Hum, palgin hasn't posted anything since the 30th december 2017, weird, hope all is good for him 
His wife is probably doing what my is doing..."Get off the dang computer and pay attention to me"
Topic: hsrminer - Nvidia mining software for various algos by palgin&alexkap - page 23. (Read 30791 times)
January 17, 2018, 07:47:22 AM
His wife is probably doing what my is doing..."Get off the dang computer and pay attention to me"
January 17, 2018, 02:54:38 AM
A word of caution for those of us who like getting the most out of our hardware (and software). Make sure you set appropriate power limits with Afterburner. Set it lower than max for those cheaper GPUs.
I have killed yet another Gigabyte today. This time it happened while I was tweaking intensity and MSI Afterburner was not setting my power limit on this 1060 3GB because it decided not to start after a reboot. As usual, the power circuit has burned out because hsrminer does not limit the power by default. This makes the total of five Gigabytes killed in action out of about sixty with super cool ccminer forks since August of last year. The biggest death toll for me still holds Skunk algo with its spiky load. It took three 1070 ITX boards with it before I figured out what was killing them. The worst one was 1080ti last week. Apparently it cant handle 110% PL with spiky loads. All casualties are Gigabytes and not a single EVGA. I'm using super stable power supplies, enjoying low 15 deg C ambient, 40-50C chip temps across the board. It's just the weakness of the circuit design and probably some faulty components to boot.
-SCSI
I have killed yet another Gigabyte today. This time it happened while I was tweaking intensity and MSI Afterburner was not setting my power limit on this 1060 3GB because it decided not to start after a reboot. As usual, the power circuit has burned out because hsrminer does not limit the power by default. This makes the total of five Gigabytes killed in action out of about sixty with super cool ccminer forks since August of last year. The biggest death toll for me still holds Skunk algo with its spiky load. It took three 1070 ITX boards with it before I figured out what was killing them. The worst one was 1080ti last week. Apparently it cant handle 110% PL with spiky loads. All casualties are Gigabytes and not a single EVGA. I'm using super stable power supplies, enjoying low 15 deg C ambient, 40-50C chip temps across the board. It's just the weakness of the circuit design and probably some faulty components to boot.
-SCSI
January 17, 2018, 02:17:44 AM
Hum, palgin hasn't posted anything since the 30th december 2017, weird, hope all is good for him
January 16, 2018, 08:25:36 PM
please support api.
January 16, 2018, 08:17:48 PM
He was asking for a code to auto restart miner when it crashes. When hsrminer crashes:
when miner crashes with werfault windows it mean some gfx card(s) is high overclocked and need to down overclocking. werfault can be handled via bat file. and werfault can be disabled.
January 16, 2018, 04:22:20 PM
Anyone know what means "GTX 1070 show flags: 0, 1, 0."?
Why some users get 0, 0, 0?
Why some users get 0, 0, 0?
I'm reaching here
--texture-cache comma separated list of flags (0/1/2) specifying
which of the CUDA devices shall use the texture
cache for mining.
January 16, 2018, 03:17:58 PM
Anyone know what means "GTX 1070 show flags: 0, 1, 0."?
Why some users get 0, 0, 0?
Why some users get 0, 0, 0?
January 16, 2018, 01:12:18 PM
Hello there, noob questions here!
2) Can i put some code in my .bat to auto reboot when crash?
2) Can i put some code in my .bat to auto reboot when crash?
You can, but you need to use AutoIt for example. I will post code example in my topic tomorrow, check link from my signature.
:reboot
hsrminer_neoscrypt -o stratum+tcp://url -u wallet -p blah
timeout /t 5 /nobreak
goto restart
He was asking for a code to auto restart miner when it crashes. When hsrminer crashes:
5. If program terminated, windows appear, with suggestion to End Task... not good for looping.
You can probably handle this in .bat, but it's way easier to use more advanced tool like AutoIt.
January 16, 2018, 01:02:21 PM
Hello there, noob questions here!
2) Can i put some code in my .bat to auto reboot when crash?
2) Can i put some code in my .bat to auto reboot when crash?
You can, but you need to use AutoIt for example. I will post code example in my topic tomorrow, check link from my signature.
:reboot
hsrminer_neoscrypt -o stratum+tcp://url -u wallet -p blah
timeout /t 5 /nobreak
goto restart
January 16, 2018, 12:30:58 PM
Hello there, noob questions here!
2) Can i put some code in my .bat to auto reboot when crash?
2) Can i put some code in my .bat to auto reboot when crash?
You can, but you need to use AutoIt for example. I will post code example in my topic tomorrow, check link from my signature.
January 16, 2018, 12:17:47 PM
1122kh with Asus Dual GTX1070 8GB - no oc - 130w
January 16, 2018, 12:08:26 PM
My MSI burner set my rig to 75 power limit
But miner shows on 1060 --around 90
1070-- around 105(but msi still showing 75-80)
what is correct ?
Can i set power limit inside miner(bat file)?
thanks
MSI AF power limit work with %, not with watt`s.
Got you
so to use less power i need do on AF power to 50% XD
but anyways can i do in bat file on nvidia cards power limit set ups ?
January 16, 2018, 12:02:26 PM
Hello there, noob questions here!
1) My GTX 1070 show flags: 0, 1, 0. Whats mean this flags?
2) Can i put some code in my .bat to auto reboot when crash?
My stats:
CCminer - PL 100% - +150/+500 = ~965kH/s
HSRminer - PL 100% - non-OC = ~1230kH/s
Change clock e memory speed don't change much on kH/s.
VGA: GIGABYTE GEFORCE GTX 1070 G1 Gaming 8G
1) My GTX 1070 show flags: 0, 1, 0. Whats mean this flags?
2) Can i put some code in my .bat to auto reboot when crash?
My stats:
CCminer - PL 100% - +150/+500 = ~965kH/s
HSRminer - PL 100% - non-OC = ~1230kH/s
Change clock e memory speed don't change much on kH/s.
VGA: GIGABYTE GEFORCE GTX 1070 G1 Gaming 8G
January 16, 2018, 11:38:28 AM
I just switched back to KlausTT 8.18 and i get more average hashrate as shown on the pool now.
Ditching untill new version
Ditching untill new version
Yup, I can confirm that KlausT miner has higher hashrate on neoscrypt and no fee.
For 1050/1060/1070 series KlausT is better, this miner is better for 1080 series
i don't think soo, my 70ti have 1400hs (160w) using palgin work's
for now klaust has been defeated, but i only test for some hour
will do some test, maybe in saturday and sunday
cheers
exactly ... ive got around 1400 per 1070ti with hsr miner on 160w too and around 1100 on 1070 on 120w
January 16, 2018, 11:07:30 AM
My MSI burner set my rig to 75 power limit
But miner shows on 1060 --around 90
1070-- around 105(but msi still showing 75-80)
what is correct ?
Can i set power limit inside miner(bat file)?
thanks
MSI AF power limit work with %, not with watt`s.
January 16, 2018, 10:29:49 AM
My MSI burner set my rig to 75 power limit
But miner shows on 1060 --around 90
1070-- around 105(but msi still showing 75-80)
what is correct ?
Can i set power limit inside miner(bat file)?
thanks
January 16, 2018, 06:37:21 AM
Hi, I have a strange problem with hsr. It throws at me two different errors. 'GPU0 - Invalid argument' and 'Api not available'. I am running 750 Ti. Anybody knows what could be the problem?
https://preview.ibb.co/fdVZE6/gingevitys.png
https://preview.ibb.co/fdVZE6/gingevitys.png
January 16, 2018, 05:43:03 AM
is there any linux binary (Ubuntu 17.x/Cuda 9.1x) to test or source?
January 16, 2018, 05:23:25 AM
6 major cons:
1. No options like -r and -R (similar to ccminer), can't loop for failover, etc
2. No API.
3. After startup I see per-card hashrate... but some time after it not displaying anymore
4. Sometimes it just hangs after swith to dev fee mining.
5. If program terminated, windows appear, with suggestion to End Task... not good for looping.
6. Build f....g linux version!
1. No options like -r and -R (similar to ccminer), can't loop for failover, etc
2. No API.
3. After startup I see per-card hashrate... but some time after it not displaying anymore
4. Sometimes it just hangs after swith to dev fee mining.
5. If program terminated, windows appear, with suggestion to End Task... not good for looping.
6. Build f....g linux version!
Check this out https://bitcointalksearch.org/topic/hsrminer-neoscrypt-fork-by-justaminer-high-hashrate-api-all-gpus-supported-2765610, some of your problems are solved
Be carefull with this, new account, he offer closed code miner fork.....
January 16, 2018, 05:21:02 AM
6 major cons:
1. No options like -r and -R (similar to ccminer), can't loop for failover, etc
2. No API.
3. After startup I see per-card hashrate... but some time after it not displaying anymore
4. Sometimes it just hangs after swith to dev fee mining.
5. If program terminated, windows appear, with suggestion to End Task... not good for looping.
6. Build f....g linux version!
1. No options like -r and -R (similar to ccminer), can't loop for failover, etc
2. No API.
3. After startup I see per-card hashrate... but some time after it not displaying anymore
4. Sometimes it just hangs after swith to dev fee mining.
5. If program terminated, windows appear, with suggestion to End Task... not good for looping.
6. Build f....g linux version!
Check this out https://bitcointalksearch.org/topic/hsrminer-neoscrypt-fork-by-justaminer-high-hashrate-api-all-gpus-supported-2765610, some of your problems are solved
Be carefull with this, new account, he offer closed code miner fork.....
Jump to: