KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1559.

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: kano on April 06, 2016, 04:41:43 AM

Quote from: sorry2xs on April 06, 2016, 03:00:54 AM

Quote from: zOU on April 06, 2016, 02:55:08 AM

You mean the share column shows 0 ?

https://i.imgur.com/GT6flJY.png

yes the problem is not the pool is with MRR my rigs were highjacked from the rental company for over an hour

Well, remember that if they are Bitmain miners, they default to allow anyone access 2 ways:

1) user/pass like most miners, have a default that you need to change
But also:
2) API, bitmain set the API so that anyone with network access can change your pool settings

So check them both.

Also note that if you reset the miner it will go back to the default

well 2 of the miners bitmain one is spondoolie-tech and the last one is the A6 as for passwords the first thing i do is to change them,as for the api the two bitmain products don't allow me ssh access and i have not figured out how to check the api.
Edit:just heard from MRR now they state that they show the rig was submitting work for that time frame so i asked for the code Grin

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: sorry2xs on April 06, 2016, 03:00:54 AM

Quote from: zOU on April 06, 2016, 02:55:08 AM

You mean the share column shows 0 ?

https://i.imgur.com/GT6flJY.png

yes the problem is not the pool is with MRR my rigs were highjacked from the rental company for over an hour

Well, remember that if they are Bitmain miners, they default to allow anyone access 2 ways:

1) user/pass like most miners, have a default that you need to change
But also:
2) API, bitmain set the API so that anyone with network access can change your pool settings

So check them both.

Also note that if you reset the miner it will go back to the default

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: zOU on April 06, 2016, 02:55:08 AM

You mean the share column shows 0 ?

yes the problem is not the pool is with MRR my rigs were highjacked from the rental company for over an hour

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

You mean the share column shows 0 ?

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

my miners are hashing but no shares

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: sorry2xs on April 06, 2016, 02:35:42 AM

what is wrong with the stats

what is wrong ?

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

what is wrong with the stats

Thisiserik

newbie

Activity: 22

Merit: 0

how long before I start getting stats on ckpoolmonitor at zachmonroe.com

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: kano on April 05, 2016, 06:52:00 PM

The simple answer is, unless there's a problem with your firmware, there's no need to set the work diff on the web site.
Setting it on the web site will only take effect if you set it above the pool's calculated value.

If there is a problem with the firmware then avoid using a power of 2 like 2048 - instead use a little higher e.g. 2052

As usual, remember that the work difficulty has no effect on your reward other than variance.
Higher diff means higher variance, but not much of an effect unless you make it a lot high e.g. if you set it 10x higher.

kano's right 9as always), I did several tests with setting diff on the website, and finally and stopped and I let the pool decide what's best

(s3+ and S5's)

Thisiserik

newbie

Activity: 22

Merit: 0

Quote from: PPOC on April 05, 2016, 11:19:08 PM

Quote from: Thisiserik on April 05, 2016, 11:14:47 PM

Quote from: PPOC on April 05, 2016, 10:23:30 PM

Quote from: Thisiserik on April 05, 2016, 10:12:22 PM

Quote from: Thisiserik on April 05, 2016, 10:00:42 PM

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Yes , I'm on and it was the extra space. It's great to be here. @Kano and @VRobb

After tripping breakers for the last 20 mins or so , I have all 3 machines running in a 1 bedroom apt. @Kano and @PPOS is this the API key I found in settings
If you create an account and use your account name, you will get more stats and you could use your API key on https://ckpoolmonitor.zachmonroe.com to get even more data and setup worked, block and hash rate alerts.

Just a suggestion,

Yes, the API key is under ACCOUNT then USER SETTINGS. The Key and your account name is what is needed for ckpoolmonitor. The user name is what our created your Kano account with and also what you mine with username.workername with worker name being anything you want.

Hope that helps

Thank you all so much ... tips all around. I dig the stats monitor ( I'm a gauges fan)

PPOC

hero member

Activity: 575

Merit: 500

Quote from: Thisiserik on April 05, 2016, 11:14:47 PM

Quote from: PPOC on April 05, 2016, 10:23:30 PM

Quote from: Thisiserik on April 05, 2016, 10:12:22 PM

Quote from: Thisiserik on April 05, 2016, 10:00:42 PM

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Yes , I'm on and it was the extra space. It's great to be here. @Kano and @VRobb

After tripping breakers for the last 20 mins or so , I have all 3 machines running in a 1 bedroom apt. @Kano and @PPOS is this the API key I found in settings
If you create an account and use your account name, you will get more stats and you could use your API key on https://ckpoolmonitor.zachmonroe.com to get even more data and setup worked, block and hash rate alerts.

Just a suggestion,

Yes, the API key is under ACCOUNT then USER SETTINGS. The Key and your account name is what is needed for ckpoolmonitor. The user name is what our created your Kano account with and also what you mine with username.workername with worker name being anything you want.

Hope that helps

Thisiserik

newbie

Activity: 22

Merit: 0

Quote from: PPOC on April 05, 2016, 10:23:30 PM

Quote from: Thisiserik on April 05, 2016, 10:12:22 PM

Quote from: Thisiserik on April 05, 2016, 10:00:42 PM

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Yes , I'm on and it was the extra space. It's great to be here. @Kano and @VRobb

After tripping breakers for the last 20 mins or so , I have all 3 machines running in a 1 bedroom apt. @Kano and @PPOS is this the API key I found in settings
If you create an account and use your account name, you will get more stats and you could use your API key on https://ckpoolmonitor.zachmonroe.com to get even more data and setup worked, block and hash rate alerts.

Just a suggestion,

PPOC

hero member

Activity: 575

Merit: 500

Quote from: Thisiserik on April 05, 2016, 10:12:22 PM

Quote from: Thisiserik on April 05, 2016, 10:00:42 PM

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Yes , I'm on and it was the extra space. It's great to be here. @Kano and @VRobb

If you create an account and use your account name, you will get more stats and you could use your API key on https://ckpoolmonitor.zachmonroe.com to get even more data and setup worked, block and hash rate alerts.

Just a suggestion,

sorry2xs

legendary

Activity: 924

Merit: 1000

Dark Passenger Bitcoin miner 2013,Bitcoin node

Quote from: gdpone on April 05, 2016, 06:29:29 PM

Quote from: sorry2xs on April 05, 2016, 06:20:26 PM

Quote from: gdpone on April 05, 2016, 06:17:48 PM

alright just getting back into things with a antminer s4. I used to mine on slush but from what ive noticed slush is not really decent anymore. Doing some reading up and kano seems like a dude I can support and in turn receive support. So im joining the pool, only question is should I set my difficulty to 2048? Is that still applicable with the latest s4 firmware?

checkthis out:https://bitcointalk.org/index.php?topic=274023.0

It times like this I believe im not smart enough to be mining bitcoin lol. But if I read that right 2TH / 1.4 = 1428?

not is 2000x1.4=2800

Thisiserik

newbie

Activity: 22

Merit: 0

Quote from: Thisiserik on April 05, 2016, 10:00:42 PM

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Yes , I'm on and it was the extra space. It's great to be here. @Kano and @VRobb

VRobb

hero member

Activity: 1610

Merit: 538

I'm in BTC XTC

Quote from: Thisiserik on April 05, 2016, 10:00:42 PM

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Are you mining directly to a btc address? If so, check for the insidious extra space at the end if you did a copy/paste. Got me once!

Thisiserik

newbie

Activity: 22

Merit: 0

I changed the password and am unfamiliar with how to perform _test url resolv-ability and port accessibility_ miner is still not kicking on

Quote from: vh on April 05, 2016, 09:50:37 PM

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

kano

legendary

Activity: 4634

Merit: 1851

Linux since 1997 RedHat 4

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

Did you manage to get it working?
The block was 95s after you posted

clgrissom3

legendary

Activity: 1736

Merit: 1032

Carl, aka Sonny :)

Quote from: Sierra8561 on April 05, 2016, 09:41:36 PM

Awesome, another block. Just another great day on the Kano pool!

Wow! How did I miss this one?!

vh

hero member

Activity: 699

Merit: 666

Quote from: Thisiserik on April 05, 2016, 09:37:40 PM

I am trying to connect 2 s4 and 1 s5 to kano.is and cannot get my rigs to connect/register after the save and apply with stratum+tcp://stratum.kano.is:3333. Please advise

the url is correct.

initial check: double check the username. set the password to "x".
next check: test url resolv-ability and port accessibility.

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1559. (Read 5352367 times)