Topic: Hiveon. №1 OS for mining - page 4. (Read 80796 times)
Why do I have to login to my HIVEON portal every day now on my web browser instead of every 30 days? It's annoying after the huge downtime a few days ago and this change was made.
0.6-217@220519 💙💛
What's new?
MINERS 👷♂️
⛏ lolMiner v1.51
* Extended working range of 100% LHR unlocker to 470 series drivers.
📝 Note: Please do not use the new 515.x drivers - the unlock currently does not work on them.
* New parameter for dualmining: --dualfactor (default: "auto").
* Fixed a bug causing the Zombie mode on 5G Pascal GPUs (1060 5G, P2000) not to work.
* Minor LHR unlocker stability improvements.
⛏ BzMiner v9.1.4
* Fixed 100% LHR Unlock v1 not working on older Linux Nvidia drivers
* Added --cache_dag option for ETH+ZIL mining
* Fixed ezil protocol
* Other small improvements and bug fixes, see full changelog
What's new?
MINERS 👷♂️
⛏ lolMiner v1.51
* Extended working range of 100% LHR unlocker to 470 series drivers.
📝 Note: Please do not use the new 515.x drivers - the unlock currently does not work on them.
* New parameter for dualmining: --dualfactor (default: "auto").
* Fixed a bug causing the Zombie mode on 5G Pascal GPUs (1060 5G, P2000) not to work.
* Minor LHR unlocker stability improvements.
⛏ BzMiner v9.1.4
* Fixed 100% LHR Unlock v1 not working on older Linux Nvidia drivers
* Added --cache_dag option for ETH+ZIL mining
* Fixed ezil protocol
* Other small improvements and bug fixes, see full changelog
0.6-217@220518 💙💛
What's new?
MINERS 👷♂️
⛏ GMiner v2.96
* LHR unlock for older drivers: fixed "LHR unlock failed" error on old drivers.
⛏ TeamRedMiner v0.10.0
* Introduced R-mode: applicable for Vegas/VIIs/Navi10/Big Navi.
see separate miner documentation for details
* Smooth power transitions for ethash family algos.
* Added argument --gpu_sdma=on|off for special situations, e.g. BC-250 needs --gpu_sdma=off.
⛏ T-Rex v0.26.3 BETA
* Improved LHR unlocker stability.
📝 Notes:
* This is a beta version, to test it you need to manually select this version in miner settings.
What's new?
MINERS 👷♂️
⛏ GMiner v2.96
* LHR unlock for older drivers: fixed "LHR unlock failed" error on old drivers.
⛏ TeamRedMiner v0.10.0
* Introduced R-mode: applicable for Vegas/VIIs/Navi10/Big Navi.
see separate miner documentation for details
* Smooth power transitions for ethash family algos.
* Added argument --gpu_sdma=on|off for special situations, e.g. BC-250 needs --gpu_sdma=off.
⛏ T-Rex v0.26.3 BETA
* Improved LHR unlocker stability.
📝 Notes:
* This is a beta version, to test it you need to manually select this version in miner settings.
0.6-217@220516 💙💛
What's new?
MINERS 👷♂️
⛏ GMiner v2.95
* 90% LHR unlock for LHRv3 GPUs; : RTX 3050 and RTX 3080 12GB
* removed AE/Aeternity algorithm support
* removed Tor support
What's new?
MINERS 👷♂️
⛏ GMiner v2.95
* 90% LHR unlock for LHRv3 GPUs; : RTX 3050 and RTX 3080 12GB
* removed AE/Aeternity algorithm support
* removed Tor support
0.6-217@220515 💙💛
What's new?
MINERS 👷♂️
⛏ lolMiner v1.50 RELEASE
* 100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs
* Added experimental LHR v3 unlock to ~90% (3050) and ~92% on 3080 12G, enable by default, use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock
* If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established
* Fixed a bug in v1.49 causing Ergo mining not to start on Nvidia GPUs
⛏ BzMiner v9.1.3
* Much more stable 100% LHR Unlock v1, supported on drivers 465+
* LHR Unlock stability adjuster with option --lhr_stability, lower value is more stable
What's new?
MINERS 👷♂️
⛏ lolMiner v1.50 RELEASE
* 100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs
* Added experimental LHR v3 unlock to ~90% (3050) and ~92% on 3080 12G, enable by default, use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock
* If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established
* Fixed a bug in v1.49 causing Ergo mining not to start on Nvidia GPUs
⛏ BzMiner v9.1.3
* Much more stable 100% LHR Unlock v1, supported on drivers 465+
* LHR Unlock stability adjuster with option --lhr_stability, lower value is more stable
0.6-217@220513 💙💛
What's new?
MINERS 👷♂️
⛏ GMiner v2.94
* improved performance for LHRv3 GPUs: RTX 3050 and RTX 3080 12GB
What's new?
MINERS 👷♂️
⛏ GMiner v2.94
* improved performance for LHRv3 GPUs: RTX 3050 and RTX 3080 12GB
0.6-217@220512 💙💛
What's new?
MINERS 👷♂️
⛏ NBMiner v41.5
* added ethash 90% LHR unlocker for 3080 12G & 3050;
* added ergo LHR unlocker support;
* improved ethash LHR unlocker stability
⛏ GMiner v2.93
* fixed performance degradation on FHR cards, appeared in v2.92
📝 Notes:
* latest miner releases for Nvidia LHR unlocker require Nvidia driver 510 series
What's new?
MINERS 👷♂️
⛏ NBMiner v41.5
* added ethash 90% LHR unlocker for 3080 12G & 3050;
* added ergo LHR unlocker support;
* improved ethash LHR unlocker stability
⛏ GMiner v2.93
* fixed performance degradation on FHR cards, appeared in v2.92
📝 Notes:
* latest miner releases for Nvidia LHR unlocker require Nvidia driver 510 series
0.6-217@220511 💙💛
What's new?
MINERS 👷♂️
⛏ lolMiner v1.50 BETA
* 100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs.
📝 Notes:
* This is a beta version, to test it you need to manually select version 1.50 in miner settings.
* Required drivers: 510.60.02 or 510.68.
* The miner will unlock the cards approximately 30 seconds after start. Please make sure all OC operations are completed before.
* On dual mining the LHR cards will now behave like full hash rate cards. This means dual mining tuning will start approximately 1 Minute after the DAG build is completed.
⛏ GMiner v2.92
* LHR 100% Unlock.
📝 Notes: LHR unlocker required Nvidia drivers 510 series
⛏ BzMiner v9.1.0
* unstable/experimental 100% LHR Unlock v1.
* LHR Unlock stability adjuster --lhr_stability.
* GDDR5 --oc_mem_tweak option.
⛏ T-Rex
* v0.26.1 now set as latest version in miner options.
What's new?
MINERS 👷♂️
⛏ lolMiner v1.50 BETA
* 100% LHR unlock for all LHR affected algorithms on LHR v1 and v2 GPUs.
📝 Notes:
* This is a beta version, to test it you need to manually select version 1.50 in miner settings.
* Required drivers: 510.60.02 or 510.68.
* The miner will unlock the cards approximately 30 seconds after start. Please make sure all OC operations are completed before.
* On dual mining the LHR cards will now behave like full hash rate cards. This means dual mining tuning will start approximately 1 Minute after the DAG build is completed.
⛏ GMiner v2.92
* LHR 100% Unlock.
📝 Notes: LHR unlocker required Nvidia drivers 510 series
⛏ BzMiner v9.1.0
* unstable/experimental 100% LHR Unlock v1.
* LHR Unlock stability adjuster --lhr_stability.
* GDDR5 --oc_mem_tweak option.
⛏ T-Rex
* v0.26.1 now set as latest version in miner options.
0.6-217@220510-2 💙💛
What's new?
MINERS 👷♂️
⛏ miniZ v1.8z2
* added support for 144,5 and ethash for AMD Polaris and gfx1071 / RX 6700 XT;
* fixed issues with AMD support 125,4 (Flux)
⛏ TeamRedMiner v0.9.4.7 BETA
* fixed issues with hashrate drop on Navi GPUs in R-mode
Notes:
* Beta version for testing purposes you should select version manually in miner settings
⛏ NBMiner v41.4 TEST
* experemental ethash LHR unlocker ONLY for RTX 3080 12G and RTX 3050, expected hashrate: 3080 12G - 100MH/s, 3050 - 27MH/s;
Notes:
* 510 series driver required to work correctly - tested on v510.60.02 and v510.68.02 drivers
* Beta version for testing purposes you should select version manually in miner settings
What's new?
MINERS 👷♂️
⛏ miniZ v1.8z2
* added support for 144,5 and ethash for AMD Polaris and gfx1071 / RX 6700 XT;
* fixed issues with AMD support 125,4 (Flux)
⛏ TeamRedMiner v0.9.4.7 BETA
* fixed issues with hashrate drop on Navi GPUs in R-mode
Notes:
* Beta version for testing purposes you should select version manually in miner settings
⛏ NBMiner v41.4 TEST
* experemental ethash LHR unlocker ONLY for RTX 3080 12G and RTX 3050, expected hashrate: 3080 12G - 100MH/s, 3050 - 27MH/s;
Notes:
* 510 series driver required to work correctly - tested on v510.60.02 and v510.68.02 drivers
* Beta version for testing purposes you should select version manually in miner settings
0.6-217@220510 💙💛
What's new?
MINERS 👷♂️
⛏ NBMiner v41.3
* Improved ethash LHR unlock stability.
* Fixed crash on AMD GPUs.
* Improved compatibility on rigs with small system memory.
Notes: 510 series driver required to work correctly - tested on v510.60.02 and v510.68.02 drivers.
⛏ T-Rex v0.26.1 BETA
* introduced LHR 100% unlock, except 3080 12GB and 3050, ETH+ALPH should also work.
Notes: This is a test version, to test it you need to manually select version 0.26.1 in miner settings.
What's new?
MINERS 👷♂️
⛏ NBMiner v41.3
* Improved ethash LHR unlock stability.
* Fixed crash on AMD GPUs.
* Improved compatibility on rigs with small system memory.
Notes: 510 series driver required to work correctly - tested on v510.60.02 and v510.68.02 drivers.
⛏ T-Rex v0.26.1 BETA
* introduced LHR 100% unlock, except 3080 12GB and 3050, ETH+ALPH should also work.
Notes: This is a test version, to test it you need to manually select version 0.26.1 in miner settings.
0.6-217@220508 💙💛
What's new?
MINERS 👷♂️
⛏ NBMiner v41.0
* Introduced 100% LHR unlocker for ethash
Tested and verified on drivers v510.60. If you run into issues change driver to 510 series using nvidia-driver-update command, set your memclock 100-200 MHz lower that previous LHR partial unlock
⛏ lolMiner v1.49
* Improved performance of Nvidia LHR V2 cards in Ethash to 79 - 79.5% (86.5 - 87 % on RTX 3060 V1 and 460.39 driver). Note that dual mode codes remain unchanged.
* Added an experimental zombie mode for Nvidia Pascal generation 5GB cards, allowing them to continue mining Ethash after epoch 492 (in Linux)
* Reduced fee for LHR unlocker back to 0.7%. Now all Ethash solo codes have only 0.7% fee (again).
* LHR cards that have memory junction temperature sensors will automatically throttle LHR unlock by ~0.4 - 0.5% when hitting 106° C memory clock to prevent unneeded locks
* LHR calibration on startup now taking approx 2 minutes instead of 4.
* Extended CRC table for Ethash up until epoch 550
* Changed default behavior for "." signs in wallet address when Ton or Aleph dual mining. These will now automatically separate the string at the given position, so the thing after a . is treated as worker name.
⛏ TeamRedMiner v0.9.4.6 Public Beta Test
* Introduced R-mode: applicable for Vegas/VIIs/Navi10/Big Navi, see separate miner documentation
* Smooth power transitions for ethash family algos
To test the new R-mode you need the latest Stable Image with OpenCL 21.40+, select the miner version manually in miner settings and follow the official manual or use the following command:
What's new?
MINERS 👷♂️
⛏ NBMiner v41.0
* Introduced 100% LHR unlocker for ethash
Tested and verified on drivers v510.60. If you run into issues change driver to 510 series using nvidia-driver-update command, set your memclock 100-200 MHz lower that previous LHR partial unlock
⛏ lolMiner v1.49
* Improved performance of Nvidia LHR V2 cards in Ethash to 79 - 79.5% (86.5 - 87 % on RTX 3060 V1 and 460.39 driver). Note that dual mode codes remain unchanged.
* Added an experimental zombie mode for Nvidia Pascal generation 5GB cards, allowing them to continue mining Ethash after epoch 492 (in Linux)
* Reduced fee for LHR unlocker back to 0.7%. Now all Ethash solo codes have only 0.7% fee (again).
* LHR cards that have memory junction temperature sensors will automatically throttle LHR unlock by ~0.4 - 0.5% when hitting 106° C memory clock to prevent unneeded locks
* LHR calibration on startup now taking approx 2 minutes instead of 4.
* Extended CRC table for Ethash up until epoch 550
* Changed default behavior for "." signs in wallet address when Ton or Aleph dual mining. These will now automatically separate the string at the given position, so the thing after a . is treated as worker name.
⛏ TeamRedMiner v0.9.4.6 Public Beta Test
* Introduced R-mode: applicable for Vegas/VIIs/Navi10/Big Navi, see separate miner documentation
* Smooth power transitions for ethash family algos
To test the new R-mode you need the latest Stable Image with OpenCL 21.40+, select the miner version manually in miner settings and follow the official manual or use the following command:
Code:
echo -e "amdgpu.vm_block_size=11\namdgpu.vm_size=2048" > /hive/etc/grub.custom && selfupgrade -g && sreboot
0.6-217@220505 💙💛
What's new?
MINERS 👷♂️
⛏ BzMiner v9.0.2
* GDDR5 Memory Tweak with --oc_mem_tweak option;
* Memory timings table display;
* Bug Fixes:
- solution latency reporting slowly increasing;
- crash at startup in some cases;
- Ixian not submitting found solutions after some time
What's new?
MINERS 👷♂️
⛏ BzMiner v9.0.2
* GDDR5 Memory Tweak with --oc_mem_tweak option;
* Memory timings table display;
* Bug Fixes:
- solution latency reporting slowly increasing;
- crash at startup in some cases;
- Ixian not submitting found solutions after some time
0.6-217@220504 💙💛
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.63
* added support for SSL mining/anonymous mining;
* reduced GPU memory requirements in copy DAG mode to extend the life of low memory cards;
* new fix for GPU timeout on AMD cards with high intensity;
* some short options changed names
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.63
* added support for SSL mining/anonymous mining;
* reduced GPU memory requirements in copy DAG mode to extend the life of low memory cards;
* new fix for GPU timeout on AMD cards with high intensity;
* some short options changed names
0.6-217@220503 💙💛
What's new?
MINERS 👷♂️
⛏ T-Rex v0.25.15
* extend the new LHR unlock functionality to ETH+ALPH dual mining, and ERGO single mode;
* allow LHR setting "up" and "down" auto-tune intervals separately: e.g. "lhr-autotune-interval": "5:120", meaning that in lhr-autotune-mode full mode the miner will be increasing LHR tune value every 5 minutes, and decreasing it as soon as it starts tripping LHR more frequently than once every 2 hours;
* changed lhr-autotune-step-size default value to 0.1 from previously 0.5;
* LHR low power mode can now be set for GPUs individually, e.g. "lhr-low-power": "0,1,1,0" - the second and third GPUs will be working in low power mode
* LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved now;
* fixed "Duplicate share" issue on ethash and blake3 algos
IMPORTANT: LHR unlocker requires 510 series drivers and it will not work properly with older drivers
⛏ PhoenixMiner v6.2c BETA
* using newer AMD RX4xx/5xx kernels even on older drivers e.g. 19.10, older kernels on these drivers, use the new command line parameter -clabi 1;
* added a workaround for the SSL pools with self-signed or expired SSL certificate: you can use the new command-line parameter -weakssl (for the pool specified by -pool), or the new WEAKSSL: 1 option for the pools in epools.txt;
* fixed a crash with Nvidia cards on some older drivers, if PhoenixMiner crashes or exits while showing "Initializing NVML..." try the new command line parameter -nvmalt;
* other small fixes
⛏ SGMiner-fancyIX v0.9.4
* auto detect Navi cards and use _navi algorithm name;
* fixed regression on neoscrypt algo
What's new?
MINERS 👷♂️
⛏ T-Rex v0.25.15
* extend the new LHR unlock functionality to ETH+ALPH dual mining, and ERGO single mode;
* allow LHR setting "up" and "down" auto-tune intervals separately: e.g. "lhr-autotune-interval": "5:120", meaning that in lhr-autotune-mode full mode the miner will be increasing LHR tune value every 5 minutes, and decreasing it as soon as it starts tripping LHR more frequently than once every 2 hours;
* changed lhr-autotune-step-size default value to 0.1 from previously 0.5;
* LHR low power mode can now be set for GPUs individually, e.g. "lhr-low-power": "0,1,1,0" - the second and third GPUs will be working in low power mode
* LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved now;
* fixed "Duplicate share" issue on ethash and blake3 algos
IMPORTANT: LHR unlocker requires 510 series drivers and it will not work properly with older drivers
⛏ PhoenixMiner v6.2c BETA
* using newer AMD RX4xx/5xx kernels even on older drivers e.g. 19.10, older kernels on these drivers, use the new command line parameter -clabi 1;
* added a workaround for the SSL pools with self-signed or expired SSL certificate: you can use the new command-line parameter -weakssl (for the pool specified by -pool), or the new WEAKSSL: 1 option for the pools in epools.txt;
* fixed a crash with Nvidia cards on some older drivers, if PhoenixMiner crashes or exits while showing "Initializing NVML..." try the new command line parameter -nvmalt;
* other small fixes
⛏ SGMiner-fancyIX v0.9.4
* auto detect Navi cards and use _navi algorithm name;
* fixed regression on neoscrypt algo
0.6-217@220428 💙💛
What's new?
MINERS 👷♂️
⛏ BzMiner v9.0.0
* added support mining IXI / Ixian coin;
* many improvements & fixes for mining Kaspa;
* bug fixes
⛏ miniZ v1.8z
* improved performance and stability for ETH for LHR GPUs;
* improved performance on 125,4 for RTX 30xx;
* added AMD Polaris support for 125,4;
* added FIRO support;
* fixed issues with SERO and 192,7;
* minor bug fixes
⛏ T-Rex v0.25.13 TEST
* extend the new LHR unlock functionality to ETH+ALPH dual mining, and ERGO single mode;
* LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved now;
* Note: Beta version for testing purposes. You can select it manually in miner settings.
What's new?
MINERS 👷♂️
⛏ BzMiner v9.0.0
* added support mining IXI / Ixian coin;
* many improvements & fixes for mining Kaspa;
* bug fixes
⛏ miniZ v1.8z
* improved performance and stability for ETH for LHR GPUs;
* improved performance on 125,4 for RTX 30xx;
* added AMD Polaris support for 125,4;
* added FIRO support;
* fixed issues with SERO and 192,7;
* minor bug fixes
⛏ T-Rex v0.25.13 TEST
* extend the new LHR unlock functionality to ETH+ALPH dual mining, and ERGO single mode;
* LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved now;
* Note: Beta version for testing purposes. You can select it manually in miner settings.
⚡️ Stable Image 0.6-217@220423 💿
🔑 Key features:
* Hive Linux client: v0.6-217@220422
* Ubuntu v18.04.6 LTS based
* Linux kernel: v5.10.110
* Nvidia driver: v510.60.02
* AMD driver/OpenCL: v5.13.0201/v21.40.1
🆚 Changelog vs previous Stable Image release:
* updated Linux kernel to v5.10.110
* updated Nvidia to latest production driver v510.60.02
* updated AMD OpenCL to v21.40.1
* updated amdgpu Linux kernel module to v5.13.0201 to support AMD BC-250 board and Navi24 based GPUs like RX 6500 XT
✴️ Reupload changes:
* fixed issues with some miners and AMD GPUs on certain configurations
* updated Hive client to latest
This Image is recommended for Nvidia Pascal/Turing/Ampere and AMD Polaris/Vega/Navi/Big Navi
💾 Available for download as a torrent or XZ archive in the "GPU" section/Stable version: https://hiveos.farm/install/ and flashed with Rufus/balenaEtcher or it can be live replaced with the hive-replace tool via shell [hive-replace -y --stable]
Please try to use other means of payment apart from polygon thats just been introduced, look into Nano payment and other cheap options this will drive traffic to hiveon pool because everyone I knew is complaining, keep up the good work.
BSC, BTC yes or nano ! but pool PPS+ is not best for more profit
Please try to use other means of payment apart from polygon thats just been introduced, look into Nano payment and other cheap options this will drive traffic to hiveon pool because everyone I knew is complaining, keep up the good work.
Hiveon OS v0.6-217@220422 💙💛
What's new?
SYSTEM 🖥
🐞 Fixed bug with AMD OC
* Overclocking for Radeon Pro VII and Radeon Pro W5700 applied incorrectly since the version v0.6-214
⚙️ Minor updates
* Updated PCI IDs to v2022.04.16: added new IDs eg. Nvidia RTX 3090 Ti, A4000H
MINERS 👷♂️
⛏ NanoMiner v3.6.2
* significantly reduced stale Ethash shares on Nvidia GPUs
⛏ XMRig-XMRigCC v3.2.1
* rebase upstream 6.17.1-dev;
* integrated XDagger Randomx variant rx/xdag;
* fixed Yadacoin rx/yada mining
What's new?
SYSTEM 🖥
🐞 Fixed bug with AMD OC
* Overclocking for Radeon Pro VII and Radeon Pro W5700 applied incorrectly since the version v0.6-214
⚙️ Minor updates
* Updated PCI IDs to v2022.04.16: added new IDs eg. Nvidia RTX 3090 Ti, A4000H
MINERS 👷♂️
⛏ NanoMiner v3.6.2
* significantly reduced stale Ethash shares on Nvidia GPUs
⛏ XMRig-XMRigCC v3.2.1
* rebase upstream 6.17.1-dev;
* integrated XDagger Randomx variant rx/xdag;
* fixed Yadacoin rx/yada mining
Hiveon OS v0.6-216@220418 💙💛
What's new?
SYSTEM 🖥
⚙️ Small improvements
* Minor changes to ensure compatibility with newer Linux kernels and future OS Images
* Reworked miner installation and update procedure
⚙️ Minor bug fixes
MINERS 👷♂️
⛏ SGminer-fancyIX v0.9.3
* fixed `yescryptr16` invalid shares problem
What's new?
SYSTEM 🖥
⚙️ Small improvements
* Minor changes to ensure compatibility with newer Linux kernels and future OS Images
* Reworked miner installation and update procedure
⚙️ Minor bug fixes
MINERS 👷♂️
⛏ SGminer-fancyIX v0.9.3
* fixed `yescryptr16` invalid shares problem
Jump to: