Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1573. (Read 5352367 times)
March 31, 2016, 06:41:07 AM
i guess this last one is going to be electric greeennn
March 31, 2016, 06:40:02 AM
Holy shit another one
March 31, 2016, 06:36:01 AM
All back to green 
Good run for the last day of the March competition!
12 1/2 hours to go until we find the winners
Also, I'll make the April competition the same rules as March.
--
Wow
... another one
Good run for the last day of the March competition!
12 1/2 hours to go until we find the winners
Also, I'll make the April competition the same rules as March.
--
Wow
... another one March 31, 2016, 06:30:44 AM
block
March 31, 2016, 05:00:05 AM
so nice to come back and see 3 blocks after messing with some eth rigs
March 31, 2016, 04:16:07 AM
Quiet again
2 blocks in the last 2.5hrs
The first one by jmww with an awesome 3% transactions fees!
Then a quick one to follow by vsmkvb2 26.427% diff pushing the 5 block luck back over 100%
--
And a 3rd one by kipper01 only 21% diff
... and the share was 10595.7% Diff!
2 blocks in the last 2.5hrs
The first one by jmww with an awesome 3% transactions fees!
Then a quick one to follow by vsmkvb2 26.427% diff pushing the 5 block luck back over 100%
--
And a 3rd one by kipper01 only 21% diff
... and the share was 10595.7% Diff!
March 31, 2016, 01:17:36 AM
Any custom FW for S5? -- I am planning to get the S5 FW refreshed to do ckpool solo mining fulltime.
Only the binary I made which has to be manually copied over and is not permanent.you can even shorten the sequence :p
Code:
ssh 192.168.1.x -l root
cd /usr/bin
mv cgminer cgminer.bak
wget http://ck.kolivas.org/apps/cgminer/antminer/s5/4.9.0-150105/cgminer
chmod +x cgminer
/etc/init.d/cgminer.sh restart
I use this on my S5 because it's very simple to do, just set and forget. You will lose the fan % control (the gui stuff is still there but it doesn't do anything anymore), but I also saw a drop of 0.03% HW error and an increase in hash rate ~10GH/s both machine and pool side, oc'd @ 400 MHz. I like it. ymmv
March 30, 2016, 10:17:50 PM
No problem. Thanks for the quick reply.
March 30, 2016, 10:14:18 PM
So I installed your binary and my S5 fan shot up to 100% and stayed there, even though I have it set to 20% in the UI. Just to make sure that really was what caused it, I unplugged the S5, plugged it back in and it started up with fans at 20% like usual. I re-installed the binary, restarted cgminer and it was back to 100%.
Is there a fan speed flag or something I'm missing? 20% I can deal with... 100%? Not so much when it sits with me in my office
Been a very long time since I had anything to do with the S5 since I made that binary sorry. I had heard that fan control could not be set by the interface with it (going back to auto?) so there's not much I can do about it now. Is there a fan speed flag or something I'm missing? 20% I can deal with... 100%? Not so much when it sits with me in my office
March 30, 2016, 10:12:17 PM
Any custom FW for S5? -- I am planning to get the S5 FW refreshed to do ckpool solo mining fulltime.
Only the binary I made which has to be manually copied over and is not permanent.you can even shorten the sequence :p
Code:
ssh 192.168.1.x -l root
cd /usr/bin
mv cgminer cgminer.bak
wget http://ck.kolivas.org/apps/cgminer/antminer/s5/4.9.0-150105/cgminer
chmod +x cgminer
/etc/init.d/cgminer.sh restart
cd /usr/bin
mv cgminer cgminer.bak
wget http://ck.kolivas.org/apps/cgminer/antminer/s5/4.9.0-150105/cgminer
chmod +x cgminer
/etc/init.d/cgminer.sh restart
Is there a fan speed flag or something I'm missing? 20% I can deal with... 100%? Not so much when it sits with me in my office
March 30, 2016, 09:44:33 PM
Any custom FW for S5? -- I am planning to get the S5 FW refreshed to do ckpool solo mining fulltime.
Only the binary I made which has to be manually copied over and is not permanent.you can even shorten the sequence :p
Code:
ssh 192.168.1.x -l root
cd /usr/bin
mv cgminer cgminer.bak
wget http://ck.kolivas.org/apps/cgminer/antminer/s5/4.9.0-150105/cgminer
chmod +x cgminer
/etc/init.d/cgminer.sh restart
cd /usr/bin
mv cgminer cgminer.bak
wget http://ck.kolivas.org/apps/cgminer/antminer/s5/4.9.0-150105/cgminer
chmod +x cgminer
/etc/init.d/cgminer.sh restart
March 30, 2016, 09:38:00 PM
i forgot to state for S3 
tried the link for the s2 firmware i used from a forum post and github has disabled kano's firmware
EDIT
found the s3 firmware here
https://bitbucket.org/TheKano/cgminer-binaries/src/f5884bfece7a8dfd48550cb172272212459be51c/AntS3/?at=master
Any custom FW for S5? -- I am planning to get the S5 FW refreshed to do ckpool solo mining fulltime.
as far as i know kano stopped making firmware after s3
March 30, 2016, 09:31:48 PM
i forgot to state for S3
tried the link for the s2 firmware i used from a forum post and github has disabled kano's firmware
EDIT
found the s3 firmware here
https://bitbucket.org/TheKano/cgminer-binaries/src/f5884bfece7a8dfd48550cb172272212459be51c/AntS3/?at=master
Any custom FW for S5? -- I am planning to get the S5 FW refreshed to do ckpool solo mining fulltime.
March 30, 2016, 08:51:05 PM
i forgot to state for S3
tried the link for the s2 firmware i used from a forum post and github has disabled kano's firmware
EDIT
found the s3 firmware here
https://bitbucket.org/TheKano/cgminer-binaries/src/f5884bfece7a8dfd48550cb172272212459be51c/AntS3/?at=master
March 30, 2016, 08:43:37 PM
i forgot to state for S3
March 30, 2016, 08:35:18 PM
thanks
March 30, 2016, 08:34:38 PM
kano, if is not to much trouble can i get the link for s3 firmware please
https://bitcointalksearch.org/topic/m.14231724
March 30, 2016, 08:29:28 PM
I got 3 red darth vaders and lemon earlier. Did I win something or do I need 3 red vaders?
March 30, 2016, 08:26:53 PM
kano, if is not to much trouble can i get the link for s3 firmware please
March 30, 2016, 08:14:37 PM
I failed over briefly just before the block.
Hmm - yeah I had a delay of about a minute of no reply from the pool at 00:02 UTC, but then when the consoles came back to life there was no change in the pool hash rate so I just presumed it was my crappy internet.Must have been a small routing problem 'up south' since it didn't make a noticeable dent on the hash rate.
Jump to: