kawpow algo;
* bux fixes
* version added for testing and review only, the latest version is still v4.7
What's new?
MINERS 👷♂️
⛏ GMiner v2.74
* improved stability for LHR mining
* improved LHR auto-tune
* now --proxy option using for user and dev fee connections
* added option to disable non ssl dev fee connections, using --dev_fee_ssl 0
* contest with prizes: 25 x 0.2 ETH, read rules at https://github.com/develsoftware/GMinerRelease/releases/tag/2.74
0.6-212@211207 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.31
* fixed bug in stratum code for Nicehash and the Hiveon pool, possibly affects to other pools as well;
* added support for NVIDIA compute 6.0, 7.0, 8.0 cards GV100, V100, GA100;
* fixed XINT,KERN, hashrate and hashrate/w in the stats when running with a selection of GPUs in the rig
⛏ NanoMiner v3.4.6
* significantly improved mining FIRO/firopow zombie mode on 4Gb AMD GPUs;
* fixed mining VerusCoin/verushash mining
⛏ BzMiner v5.0 Beta4
* added support kawpow algo;
* bux fixes
* version added for testing and review only, the latest version is still v4.7
0.6-212@211205 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.30
* implemented partial LHR unlock for all drivers and models could be enabled with --lhr-unlock option. Notice: LHR detector not implemented yet miner will reset the device every hour just in case
* removed vardiff in the display when pool has static diff
* reduced memory usage
* improved the stratum code: more compatible and should give less rejected shares
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.30
* implemented partial LHR unlock for all drivers and models could be enabled with --lhr-unlock option. Notice: LHR detector not implemented yet miner will reset the device every hour just in case
* removed vardiff in the display when pool has static diff
* reduced memory usage
* improved the stratum code: more compatible and should give less rejected shares
0.6-212@211203 🐧
What's new?
MINERS 👷♂️
⛏ lolMiner v1.38
* added DNS over HTTPS name resolving for establishing your pool connection: control by new option --dns-over-https where value 0 turns DNS over HTTPS off; 1: DNS over HTTPS is enabled, fallback to normal DNS resolving is possible (default)
* updated internal libraries for TLS connection handling
* moved more fee pools to use TLS connection
* changed LHR kernel defaults for RTX 3060 and RTX 3070, because the default ones had an issue with defect shares at high OC
⛏ SRBMiner-Multi v0.8.5
* performance increase on heavyhash algorithm for VEGA/RDNA/RDNA2 GPU's
* fixed verushash algorithm 'invalid solution version' error
⛏ XMRig v6.16.2
* fixed VAES support
⛏ XMRig-MO v6.16.2-mo2
* fixed VAES support, disabled VAES for cn-gpu algo
* synced code with XMRig v6.16.2
⛏ SGminer-fancyIX v0.8.0-3
* fixed performance issues with heavyhash
What's new?
MINERS 👷♂️
⛏ lolMiner v1.38
* added DNS over HTTPS name resolving for establishing your pool connection: control by new option --dns-over-https where value 0 turns DNS over HTTPS off; 1: DNS over HTTPS is enabled, fallback to normal DNS resolving is possible (default)
* updated internal libraries for TLS connection handling
* moved more fee pools to use TLS connection
* changed LHR kernel defaults for RTX 3060 and RTX 3070, because the default ones had an issue with defect shares at high OC
⛏ SRBMiner-Multi v0.8.5
* performance increase on heavyhash algorithm for VEGA/RDNA/RDNA2 GPU's
* fixed verushash algorithm 'invalid solution version' error
⛏ XMRig v6.16.2
* fixed VAES support
⛏ XMRig-MO v6.16.2-mo2
* fixed VAES support, disabled VAES for cn-gpu algo
* synced code with XMRig v6.16.2
⛏ SGminer-fancyIX v0.8.0-3
* fixed performance issues with heavyhash
💻 Hiveon ASIC Hub v1.4.1-beta.1
* Added Innosilicon A10X (A10 Pro) support
* Fixed hashrate for Innosilicon A10
* Renamed button "Add Credentials" to "Add custom Login/Password" in add device wizard
New Stable Image 0.6-212@211201 💿
Cumulative update: minor security and driver updates.
🔑 Key features:
* Universal boot mode: BIOS | UEFI
* Hive Linux client: v0.6-212@211201
* Ubuntu v18.04.6 LTS based
* Linux kernel: v5.10.83
* Nvidia driver: v470.86
* AMD driver v5.11.1001
* AMD OpenCL v20.40
🆚 Changelog vs previous Stable Image release:
* updated Linux kernel to v5.10.83
* updated Nvidia to latest production driver v470.86
* updated k10temp module to temp reporting support AMD APU Zen3 e.g. Ryzen 5 5600G
* added driver for Realtek RTL88xxBU based Wi-Fi dongles
This Image is recommended for Nvidia Pascal/Turing/Ampere and AMD Polaris/Vega/Navi/Big Navi
💾 Available for download as a torrent or XZ archive in the "GPU" section/Stable version: https://hiveos.farm/install/ and flashed with Rufus/balenaEtcher or it can be live replaced with the hive-replace tool via shell [ hive-replace -y --stable ]
Please help having issue on my miner cant able to determine the issue. Heres what I got when running it and it keeps restarting.
Edit: All seems ok now after downgraded to lower version. I dont know what the cause why it keeps restarting and it seems newer linux kernel doesnt work on older bios of btc pro motherboard.
Edit: All seems ok now after downgraded to lower version. I dont know what the cause why it keeps restarting and it seems newer linux kernel doesnt work on older bios of btc pro motherboard.
0.6-212@211130 🐧
What's new?
MINERS 👷♂️
⛏ lolMiner v1.37
* improved ethash performance on Nvidia Turing by about 0.4 to 0.7%;
* improvement of ethash performance on Nvidia Maxwell/Pascal up to 1%;
* changed LHR tuning algorithm to minimize the number of locks & time for finding a stable value;
* improved LHR performance for 3060 V1 on driver v460.39 and earlier;
* added ergo kernel for AMD RX 6600XT/6700XT for new drivers;
* a lot of improvements in terms of displaying information in the miner's log;
* various bug fixes; see all changes in full changelog
⛏ TeamBlackMiner v1.29 pre-release
* display difficulty change in the miner window;
* use ETH+ZIL shares when calculating pool speed and shares per minute;
* stratum change to avoid rejected shares on ezil.me and hiveon.net pools;
* the default --xintensity changed to 144 on NVIDIA to reduce stale/rejected on Hiveon, Crazypool, Flexpool, Etheremine and Binance pools
⛏ WildRig-Multi v0.31.1
* improved heavyhash up to 80% on Nvidia Pascal/Turing/Ampere;
* improved heavyhash up to 32% vs v0.30.9 on AMD RDNA/RDNA2 GPUs with less power consumption;
* added default parameters for CMP 40/50/70/90/170 HX and RTX A4500/5000/6000;
* fixed power jumps on NVIDIA GPUs;
* devfee set to 2% on heavyhash for Nvidia rigs
⛏ XMRig v6.16.1
* fixes for GhostRider: added average hashrate display, fixed the number of threads shown at startup;
* added VAES support for Cryptonight variants: up to +4% speedup on Zen3
⛏ XMRig-MO v6.16.1-mo1
* synced code with XMRig v6.16.1
⛏ SGminer-fancyIX v0.8.0
* start supporting heavyhash for oBTC
What's new?
MINERS 👷♂️
⛏ lolMiner v1.37
* improved ethash performance on Nvidia Turing by about 0.4 to 0.7%;
* improvement of ethash performance on Nvidia Maxwell/Pascal up to 1%;
* changed LHR tuning algorithm to minimize the number of locks & time for finding a stable value;
* improved LHR performance for 3060 V1 on driver v460.39 and earlier;
* added ergo kernel for AMD RX 6600XT/6700XT for new drivers;
* a lot of improvements in terms of displaying information in the miner's log;
* various bug fixes; see all changes in full changelog
⛏ TeamBlackMiner v1.29 pre-release
* display difficulty change in the miner window;
* use ETH+ZIL shares when calculating pool speed and shares per minute;
* stratum change to avoid rejected shares on ezil.me and hiveon.net pools;
* the default --xintensity changed to 144 on NVIDIA to reduce stale/rejected on Hiveon, Crazypool, Flexpool, Etheremine and Binance pools
⛏ WildRig-Multi v0.31.1
* improved heavyhash up to 80% on Nvidia Pascal/Turing/Ampere;
* improved heavyhash up to 32% vs v0.30.9 on AMD RDNA/RDNA2 GPUs with less power consumption;
* added default parameters for CMP 40/50/70/90/170 HX and RTX A4500/5000/6000;
* fixed power jumps on NVIDIA GPUs;
* devfee set to 2% on heavyhash for Nvidia rigs
⛏ XMRig v6.16.1
* fixes for GhostRider: added average hashrate display, fixed the number of threads shown at startup;
* added VAES support for Cryptonight variants: up to +4% speedup on Zen3
⛏ XMRig-MO v6.16.1-mo1
* synced code with XMRig v6.16.1
⛏ SGminer-fancyIX v0.8.0
* start supporting heavyhash for oBTC
0.6-212@211127 🐧
What's new?
MINERS 👷♂️
⛏ GMiner v2.73
* added LHR mode support for RTX 3060 GA104
* added option --lhr_autotune_step to control LHR tune step size
* added option --dag_gen_limit to control maximal number of parallel DAG generations
* display IP address of pool in statistics report
* restore overclocking after stopping of mining
⛏ SRBMiner-Multi v0.8.4
* performance increase on heavyhash algorithm for GPU's
* fixed display of hashrate while doing GPU auto tune process
* changed GPU temperature to show 'edge' value instead of 'hotspot'
⛏ XMRig v6.16.0
* added gr (GhostRider) algorithm support for RTM/Raptoreum mining
⛏ WildRig-Multi v0.30.9
* fixed low hashrate on heavyhash for AMD GPUs with old drivers
* added default parameters for NVIDIA RTX A2000, A3000 and A4000
0.6-212@211128 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.28
* improved performance for AMD cards on ETH+ZIL (dagger cache), +1-2%;
* added the possibility to mine to IP addresses directly instead of hostnames;
* disable CPU verification with --no-cpu option;
* fixed Hashrate/W in the stats for OpenCL rigs;
* slower DAG generation on --dagintensity 1 to be stable on higher clocks;
* reduced rejected/invalid shares on the ezil.me and the Hiveon pool +1-4%
⛏ PhoenixMiner v5.9d
* fixed issues with AMD RX6700XT with older drivers;
* other small fixes
⛏ XMRig-MO v6.16.0-mo1
* added gr (GhostRider) algorithm support for RTM/Raptoreum mining
* synced code with XMRig v6.16.0
What's new?
MINERS 👷♂️
⛏ GMiner v2.73
* added LHR mode support for RTX 3060 GA104
* added option --lhr_autotune_step to control LHR tune step size
* added option --dag_gen_limit to control maximal number of parallel DAG generations
* display IP address of pool in statistics report
* restore overclocking after stopping of mining
⛏ SRBMiner-Multi v0.8.4
* performance increase on heavyhash algorithm for GPU's
* fixed display of hashrate while doing GPU auto tune process
* changed GPU temperature to show 'edge' value instead of 'hotspot'
⛏ XMRig v6.16.0
* added gr (GhostRider) algorithm support for RTM/Raptoreum mining
⛏ WildRig-Multi v0.30.9
* fixed low hashrate on heavyhash for AMD GPUs with old drivers
* added default parameters for NVIDIA RTX A2000, A3000 and A4000
0.6-212@211128 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.28
* improved performance for AMD cards on ETH+ZIL (dagger cache), +1-2%;
* added the possibility to mine to IP addresses directly instead of hostnames;
* disable CPU verification with --no-cpu option;
* fixed Hashrate/W in the stats for OpenCL rigs;
* slower DAG generation on --dagintensity 1 to be stable on higher clocks;
* reduced rejected/invalid shares on the ezil.me and the Hiveon pool +1-4%
⛏ PhoenixMiner v5.9d
* fixed issues with AMD RX6700XT with older drivers;
* other small fixes
⛏ XMRig-MO v6.16.0-mo1
* added gr (GhostRider) algorithm support for RTM/Raptoreum mining
* synced code with XMRig v6.16.0
Our team has prepared something special for you: a Black Box for a Black Friday! 🎁🚀
The rules are simple: write what you think is inside the box in the comments: https://www.facebook.com/watch/?v=622486472503971
Each person has just one try. 🥷
Are you the first who answered correctly? Congrats, the box’s contents are yours!🎉
⚠️ Moreover, a person who gives the most creative answer will get a special present from Hiveon!
Go with your gut and give it a shot! 🚀
Good luck, everyone! 🪄
🤫p.s: no one said there's just one present in the box
The rules are simple: write what you think is inside the box in the comments: https://www.facebook.com/watch/?v=622486472503971
Each person has just one try. 🥷
Are you the first who answered correctly? Congrats, the box’s contents are yours!🎉
⚠️ Moreover, a person who gives the most creative answer will get a special present from Hiveon!
Go with your gut and give it a shot! 🚀
Good luck, everyone! 🪄
🤫p.s: no one said there's just one present in the box
0.6-212@211125 🐧
What's new?
SYSTEM 🖥
⚙️ Added display memory temperature for Nvidia GPUs equipped with HBM/HBM2 memory (e.g. A100, CMP 170HX, etc)
⚙️ Updated nvtool to v1.57
* added memory temperature reporting using option --memtemp for GPUs with HBM/HBM2 memory;
* added option --throttle to show throttle reason
* both options used by nvidia-info tool, so you can look all info using it
⚙️ Updated PCI IDs to v2021-11-20
⚙️ Updated amdmeminfo tool to v2.1.16
* added new & fixed some AMD GPUs names
⚙️ Fixed GPU detection on some server motherboards
⚙️ Minor fix for sreboot command
⚙️ Fixed bug with CPU-only rigs when there is no GPU in the system at all
MINERS 👷♂️
⛏ NBMiner v40.1
* added support future LHR GPU models;
* display current LHR value in console summary table;
* option proxy now support username & password for SOCKS5 proxy, format: "proxy": "user:pass@host:port";
* CPU share validation processed into independent thread;
* fixed LHR lock detection failure on some cases
⛏ WildRig-Multi v0.30.6
* one more round of heavyhash optimizations, up to 10% on some GPUs
⛏ NanoMiner v3.4.4
* improved performance of RandomX
⛏ PhoenixMiner v5.9c Release Candidate
* fixed some pool connection issues
⚙️ XLArig v5.2.3: fixed miner startup
⚙️ lolMiner: more clearer message when the GPU fails
⚙️ CPUMiner-Opt: fixed hashrate units
What's new?
SYSTEM 🖥
⚙️ Added display memory temperature for Nvidia GPUs equipped with HBM/HBM2 memory (e.g. A100, CMP 170HX, etc)
⚙️ Updated nvtool to v1.57
* added memory temperature reporting using option --memtemp for GPUs with HBM/HBM2 memory;
* added option --throttle to show throttle reason
* both options used by nvidia-info tool, so you can look all info using it
⚙️ Updated PCI IDs to v2021-11-20
⚙️ Updated amdmeminfo tool to v2.1.16
* added new & fixed some AMD GPUs names
⚙️ Fixed GPU detection on some server motherboards
⚙️ Minor fix for sreboot command
⚙️ Fixed bug with CPU-only rigs when there is no GPU in the system at all
MINERS 👷♂️
⛏ NBMiner v40.1
* added support future LHR GPU models;
* display current LHR value in console summary table;
* option proxy now support username & password for SOCKS5 proxy, format: "proxy": "user:pass@host:port";
* CPU share validation processed into independent thread;
* fixed LHR lock detection failure on some cases
⛏ WildRig-Multi v0.30.6
* one more round of heavyhash optimizations, up to 10% on some GPUs
⛏ NanoMiner v3.4.4
* improved performance of RandomX
⛏ PhoenixMiner v5.9c Release Candidate
* fixed some pool connection issues
⚙️ XLArig v5.2.3: fixed miner startup
⚙️ lolMiner: more clearer message when the GPU fails
⚙️ CPUMiner-Opt: fixed hashrate units
0.6-211@211121 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.27
* removed OpenCL support for Nvidia devices;
* uptime minutes is now accurate;
* stratum connect rewritten to solve libcurl error
⛏ WildRig-Multi v0.30.5
* improved heavyhash: Polaris/Vega up to 10%, RDNA/RDNA2 ~10-12%, Pascal ~90%, Turing/Ampere ~25%
⛏ CPUminer-Opt-JayDDee v3.19.1
* minor bug fixes
⛏ XLArig v5.2.3 XMRig fork
* rebase code to XMRig v6.10.0;
* removed code for GPU's: OpenCL/CUDA;
* removed non-randomx algos
🐞 SRBMiner: stats fix
* fixed total hashrate stats broken since v0.8.3 due changes in miner's API
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.27
* removed OpenCL support for Nvidia devices;
* uptime minutes is now accurate;
* stratum connect rewritten to solve libcurl error
⛏ WildRig-Multi v0.30.5
* improved heavyhash: Polaris/Vega up to 10%, RDNA/RDNA2 ~10-12%, Pascal ~90%, Turing/Ampere ~25%
⛏ CPUminer-Opt-JayDDee v3.19.1
* minor bug fixes
⛏ XLArig v5.2.3 XMRig fork
* rebase code to XMRig v6.10.0;
* removed code for GPU's: OpenCL/CUDA;
* removed non-randomx algos
🐞 SRBMiner: stats fix
* fixed total hashrate stats broken since v0.8.3 due changes in miner's API
0.6-211@211118 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.26
* added --lhr-unlock option that can give a +20% boost on LHR cards Nvidia with lower power..
* reduced duplicate shares on hiveon pool and possibly other ethereum stratum 1.0 pools
* faster reconnect to pool if pool does not resolve or is not available
* set --xintensity 24 default on ethermine for AMD cards
* fixed memleak in the DAG cache code when mining ETH+ZIL
⛏ WildRig-Multi v0.30.3
* fixed broken support since v0.30.2 of AMD RX 5500/5600/5700 GPUs
* implemented heavyhash, optimization for Nvidia GPUs expected with next release
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.26
* added --lhr-unlock option that can give a +20% boost on LHR cards Nvidia with lower power..
* reduced duplicate shares on hiveon pool and possibly other ethereum stratum 1.0 pools
* faster reconnect to pool if pool does not resolve or is not available
* set --xintensity 24 default on ethermine for AMD cards
* fixed memleak in the DAG cache code when mining ETH+ZIL
⛏ WildRig-Multi v0.30.3
* fixed broken support since v0.30.2 of AMD RX 5500/5600/5700 GPUs
* implemented heavyhash, optimization for Nvidia GPUs expected with next release
0.6-211@211117 🐧
What's new?
MINERS 👷♂️
⛏ GMiner v2.72
* fixed memory leaks on AMD GPUs;
* fixed compatibility with latest linux distributions;
* fixed crashes appeared in v2.71
⛏ SRBMiner-Multi v0.8.3
* performance increased on 'heavyhash' algorithm for GPU's: up to ~20% on some cards;
* fixed issue with recognizing some GPU's on newer drivers: broken since v0.8.1;
* reworked hashrate reporting/stats - now reporting average for 1 min / 1 hr / 6 hr / 12 hr
What's new?
MINERS 👷♂️
⛏ GMiner v2.72
* fixed memory leaks on AMD GPUs;
* fixed compatibility with latest linux distributions;
* fixed crashes appeared in v2.71
⛏ SRBMiner-Multi v0.8.3
* performance increased on 'heavyhash' algorithm for GPU's: up to ~20% on some cards;
* fixed issue with recognizing some GPU's on newer drivers: broken since v0.8.1;
* reworked hashrate reporting/stats - now reporting average for 1 min / 1 hr / 6 hr / 12 hr
0.6-211@211116 🐧
What's new?
MINERS 👷♂️
⛏ lolMiner v1.36a
* improved ethash & etchash performance on all Nvidia Turing & Ampere GPUs by 0.3 to 0.7%;
* decreased rate of stales on Nvidia Turing & Ampere GPUs;
* modified LHR auto tuning to use finer steps: 0.2 instead of 1;
* new option --lhrwait n will set the miner to wait n seconds, until the LHR detection and calibration gets active;
* fixed a potential crash on switching between cached Eth and Zil DAG on Nvidia cards;
* fixed lost empty worker name on ezil pool;
* fixed a bug causing rare defect shares on LHR GPUs
⛏ TeamBlackMiner v1.25
* added stats for AMD GPUs;
* don't add hashrate when validating DAG on AMD GPUs;
* tiny speedup on NVIDIA cards;
* default xintensity on Hiveon and Binance pools changed to 24 to reduce stales on AMD GPUs
⛏ WildRig-Multi v0.30.2
* added support SSL;
* slightly faster ghostrider ~1-2%
⛏ PhoenixMiner v5.9b BETA
* show the GPU vendor name in the list of GPUs to make it easier to identify the GPUs;
* added support for the latest official AMD Linux drivers 21.40.1;
* fixed issues with AMD Vega, Radeon VII, RX6700XT cards with the latest AMD drivers;
* fixed crash with very old Nvidia drivers;
* Notes: added for testing purposes - need select version manually in miner settings
What's new?
MINERS 👷♂️
⛏ lolMiner v1.36a
* improved ethash & etchash performance on all Nvidia Turing & Ampere GPUs by 0.3 to 0.7%;
* decreased rate of stales on Nvidia Turing & Ampere GPUs;
* modified LHR auto tuning to use finer steps: 0.2 instead of 1;
* new option --lhrwait n will set the miner to wait n seconds, until the LHR detection and calibration gets active;
* fixed a potential crash on switching between cached Eth and Zil DAG on Nvidia cards;
* fixed lost empty worker name on ezil pool;
* fixed a bug causing rare defect shares on LHR GPUs
⛏ TeamBlackMiner v1.25
* added stats for AMD GPUs;
* don't add hashrate when validating DAG on AMD GPUs;
* tiny speedup on NVIDIA cards;
* default xintensity on Hiveon and Binance pools changed to 24 to reduce stales on AMD GPUs
⛏ WildRig-Multi v0.30.2
* added support SSL;
* slightly faster ghostrider ~1-2%
⛏ PhoenixMiner v5.9b BETA
* show the GPU vendor name in the list of GPUs to make it easier to identify the GPUs;
* added support for the latest official AMD Linux drivers 21.40.1;
* fixed issues with AMD Vega, Radeon VII, RX6700XT cards with the latest AMD drivers;
* fixed crash with very old Nvidia drivers;
* Notes: added for testing purposes - need select version manually in miner settings
0.6-211@211112 🐧
What's new?
MINERS 👷♂️
⛏ T-Rex v0.24.7
* bug fix: some options set in config file not processed, e.g. lhr-autotune-step-size
* removed "hashrate-avr": 30 from global config to use miner default option and get smoother graph e.g. on LHR GPUs
What's new?
MINERS 👷♂️
⛏ T-Rex v0.24.7
* bug fix: some options set in config file not processed, e.g. lhr-autotune-step-size
* removed "hashrate-avr": 30 from global config to use miner default option and get smoother graph e.g. on LHR GPUs
0.6-211@211111 🐧
What's new?
MINERS 👷♂️
⛏ T-Rex v0.24.6
* improved ethash LHR unlocker, LHR tune value increased from 71 to 74 by default;
* added new parameters lhr-autotune-step-size and lhr-autotune-interval parameters for finer control of LHR unlock behaviour on ethash and autolykos2;
* added ETH+FIRO dual mining, use the same OC settings as ETH+RVN;
* added new autolykos2 parameter dataset-mode parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode, default;
* added SOCKS5 proxy support, see proxy parameter;
* Bug fixes:
- RTX 3060 GA104 is not recognized as an LHR card on ethash
- mining veriblock is broken since v0.24.2
⛏ TeamBlackMiner v1.24
* fixed issue with multiple set core, mem, power;
* fixed issue with DAG cache when switching back from ZIL pow, also fixing problems at Nicehash;
* always verify DAG on regeneration, not only on the first run;
* log date time format is now DD:HH:MM
⛏ NanoMiner v3.4.3
* improved performance kawpow and firopow on Nvidia GPUs up to 3% depends on GPU model
⛏ CPUminer-Opt-JayDDee v3.19.0
* implemented some changes to cpu-affinity;
* faster sha256t with AVX512 & AVX2;
* added stratum error count to stats log, reported only when non-zero
What's new?
MINERS 👷♂️
⛏ T-Rex v0.24.6
* improved ethash LHR unlocker, LHR tune value increased from 71 to 74 by default;
* added new parameters lhr-autotune-step-size and lhr-autotune-interval parameters for finer control of LHR unlock behaviour on ethash and autolykos2;
* added ETH+FIRO dual mining, use the same OC settings as ETH+RVN;
* added new autolykos2 parameter dataset-mode parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode, default;
* added SOCKS5 proxy support, see proxy parameter;
* Bug fixes:
- RTX 3060 GA104 is not recognized as an LHR card on ethash
- mining veriblock is broken since v0.24.2
⛏ TeamBlackMiner v1.24
* fixed issue with multiple set core, mem, power;
* fixed issue with DAG cache when switching back from ZIL pow, also fixing problems at Nicehash;
* always verify DAG on regeneration, not only on the first run;
* log date time format is now DD:HH:MM
⛏ NanoMiner v3.4.3
* improved performance kawpow and firopow on Nvidia GPUs up to 3% depends on GPU model
⛏ CPUminer-Opt-JayDDee v3.19.0
* implemented some changes to cpu-affinity;
* faster sha256t with AVX512 & AVX2;
* added stratum error count to stats log, reported only when non-zero
Jump to: