0.6-213@220304 💙💛
What's new?
MINERS 👷♂️
⛏ BzMiner v8.0.0
* Added support for mining Kaspa with experimental pool support;
* Lower Alephium devfee to 0.5%;
* Higher Alephium effective hashrate;
* New Dual mine options: parallel, alternating, dag only;
* Bug fixes
Topic: Hiveon. №1 OS for mining - page 6. (Read 80840 times)
In order to complete the wavlink range extender configuration, you need to access the administration login page by typing the default IP Address or http //ap.setup wavlink in the address field and search for it. You will redirect to the administration page. After login can make changes and set up without any issues. Be sure to change the administrator login password.
0.6-213@220302 💙💛
What's new?
MINERS 👷♂️
⛏ GMiner v2.83
* Added wss protocol support for TON mining, now miner support all major mining pools: ton-pool.com, tonwhales.com and icemining.ca;
* Fixed miner crash on TON connection loss in dual mining
0.6-213@220301 💙💛
What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.9.4
* Rewrite code for Navi/Big Navi for eth+ton, increased hashrates on both algos and more stable setup;
* Rewrite code for Navi/Big Navi for eth+ton rigs with stale eth issues should be fixed;
* Pool outage for dual algo now results in eth mining only instead of pausing - this will reduce crashes;
* Fixed a potential deadlock when mining eth+ton. Rigs that have gotten strange "crashes" should upgrade, especially when coupled with a network or pool outage;
* Added --dual_tuner_step and --dual_tuner_period to configure the dual tuner accuracy;
* Fixed race bug for ethash where gpus could accidentally build a dag for epoch 0 at startup
⛏ GMiner v2.82
* Added support of stratum protocol for TON;
* display additional information for dual mining: dual server, pool speed, shares per minute;
* fixed incorrect displaying of TON hashrate in dual mining on LHR GPUs
⛏ SRBMiner-Multi v0.9.2
* Added algorithm dynamo for GPU mining and lowered devfee to 1%;
* some other improvements and fixes
⛏ TeamBlackMiner v1.57
* Fixed rejects on binance.com and gpumine.org
⛏ CPUMiner-Opt-Rplant v5.0.27
* added phichox algo;
* bug fixes
What's new?
MINERS 👷♂️
⛏ GMiner v2.83
* Added wss protocol support for TON mining, now miner support all major mining pools: ton-pool.com, tonwhales.com and icemining.ca;
* Fixed miner crash on TON connection loss in dual mining
0.6-213@220301 💙💛
What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.9.4
* Rewrite code for Navi/Big Navi for eth+ton, increased hashrates on both algos and more stable setup;
* Rewrite code for Navi/Big Navi for eth+ton rigs with stale eth issues should be fixed;
* Pool outage for dual algo now results in eth mining only instead of pausing - this will reduce crashes;
* Fixed a potential deadlock when mining eth+ton. Rigs that have gotten strange "crashes" should upgrade, especially when coupled with a network or pool outage;
* Added --dual_tuner_step and --dual_tuner_period to configure the dual tuner accuracy;
* Fixed race bug for ethash where gpus could accidentally build a dag for epoch 0 at startup
⛏ GMiner v2.82
* Added support of stratum protocol for TON;
* display additional information for dual mining: dual server, pool speed, shares per minute;
* fixed incorrect displaying of TON hashrate in dual mining on LHR GPUs
⛏ SRBMiner-Multi v0.9.2
* Added algorithm dynamo for GPU mining and lowered devfee to 1%;
* some other improvements and fixes
⛏ TeamBlackMiner v1.57
* Fixed rejects on binance.com and gpumine.org
⛏ CPUMiner-Opt-Rplant v5.0.27
* added phichox algo;
* bug fixes
We still working on tech issues, which may take more time than we thought, so we asking about patience in advance. Thank you for understanding!
How many years you need for individual per gpu fan settings?
individual autofan?? i think this will be awesome!!!
We still working on tech issues, which may take more time than we thought, so we asking about patience in advance. Thank you for understanding!
How many years you need for individual per gpu fan settings?
0.6-213@220220 🐧
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.56
* Fixed timeoutson AMD GPUs
* Fixed rejects at crazypool
What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.56
* Fixed timeoutson AMD GPUs
* Fixed rejects at crazypool
0.6-213@220219 🐧
What's new?
MINERS 👷♂️
⛏ GMiner v2.79
* Added ETH+TON solver for Nvidia GPUs, LHR and non-LHR cards are supported, fee for this mode is 1.5% for ethash and 0% for TON;
* Added TON solver for Nvidia GPUs, fee is 2%;
* To setup ETH+TON dual mining mode in Hive OS please select ethash for primary algo and ton for secondary algo in miner settings
⛏ TeamRedMiner v0.9.2.2
* Added Vega support for dual ETH+TON;
* Added automatic TON pool dialect for Whales Ton Pool at tcp.whalestonpool.com
What's new?
MINERS 👷♂️
⛏ GMiner v2.79
* Added ETH+TON solver for Nvidia GPUs, LHR and non-LHR cards are supported, fee for this mode is 1.5% for ethash and 0% for TON;
* Added TON solver for Nvidia GPUs, fee is 2%;
* To setup ETH+TON dual mining mode in Hive OS please select ethash for primary algo and ton for secondary algo in miner settings
⛏ TeamRedMiner v0.9.2.2
* Added Vega support for dual ETH+TON;
* Added automatic TON pool dialect for Whales Ton Pool at tcp.whalestonpool.com
Hy,
When update TeamRedMiner?
New: Team Red Miner v0.9.2.2
When update TeamRedMiner?
New: Team Red Miner v0.9.2.2
Hiveon ASIC Hub v1.5.0-beta.7 💻
What's new?
* Added Bitmain A3, DR3, E3, L3+, X3, Z9 support
* Added new parameters to config: AddDelayOnMonitoringStart, BufferTTL, BulkStatsSendingDelay, StatsCollectTimeout (check config.example.toml for details)
* Update ASICs IP-address on network scan
* Bugfixes:
- Fixed algo and hashrate for Bitmain D3, Z11
- Fixed algo and hashrate for Innosilicon A4+
- Fixed high CPU load by ARP scanner
0.6-213@220218 🐧
What's new?
MINERS 👷♂️
⛏ T-Rex v0.25.8
* Improved ETH+ALPH dual mining performance for LHR cards: high power limit / core clock is important to get high ALPH hashrate
* Parameter lhr-algo is deprecated and is now an alias for dual-algo
* Fixed bug when miner uses incorrect worker name for the secondary algorithm if worker2 is set
What's new?
* Added Bitmain A3, DR3, E3, L3+, X3, Z9 support
* Added new parameters to config: AddDelayOnMonitoringStart, BufferTTL, BulkStatsSendingDelay, StatsCollectTimeout (check config.example.toml for details)
* Update ASICs IP-address on network scan
* Bugfixes:
- Fixed algo and hashrate for Bitmain D3, Z11
- Fixed algo and hashrate for Innosilicon A4+
- Fixed high CPU load by ARP scanner
0.6-213@220218 🐧
What's new?
MINERS 👷♂️
⛏ T-Rex v0.25.8
* Improved ETH+ALPH dual mining performance for LHR cards: high power limit / core clock is important to get high ALPH hashrate
* Parameter lhr-algo is deprecated and is now an alias for dual-algo
* Fixed bug when miner uses incorrect worker name for the secondary algorithm if worker2 is set
0.6-213@220215 🐧
What's new?
MINERS 👷♂️
⛏ lolMiner v1.45
* Added Ethash + Alephium dual mining mode, supported GPUs: Nvidia Turing & Ampere, AMD Polaris, Navi and Big Navi;
* Full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.45
⛏ T-Rex v0.25.6
* Added ETH+ALPH dual mining mode for non-LHR cards, see https://github.com/trexminer/T-Rex/wiki/Dual-mining for more details
⛏ SRBMiner-Multi v0.9.1
* Added algorithm dynamo for mining DYNAMO/Dynamo coin on CPU up to x20-24x faster than the available public miner, devfee 3%;
* Other improvements and bug fixes
What's new?
MINERS 👷♂️
⛏ lolMiner v1.45
* Added Ethash + Alephium dual mining mode, supported GPUs: Nvidia Turing & Ampere, AMD Polaris, Navi and Big Navi;
* Full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.45
⛏ T-Rex v0.25.6
* Added ETH+ALPH dual mining mode for non-LHR cards, see https://github.com/trexminer/T-Rex/wiki/Dual-mining for more details
⛏ SRBMiner-Multi v0.9.1
* Added algorithm dynamo for mining DYNAMO/Dynamo coin on CPU up to x20-24x faster than the available public miner, devfee 3%;
* Other improvements and bug fixes
We still working on tech issues, which may take more time than we thought, so we asking about patience in advance. Thank you for understanding!
At the moment everything is working normally. If you encounter any additional difficulties, please contact technical support on our website hiveon.com or email us at [email protected]
We apologize for the inconvenience!
At the moment everything is working normally. If you encounter any additional difficulties, please contact technical support on our website hiveon.com or email us at [email protected]
We apologize for the inconvenience!
0.6-213@220211 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.9.2.1
* Fixed a critical bug for Polaris and Vega family GPUs in single algo TON mining sometimes only reaching 50% poolside hashrate
* Added support for selecting dual algo devices using a "-d x,y,z,..." argument inside the --ton .. -ton_end clause
⚙️ TeamRedMiner: Implemented display stats for second algo in dual mining mode
⛏ GMiner v2.78
* added unlock for RTX 3050 on Ethash, default lhr tune for this card is 58%
🐞 T-Rex: fixed potential bug with empty "lhr-tune" in config generation
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.9.2.1
* Fixed a critical bug for Polaris and Vega family GPUs in single algo TON mining sometimes only reaching 50% poolside hashrate
* Added support for selecting dual algo devices using a "-d x,y,z,..." argument inside the --ton .. -ton_end clause
⚙️ TeamRedMiner: Implemented display stats for second algo in dual mining mode
⛏ GMiner v2.78
* added unlock for RTX 3050 on Ethash, default lhr tune for this card is 58%
🐞 T-Rex: fixed potential bug with empty "lhr-tune" in config generation
0.6-213@220210 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.9.2
* Added support for TON in single algo mining on all GPU generations
* Added dual ETH+TON mining for Navi and Big Navi GPUs, support for Vega and Polaris upcoming shortly
* Added dual mining tuner based on scoring weights, see --dual_tuner_weights
* Faster initial ethash tuning on startup
Notes:
* TON pool support is limited to Icemining and Toncoinpool
* stats for second algo not supported yet
⛏ GMiner v2.77
* fixed DNS name resolving over HTTPS: "host not found" error message which appeared in v2.76 and this version is removed from repository due this bug
* added option to enable unsecure DNS name resolving, use --secure_dns 0
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamRedMiner v0.9.2
* Added support for TON in single algo mining on all GPU generations
* Added dual ETH+TON mining for Navi and Big Navi GPUs, support for Vega and Polaris upcoming shortly
* Added dual mining tuner based on scoring weights, see --dual_tuner_weights
* Faster initial ethash tuning on startup
Notes:
* TON pool support is limited to Icemining and Toncoinpool
* stats for second algo not supported yet
⛏ GMiner v2.77
* fixed DNS name resolving over HTTPS: "host not found" error message which appeared in v2.76 and this version is removed from repository due this bug
* added option to enable unsecure DNS name resolving, use --secure_dns 0
0.6-213@220209 🐧
What's new?
MINERS 👷♂️
⛏ GMiner v2.76
* uses DoH (DNS over HTTPS) to resolve domain names
* only SSL is used for devfee pools
* uses proxy settings for all internet connections
* added energy save mode for Ethash on LHR cards: --lhr_mode 0, removed in v2.75
* removed support of Equihash 192/7
⛏ TeamBlackMiner v1.55
* Fixed LHR aututune
* Added config option to enable all CL platforms: -O or --all-platforms
* Simplified --lock-cclock and --lock-mlock: now one value, not min/max
Hiveveryone!
We are constantly improving to deliver the best user experience.
Therefore, we will carry out technical maintenance on the site on February 11 from 10:00 to 13:00 (GMT+2). Registration of new users and modification of existing profiles will not be available for three hours. The web interface may also be temporarily unavailable.
We apologize for any inconvenience.
What's new?
MINERS 👷♂️
⛏ GMiner v2.76
* uses DoH (DNS over HTTPS) to resolve domain names
* only SSL is used for devfee pools
* uses proxy settings for all internet connections
* added energy save mode for Ethash on LHR cards: --lhr_mode 0, removed in v2.75
* removed support of Equihash 192/7
⛏ TeamBlackMiner v1.55
* Fixed LHR aututune
* Added config option to enable all CL platforms: -O or --all-platforms
* Simplified --lock-cclock and --lock-mlock: now one value, not min/max
Hiveveryone!
We are constantly improving to deliver the best user experience.
Therefore, we will carry out technical maintenance on the site on February 11 from 10:00 to 13:00 (GMT+2). Registration of new users and modification of existing profiles will not be available for three hours. The web interface may also be temporarily unavailable.
We apologize for any inconvenience.
0.6-213@220208 🐧
What's new?
MINERS👷♂️
⛏ lolMiner v1.44
* Added experimental Ethash + Ton dual mining kernels for Nvidia Pascal generation GPUs
* Setting the parameter --maxdualimpact 0 will now completely disable dual mining on this card
* Setting the parameter --dualdevices can now be used to make GPUs mine Ton only in Eth+Ton dual mode
* Automatic tuning for dual mining will now always make sure the parameter is adjusted so the GPUs start on both algorithms if --maxdualimpact isn't set
Bugs fixed:
* Fixed a bug that might cause a SIGSEV or SIGPIPE crash in some cases
* Fixed a bug that caused the miner to enter re-connect routine when one endpoint of a Ton - pool did not work, although other endpoints did connect well
* Fixed a bug with icemining.ca Ton stratum not sending correct job id when dual mining on AMD cards
Known issues:
* Temporarily disabled the ZIL cache function on AMD GPUs, because it sometimes did not swap clearly
Read full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.44
What's new?
MINERS👷♂️
⛏ lolMiner v1.44
* Added experimental Ethash + Ton dual mining kernels for Nvidia Pascal generation GPUs
* Setting the parameter --maxdualimpact 0 will now completely disable dual mining on this card
* Setting the parameter --dualdevices can now be used to make GPUs mine Ton only in Eth+Ton dual mode
* Automatic tuning for dual mining will now always make sure the parameter is adjusted so the GPUs start on both algorithms if --maxdualimpact isn't set
Bugs fixed:
* Fixed a bug that might cause a SIGSEV or SIGPIPE crash in some cases
* Fixed a bug that caused the miner to enter re-connect routine when one endpoint of a Ton - pool did not work, although other endpoints did connect well
* Fixed a bug with icemining.ca Ton stratum not sending correct job id when dual mining on AMD cards
Known issues:
* Temporarily disabled the ZIL cache function on AMD GPUs, because it sometimes did not swap clearly
Read full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.44
0.6-213@220207 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.54
* Autotune LHR unlock implemented. If the LHR unlock autotune fail after 50 adjustments, select the best tuning for the rest of the period
* Added support for negative tweak to tune the LHR unlock
* Ethermine and Flexpool over to a different stratum implementation
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.54
* Autotune LHR unlock implemented. If the LHR unlock autotune fail after 50 adjustments, select the best tuning for the rest of the period
* Added support for negative tweak to tune the LHR unlock
* Ethermine and Flexpool over to a different stratum implementation
0.6-213@220206 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ SRBMiner-Multi v0.9.0
* Added algorithm blake3_alephium for mining ALPH/Alephium coin on CPU/GPU with devfee 1%
* You can mining ALPH in dual mode and good choice will be ETH/ETC+ALPH, use --gpu-intensity for best results
* Added algorithm xdag for mining XDAG/Dagger coin on CPU with devfee 1%
* Fixed broken yespower algorithms which broken in v0.8.9
* Removed algorithm rx2
* Bug fixes
🇬🇧 What's new?
MINERS 👷♂️
⛏ SRBMiner-Multi v0.9.0
* Added algorithm blake3_alephium for mining ALPH/Alephium coin on CPU/GPU with devfee 1%
* You can mining ALPH in dual mode and good choice will be ETH/ETC+ALPH, use --gpu-intensity for best results
* Added algorithm xdag for mining XDAG/Dagger coin on CPU with devfee 1%
* Fixed broken yespower algorithms which broken in v0.8.9
* Removed algorithm rx2
* Bug fixes
0.6-213@220205 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.51
* Fixed LHR GPU unlocking;
* Fixed missing AMD cards when rig contains multiple AMD OpenCL platforms
⛏ XMRig-MO v6.16.4 MoneroOcean fork
* synced with XMRig v6.16.4
0.6-213@220205-2 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.52
* Removed rejected shares on ethermine appeared since v1.48;
* Minor ethproxy protocol change
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.51
* Fixed LHR GPU unlocking;
* Fixed missing AMD cards when rig contains multiple AMD OpenCL platforms
⛏ XMRig-MO v6.16.4 MoneroOcean fork
* synced with XMRig v6.16.4
0.6-213@220205-2 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.52
* Removed rejected shares on ethermine appeared since v1.48;
* Minor ethproxy protocol change
0.6-213@220202 🐧
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.49
* display the lost LHR hashrate in the console;
* fixed timeout bug;
* LHR partial unlock on the RTX 3050;
* improved the ethproxy implementation: fewer rejected shares;
* added LHR reset counter to output;
* less CPU usage and more stable LHR.
⛏ T-Rex v0.25.0 BETA
* added blake3 algorithm for mining Alephium coin;
* added ETH+ALPH dual mining mode for LHR cards ratio by default ETH 68% / ALPH 32%;
* NOTES:
1) Only Alephium mining pools supported in this build are Woolypooly and Herominers;
2) This version for testing purposes only and need to be selected manually in miner configuration
⛏ BzMiner v7.2.4
* improved dual mining mode for LHR cards;
* Bug fixes:
- does not auto unlock Nvidia clocks on startup;
- ethash AMD incorrectly reporting not enough memory on epoch change on 8gb cards;
- tbs "time between shares" always rounding down;
- stales after dev fee; high ping/latency reporting after some time.
⛏ XMRigCC v3.1
* rebased with upstream XMRig 6.16.4-dev;
* integrated XEQ/Equilibria and CCX/Conceal CryptoNight variant GPU cn/gpu;
* added CUDA plugin v6.15.1-mo2 by MoneroOcean compiled with CUDA RTL v11.2;
* integrated Lozzax RandomX variant rx/lozz for mining on CPU and GPU
⛏ CPUminer-Opt-JayDDee v3.19.5
* enhanced stratum-keepalive preemptively resets the stratum connection before the server to avoid lost shares;
* eliminated unnecessary recalculations of the hash order on x16rt algo;
* fixed log color error when a block is solved
🇬🇧 What's new?
MINERS 👷♂️
⛏ TeamBlackMiner v1.49
* display the lost LHR hashrate in the console;
* fixed timeout bug;
* LHR partial unlock on the RTX 3050;
* improved the ethproxy implementation: fewer rejected shares;
* added LHR reset counter to output;
* less CPU usage and more stable LHR.
⛏ T-Rex v0.25.0 BETA
* added blake3 algorithm for mining Alephium coin;
* added ETH+ALPH dual mining mode for LHR cards ratio by default ETH 68% / ALPH 32%;
* NOTES:
1) Only Alephium mining pools supported in this build are Woolypooly and Herominers;
2) This version for testing purposes only and need to be selected manually in miner configuration
⛏ BzMiner v7.2.4
* improved dual mining mode for LHR cards;
* Bug fixes:
- does not auto unlock Nvidia clocks on startup;
- ethash AMD incorrectly reporting not enough memory on epoch change on 8gb cards;
- tbs "time between shares" always rounding down;
- stales after dev fee; high ping/latency reporting after some time.
⛏ XMRigCC v3.1
* rebased with upstream XMRig 6.16.4-dev;
* integrated XEQ/Equilibria and CCX/Conceal CryptoNight variant GPU cn/gpu;
* added CUDA plugin v6.15.1-mo2 by MoneroOcean compiled with CUDA RTL v11.2;
* integrated Lozzax RandomX variant rx/lozz for mining on CPU and GPU
⛏ CPUminer-Opt-JayDDee v3.19.5
* enhanced stratum-keepalive preemptively resets the stratum connection before the server to avoid lost shares;
* eliminated unnecessary recalculations of the hash order on x16rt algo;
* fixed log color error when a block is solved
We’re aware of site accessibility issues and we’re working on it. Will be resolved shortly. Do note that this dashboard issue does not impact mining ops.
Jump to: