Innosilicon releases A9 Zmaster 50ksol/s Equihash miner at 620W - page 37.

EK701

newbie

Activity: 25

Merit: 0

Quote from: ithaclies on July 20, 2018, 12:55:17 PM

Quote from: Longenecker on July 20, 2018, 12:11:17 PM

Quote from: Andartis on July 20, 2018, 11:41:31 AM

You can still DL the older FW if you know the exact filename:
http://www.innosilicon.com.cn/download/b29+_20180706_042116.swu e.g.
Can anybody post the FW name of 07/18? Thx

Thanks, did not know that. The 7/18 file name is: b29+_20180718_055037.swu

However, 7/18 firmware caused me the following issues: very slow to reach peak hash rate (~30 min), and caused many HW errors. 7/20 (7/06?) firmware resolved both of these issues for me.

Are you getting the full 50k hashrate?

I had the same issues with the 7/18 firmware. I'm getting ~50k on 2 A9 and only ~40k one 1. I've tried everything I can think of to get the hash rate up on the slow one, but nothing seems to make a difference.

Longenecker

full member

Activity: 226

Merit: 100

Quote from: ithaclies on July 20, 2018, 12:55:17 PM

Quote from: Longenecker on July 20, 2018, 12:11:17 PM

Quote from: Andartis on July 20, 2018, 11:41:31 AM

You can still DL the older FW if you know the exact filename:
http://www.innosilicon.com.cn/download/b29+_20180706_042116.swu e.g.
Can anybody post the FW name of 07/18? Thx

Thanks, did not know that. The 7/18 file name is: b29+_20180718_055037.swu

However, 7/18 firmware caused me the following issues: very slow to reach peak hash rate (~30 min), and caused many HW errors. 7/20 (7/06?) firmware resolved both of these issues for me.

Are you getting the full 50k hashrate?

Yes, I am averaging a little over 50k (~53k) w/ balanced profile setting.

xpulse

newbie

Activity: 141

Merit: 0

Quote from: xpulse on July 20, 2018, 05:55:08 AM

Quote from: xpulse on July 18, 2018, 09:23:08 PM

Quote from: EK701 on July 18, 2018, 08:36:40 PM

Quote from: basilp on July 18, 2018, 08:29:59 PM

Looks like there's a new firmware on their download page. 0718 Perhaps it will have performance improvements

http://www.innosilicon.com/html/support_en/download.html

I tried it earlier today for about 6 hours. No obvious improvements and in fact, the hash rate was very slow to ramp up - taking over an hour to plateau. I went back to the 7/6 firmware.

Running a test for new firmware on Nicehash and Flypool. At this moment looks better than 6/30 and 7/6... will provide updates in 12 hours.

So tested ~24 hours. Flypool average hashrate 32-33.8 - BAD, nicehash slightly better than 36, but still not even close to 45-50

Compare with all firmware I have in my history, A9_20180630_012251.swu - best one.

koy168hk

newbie

Activity: 8

Merit: 0

Is anyone try the firmware of 20July?

i am currently using the firmware of 6July.

Actually my current firmware got no problems, got 100% accept rate in zhash and 98~100% accept rate at suprnove.

So what is the major change of 20July version? Do you suggest upgrade it and WHY?

thanks!

ithaclies

newbie

Activity: 3

Merit: 0

Quote from: Longenecker on July 20, 2018, 12:11:17 PM

Quote from: Andartis on July 20, 2018, 11:41:31 AM

You can still DL the older FW if you know the exact filename:
http://www.innosilicon.com.cn/download/b29+_20180706_042116.swu e.g.
Can anybody post the FW name of 07/18? Thx

Thanks, did not know that. The 7/18 file name is: b29+_20180718_055037.swu

However, 7/18 firmware caused me the following issues: very slow to reach peak hash rate (~30 min), and caused many HW errors. 7/20 (7/06?) firmware resolved both of these issues for me.

Are you getting the full 50k hashrate?

Longenecker

full member

Activity: 226

Merit: 100

Quote from: Andartis on July 20, 2018, 11:41:31 AM

You can still DL the older FW if you know the exact filename:
http://www.innosilicon.com.cn/download/b29+_20180706_042116.swu e.g.
Can anybody post the FW name of 07/18? Thx

Thanks, did not know that. The 7/18 file name is: b29+_20180718_055037.swu

However, 7/18 firmware caused me the following issues: very slow to reach peak hash rate (~30 min), and caused many HW errors. 7/20 (7/06?) firmware resolved both of these issues for me.

Andartis

jr. member

Activity: 306

Merit: 7

You can still DL the older FW if you know the exact filename:
http://www.innosilicon.com.cn/download/b29+_20180706_042116.swu e.g.
Can anybody post the FW name of 07/18? Thx

Longenecker

full member

Activity: 226

Merit: 100

Quote from: EK701 on July 20, 2018, 11:02:00 AM

Quote from: Longenecker on July 20, 2018, 08:41:23 AM

Weird, I just checked and I'm also having the same problem. My previous installed firmware was from 07/18. But after installing today's 07/20 firmware, it is now saying I have 07/06 firmware installed... I'm guessing they will push out a new firmware to fix this soon.

I'm seeing the same thing. Installed the 7/20 firmware, but the system overview shows it as the 7/6 firmware.

And when you go to "Check now" for Latest Firmware... it will show that you are out of date (with 7/6 firmware).

EK701

newbie

Activity: 25

Merit: 0

Quote from: Longenecker on July 20, 2018, 08:41:23 AM

Weird, I just checked and I'm also having the same problem. My previous installed firmware was from 07/18. But after installing today's 07/20 firmware, it is now saying I have 07/06 firmware installed... I'm guessing they will push out a new firmware to fix this soon.

I'm seeing the same thing. Installed the 7/20 firmware, but the system overview shows it as the 7/6 firmware.

Longenecker

full member

Activity: 226

Merit: 100

Quote from: Andartis on July 20, 2018, 10:05:33 AM

Quote from: Longenecker on July 20, 2018, 08:41:23 AM

Quote from: Andartis on July 20, 2018, 08:32:22 AM

Quote from: Longenecker on July 20, 2018, 08:30:59 AM

Quote from: Longenecker on July 19, 2018, 11:50:21 PM

How are people's HW error rates? What is considered normal? Looking at Innosilicon's Miner Status page, my HW #'s seem to be around 5-10% of my "Accepted" #.

I am running on Balanced performance profile, and have latest firmware installed. If this is not normal are there any suggestions to lower my HW errors? Could it possibly vary based on the pool I am mining on (currently on Flypool)? Thanks in advance.

Just FYI, today's 7/20 firmware release seems to have fixed all my HW error issues. I am not getting them anymore.

I could not manage to update the firmware. After correct seeming update it reboots and has still old firmware.

Weird, I just checked and I'm also having the same problem. My previous installed firmware was from 07/18. But after installing today's 07/20 firmware, it is now saying I have 07/06 firmware installed... I'm guessing they will push out a new firmware to fix this soon.

I never had a firmware from 07/18... Did it come with the new batch?

7/18 firmware was available on their support page: http://www.innosilicon.com/html/support_en/download.html

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: Longenecker on July 20, 2018, 08:41:23 AM

Quote from: Andartis on July 20, 2018, 08:32:22 AM

Quote from: Longenecker on July 20, 2018, 08:30:59 AM

Quote from: Longenecker on July 19, 2018, 11:50:21 PM

How are people's HW error rates? What is considered normal? Looking at Innosilicon's Miner Status page, my HW #'s seem to be around 5-10% of my "Accepted" #.

I am running on Balanced performance profile, and have latest firmware installed. If this is not normal are there any suggestions to lower my HW errors? Could it possibly vary based on the pool I am mining on (currently on Flypool)? Thanks in advance.

Just FYI, today's 7/20 firmware release seems to have fixed all my HW error issues. I am not getting them anymore.

I could not manage to update the firmware. After correct seeming update it reboots and has still old firmware.

Weird, I just checked and I'm also having the same problem. My previous installed firmware was from 07/18. But after installing today's 07/20 firmware, it is now saying I have 07/06 firmware installed... I'm guessing they will push out a new firmware to fix this soon.

I never had a firmware from 07/18... Did it come with the new batch?

Longenecker

full member

Activity: 226

Merit: 100

Quote from: Andartis on July 20, 2018, 08:32:22 AM

Quote from: Longenecker on July 20, 2018, 08:30:59 AM

Quote from: Longenecker on July 19, 2018, 11:50:21 PM

How are people's HW error rates? What is considered normal? Looking at Innosilicon's Miner Status page, my HW #'s seem to be around 5-10% of my "Accepted" #.

I am running on Balanced performance profile, and have latest firmware installed. If this is not normal are there any suggestions to lower my HW errors? Could it possibly vary based on the pool I am mining on (currently on Flypool)? Thanks in advance.

Just FYI, today's 7/20 firmware release seems to have fixed all my HW error issues. I am not getting them anymore.

I could not manage to update the firmware. After correct seeming update it reboots and has still old firmware.

Weird, I just checked and I'm also having the same problem. My previous installed firmware was from 07/18. But after installing today's 07/20 firmware, it is now saying I have 07/06 firmware installed... I'm guessing they will push out a new firmware to fix this soon.

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: Longenecker on July 20, 2018, 08:30:59 AM

Quote from: Longenecker on July 19, 2018, 11:50:21 PM

How are people's HW error rates? What is considered normal? Looking at Innosilicon's Miner Status page, my HW #'s seem to be around 5-10% of my "Accepted" #.

I am running on Balanced performance profile, and have latest firmware installed. If this is not normal are there any suggestions to lower my HW errors? Could it possibly vary based on the pool I am mining on (currently on Flypool)? Thanks in advance.

Just FYI, today's 7/20 firmware release seems to have fixed all my HW error issues. I am not getting them anymore.

I could not manage to update the firmware. After correct seeming update it reboots and has still old firmware.

Longenecker

full member

Activity: 226

Merit: 100

Quote from: Longenecker on July 19, 2018, 11:50:21 PM

How are people's HW error rates? What is considered normal? Looking at Innosilicon's Miner Status page, my HW #'s seem to be around 5-10% of my "Accepted" #.

I am running on Balanced performance profile, and have latest firmware installed. If this is not normal are there any suggestions to lower my HW errors? Could it possibly vary based on the pool I am mining on (currently on Flypool)? Thanks in advance.

Just FYI, today's 7/20 firmware release seems to have fixed all my HW error issues. I am not getting them anymore.

preda

sr. member

Activity: 756

Merit: 250

all equi coins preparing for fork! asic is enemy of mining!!!

xpulse

newbie

Activity: 141

Merit: 0

Quote from: xpulse on July 18, 2018, 09:23:08 PM

Quote from: EK701 on July 18, 2018, 08:36:40 PM

Quote from: basilp on July 18, 2018, 08:29:59 PM

Looks like there's a new firmware on their download page. 0718 Perhaps it will have performance improvements

http://www.innosilicon.com/html/support_en/download.html

I tried it earlier today for about 6 hours. No obvious improvements and in fact, the hash rate was very slow to ramp up - taking over an hour to plateau. I went back to the 7/6 firmware.

Running a test for new firmware on Nicehash and Flypool. At this moment looks better than 6/30 and 7/6... will provide updates in 12 hours.

So tested ~24 hours. Flypool average hashrate 32-33.8 - BAD, nicehash slightly better than 36, but still not even close to 45-50

MZ4

member

Activity: 118

Merit: 86

Quote from: Gedaskv on July 20, 2018, 03:45:04 AM

5 units quite big investment. Do they offer 1 for the same price?

No for 5 of them is that price.

EK701

newbie

Activity: 25

Merit: 0

Quote from: basilp on July 20, 2018, 01:45:46 AM

What's the command line you're using.

I'm doing ./hashcat64.bin -1 abcdefghijklmnopqrstuvwxyz0123456789 -d 1 -a 3 -m 1800 example.hash ?1?1?1?1?1

..oh looks like it's working now..

hashcat -m 1800 -a 3 --increment -O --session 8char --outfile ~/hashcat.txt ~/hash.txt ?a?a?a?a?a?a?a?a

Gedaskv

newbie

Activity: 45

Merit: 0

5 units quite big investment. Do they offer 1 for the same price?

MZ4

member

Activity: 118

Merit: 86

Quote from: elgoog on July 19, 2018, 07:37:49 PM

Quote from: MZ4 on July 19, 2018, 03:25:30 PM

I have a good offer for some A9's.
Does it worth investing in 5 A9's now?
I have read about the small problems above and I am concerned about ordering them.

How much is it per unit?
It is very important because Bitmain and Innosilicon will ship a lot of equihash miner in the end of August ~ September.
And, Innosilicon may start 1 buy 2 free A9 in September.

5800 Euros is the price including shipment and PSU.
Z9 minis delivery and z9 September troubles me also. Do you think it worths it?

Topic: Innosilicon releases A9 Zmaster 50ksol/s Equihash miner at 620W - page 37. (Read 45686 times)