If you are downloading core 0.13.0 -- bitcoin.org is issuing warnings regarding their binaries -- so be careful...
Link: http://www.businessinsider.com/bitcoin-org-warns-potential-attack-state-sponsored-hackers-binaries-2016-8?r=UK&IR=T
Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1271. (Read 5352429 times)
August 18, 2016, 07:26:11 AM
Wolfen: I had a similar situation with my Trezor not matching the blockchain. I chalked it up to their hinky chrome app plug in -- but, not sure. I manually drained the wallet address -- and, went to keep key.
If you are downloading core 0.13.0 -- bitcoin.org is issuing warnings regarding their binaries -- so be careful...
Link: http://www.businessinsider.com/bitcoin-org-warns-potential-attack-state-sponsored-hackers-binaries-2016-8?r=UK&IR=T
If you are downloading core 0.13.0 -- bitcoin.org is issuing warnings regarding their binaries -- so be careful...
Link: http://www.businessinsider.com/bitcoin-org-warns-potential-attack-state-sponsored-hackers-binaries-2016-8?r=UK&IR=T
August 18, 2016, 06:59:27 AM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
Sent 2btc to coinbase, 4 BTC went to change address. 1btc stayed in main address.
Keepkey now says 4btc which is the amount in the change address.
The other 1btc in the keep key main address on the Blockchain is not showing on the keepkey
How much did you put in the Keepkey to start with? 6 or7 BTC?
Installed Bitcoin core, downloading the Blockchain. Will give that wallet a spin.
I use the Keepkey also...I have found it to be very precise all the way to the 8th digit. No problems at all. Maybe you should contact their customer support.
Do you experience lag in loading transaction history or sending BTC?
I typically use it to just store extra BTC and don't have many transactions with it. I did send 1.13 BTC to Toomim Brothers on July 20th and there were no delays...and no discrepancies.
August 18, 2016, 06:54:24 AM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
Sent 2btc to coinbase, 4 BTC went to change address. 1btc stayed in main address.
Keepkey now says 4btc which is the amount in the change address.
The other 1btc in the keep key main address on the Blockchain is not showing on the keepkey
How much did you put in the Keepkey to start with? 6 or7 BTC?
Installed Bitcoin core, downloading the Blockchain. Will give that wallet a spin.
I use the Keepkey also...I have found it to be very precise all the way to the 8th digit. No problems at all. Maybe you should contact their customer support.
Do you experience lag in loading transaction history or sending BTC?
August 18, 2016, 06:51:31 AM
Quote
Must have been 6, Blockchain won't match the keepkey
Installed Bitcoin core, downloading the Blockchain. Will give that wallet a spin.
Installed Bitcoin core, downloading the Blockchain. Will give that wallet a spin.
I've been using a keepkey, it usually works very well but recently i've had big issues with my transaction history syncing incorrectly. The biggest issue of all is that it took about 5 hours to send BTC to bitmain for my latest S9 purchase. I contacted support via email, send them debugging logs etc, they replicated the problem and are working on resolving it. If you continue to have issues, contact them, i've done it twice and they are helpful. Generally respond in less than 24 hours. I have read that the issue you're experiencing has happened before and they know how to resolve it.
August 18, 2016, 06:33:47 AM
Quick question guys past couple of days been trying to login to the website and getting "Too many failures, come back later" on themain page without me trying to login
its been going away and coming back... Am I the only one getting this error?
sweet
its been going away and coming back... Am I the only one getting this error?
sweet
August 17, 2016, 09:59:11 PM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
Sent 2btc to coinbase, 4 BTC went to change address. 1btc stayed in main address.
Keepkey now says 4btc which is the amount in the change address.
The other 1btc in the keep key main address on the Blockchain is not showing on the keepkey
How much did you put in the Keepkey to start with? 6 or7 BTC?
Installed Bitcoin core, downloading the Blockchain. Will give that wallet a spin.
I use the Keepkey also...I have found it to be very precise all the way to the 8th digit. No problems at all. Maybe you should contact their customer support.
August 17, 2016, 09:59:05 PM
CK's proxy won't work on a PI. I tried it a while ago. Had to put it on one of my Centos machines instead.
ITs been awhile maybe I should see if will work on the new ones. Last I heard the 64 bit support on PI was not complete so it won't compile.
ITs been awhile maybe I should see if will work on the new ones. Last I heard the 64 bit support on PI was not complete so it won't compile.
Interesting. Good to know.
Seems odd though because I assume that if ck wrote it the proxy would be very frugal resource wise. If there's a compile problem it can probably be worked around.
Not that larger farms would want to put a lot of miners behind a $35 RPi anyway. For me I won't have enough miners to be a concern. A cheap RPi is just what the doctor ordered.
August 17, 2016, 09:19:46 PM
CK's proxy won't work on a PI. I tried it a while ago. Had to put it on one of my Centos machines instead.
ITs been awhile maybe I should see if will work on the new ones. Last I heard the 64 bit support on PI was not complete so it won't compile.
ITs been awhile maybe I should see if will work on the new ones. Last I heard the 64 bit support on PI was not complete so it won't compile.
August 17, 2016, 08:54:54 PM
Can anyone point me to a link to 'splain to my addled senior brain how to setup an SD card for the RPi2 (Avalon6) using Ubuntu? Everything I find is pointed to Winbloze.
Thank you...
Thank you...
https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
Wow...quick. Thank you again. Shows ya how old I am...I'm quite aware of RPi, it's etiology, etc. but just never had occasion to do anything with one. Also dunno why I didn't come across the .org site in searches...more French press (or PepsiMax), I guess.
That should do it. Mine on!
Sounds like that guide is what you need. But if you get into trouble, feel free to PM me. I've set up a number of RPi's for mining purposes.
In fact last weekend I set up a Stratehm stratum-proxy on a Raspian Jessie lite image. I used DaemonTools to turn it into a service and to manage log rotation. And I mapped all logging to a RAM disk via log2ram to minimize SD card wear and tear.
As an aside, I really like the Stratehm stratum-proxy. It seems well behaved and has a convenient web GUI with pretty graphs (and configurable period and depth for performance tuning). But I'm currently only running one S9 behind it (adding a second S9 B10 that I just bought). Not clear how a Java based proxy running on a resource limited platform like an RPi would fair with a larger farm.
If I had a lot more miners, I'd probably use CK's proxy. But for my limited use case, Stratehm works fine.
August 17, 2016, 08:43:11 PM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
Sent 2btc to coinbase, 4 BTC went to change address. 1btc stayed in main address.
Keepkey now says 4btc which is the amount in the change address.
The other 1btc in the keep key main address on the Blockchain is not showing on the keepkey
How much did you put in the Keepkey to start with? 6 or7 BTC?
Installed Bitcoin core, downloading the Blockchain. Will give that wallet a spin.
August 17, 2016, 08:04:54 PM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
Sent 2btc to coinbase, 4 BTC went to change address. 1btc stayed in main address.
Keepkey now says 4btc which is the amount in the change address.
The other 1btc in the keep key main address on the Blockchain is not showing on the keepkey
How much did you put in the Keepkey to start with? 6 or7 BTC?
August 17, 2016, 07:52:50 PM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
Sent 2btc to coinbase, 4 BTC went to change address. 1btc stayed in main address.
Keepkey now says 4btc which is the amount in the change address.
The other 1btc in the keep key main address on the Blockchain is not showing on the keepkey
August 17, 2016, 07:21:46 PM
Sorry for OT,
But has anyone else tried to use the micro sd on the S9 only to discover it's only a slot with nothing behind it? Man, I'm PO'd!
But has anyone else tried to use the micro sd on the S9 only to discover it's only a slot with nothing behind it? Man, I'm PO'd!
August 17, 2016, 07:06:49 PM
ouch that always sucks , back when i had bfl 60's i had removed the end plates to quiet them down , stuck a finger in the fan by accident boy did that hurt and left a nice deep cut
We have similar issues here with geckos...they're endemic, and love the heat etc. of electronics. I use a square of fiberglass screen held in place by running the corner fan screws through the fabric...no glue or anything. Works for geckos and, I imagine, for small fingers.
oh man.... that's bad... those delta fans, I think their blades are made of steel... no kids should be even near 10metres off these miners.
and it spins very fast, it could be worst, but gladly she's ok playing again all over the house.
She uses the hot air from the Sp20 to dry her toys haha.
The ant is off right now, tomorrow I will put it on a higher shelf.
Mine on folks!
August 17, 2016, 06:41:54 PM
off topic, using keepkey
Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
This is normal the extra BTC was sent to a change address.Does this thing tumble?
I sent 2 btc to coinbase and the entire contents were sent, 2btc to coinbase and 4 btc to another btc address( I guess another keep key one)
keepkey says the right final balance but the blockchain has the remainder in two different addresses, one the main original one.
Makes it a pain to see the total on the blockchain.
2btc sent to coinbase
4btc sent to keepkey change address.
.003 transaction fee
ouch.
Is the amount showing in your Keepkey device correct? I think what you are seeing is the BTC trail that led up to all of the transactions that you've accumulated to get to the 2BTC.
August 17, 2016, 06:20:24 PM
Can anyone point me to a link to 'splain to my addled senior brain how to setup an SD card for the RPi2 (Avalon6) using Ubuntu? Everything I find is pointed to Winbloze.
Thank you...
Thank you...
https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
Wow...quick. Thank you again. Shows ya how old I am...I'm quite aware of RPi, it's etiology, etc. but just never had occasion to do anything with one. Also dunno why I didn't come across the .org site in searches...more French press (or PepsiMax), I guess.
That should do it. Mine on!
I was out and working on my phone or I would have put more detail for you. From your past posts I figured that would be enough for you to know what to do anyways
Thats the main site for the foundation so lots of documentation on there.
August 17, 2016, 05:41:15 PM
Can anyone point me to a link to 'splain to my addled senior brain how to setup an SD card for the RPi2 (Avalon6) using Ubuntu? Everything I find is pointed to Winbloze.
Thank you...
Thank you...
https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
Wow...quick. Thank you again. Shows ya how old I am...I'm quite aware of RPi, it's etiology, etc. but just never had occasion to do anything with one. Also dunno why I didn't come across the .org site in searches...more French press (or PepsiMax), I guess.
That should do it. Mine on!
August 17, 2016, 05:33:35 PM
Can anyone point me to a link to 'splain to my addled senior brain how to setup an SD card for the RPi2 (Avalon6) using Ubuntu? Everything I find is pointed to Winbloze.
Thank you...
Thank you...
https://www.raspberrypi.org/documentation/installation/installing-images/linux.md
August 17, 2016, 05:30:43 PM
I think I fingered it out. I finally got a copy of the .img file from Canaan (they're apparently making changes to their site). I'd just never had to make a boot SD card in Ubuntu before...duh.
Anyway, what I'm finding is to just get the card formatted and mounted, then use sudo dd to write the image file to the card.
If anyone knows different, maybe PM me. It's my first A6; if this one works out, I'll do one more for home and then hope they release a "newer better".
Anyway, what I'm finding is to just get the card formatted and mounted, then use sudo dd to write the image file to the card.
If anyone knows different, maybe PM me. It's my first A6; if this one works out, I'll do one more for home and then hope they release a "newer better".
August 17, 2016, 05:09:20 PM
anyone with cheap electric have older gear pm me for details
Jump to: