Is it possible for me to have my own node for CKPool similar to the node I set up for p2pool?
Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1669. (Read 5352367 times)
March 01, 2016, 02:17:20 PM
March 01, 2016, 02:14:55 PM
@thedreamer is your red line average above 250 TH/s?
I suspect they're over since looking at the pool stats I see they're pushing over 500THs at the moment. Besides, 120+% diff most likely won't be the high or low for the contest. Wouldn't be bad if it was the high, tho!! 
March 01, 2016, 01:57:36 PM
The Work Diff for all of my miners is 1.042k everytime I check in the last hour.
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
What I do:
- go here: https://kano.is/index.php?k=workers
- check the diff:
- go here : https://kano.is/index.php?k=workmgt
- set a diff that's 10% lower.
In that case, the miner start with the diff I set, the it gets adjusted (up) by the server.
Not a big impact on server load (miners don't restart that often) but saves time waiting for the server to adjust from 1K default.
Or i'm completely wrong
March 01, 2016, 01:50:19 PM
@thedreamer is your red line average above 250 TH/s?
March 01, 2016, 01:38:13 PM
thedreamer is smokin' ! block!
Thanks for cutting it off at 7 hours!
Thanks for cutting it off at 7 hours!
March 01, 2016, 12:43:08 PM
The Work Diff for all of my miners is 1.042k everytime I check in the last hour.
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
if you have kanos ui upgrade you can put --suggest-diff 400 in the other box where it says --quiet.
but ive never messed with the diff, so i couldnt tell you if it will go to 400 or if the system thinks 1.042k is the right amount.
March 01, 2016, 12:30:11 PM
The Work Diff for all of my miners is 1.042k everytime I check in the last hour.
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
Same for meNormaly it should be set around 400 by the pool after a few minutes for an Antminer S3
It's not big problem but my S1 miner have long share @1.042k.
March 01, 2016, 10:32:43 AM
I'll look into it tomorrow. Clearly the fix was wrong. Use a fixed diff in the meantime.
Hi ck,thx for your reply but the fixed diff didn't work for my small miners because I can add only a minimum diff
Looking forward to the next update.
March 01, 2016, 10:23:49 AM
I'll look into it tomorrow. Clearly the fix was wrong. Use a fixed diff in the meantime.
Yeah I switched to it yesterday. TY for being so 'active' here. I know others have said it before, but your great 'service' and helpfulness is why I think everyone is here .
March 01, 2016, 09:22:49 AM
I'll look into it tomorrow. Clearly the fix was wrong. Use a fixed diff in the meantime.
March 01, 2016, 09:20:38 AM
The Work Diff for all of my miners is 1.042k everytime I check in the last hour.
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
If it's not one extreme it's the other. Probably a side effect of the last change sorry. You can still alter it in the web interface.Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
Yeah, I think something is up with the difficulty also. My big rentals and proxiex are constantly up and down over the past two days even though I have it set to a minimum of 25 K is just weird it's never been like this before. When on vardiff, sometimes it just totally stops hashing cuz it can not find a proper difficulty.
March 01, 2016, 08:58:03 AM
The Work Diff for all of my miners is 1.042k everytime I check in the last hour.
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
If it's not one extreme it's the other. Probably a side effect of the last change sorry. You can still alter it in the web interface. Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
March 01, 2016, 08:47:45 AM
Woohoo, my new S7 is plugged in too Kano and hashing away...I know Im a big player now with an S5 AND an S7 
Question:
Does an S7 normally run a little (~8C) hotter than an S5?
Crash
s5 is a 600 watt heaterQuestion:
Does an S7 normally run a little (~8C) hotter than an S5?
Crash
s7 is a 1200 watt heater
March 01, 2016, 08:29:46 AM
The Work Diff for all of my miners is 1.042k everytime I check in the last hour.
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
Normaly it should be set around 400 by the pool after a few minutes for an Antminer S3
March 01, 2016, 06:47:45 AM
AVALON6 GIVEAWAY is very close!
The contest has started but we wont know who wins which prize until the first block is mined on the network in April (UTC time). However this block could be in the running for the prize that's assigned the highest CDF (assuming a valid contest miners gets this block).
March 01, 2016, 06:14:54 AM
well that mother is dead
March 01, 2016, 06:11:30 AM
Slow party - but it finally started 
(and a collection of txns confirmed also)
(and a collection of txns confirmed also)
March 01, 2016, 05:23:29 AM
well i thought i was going to wake up to a block party
Start the party without us... go on, you know you want to
March 01, 2016, 05:10:44 AM
well i thought i was going to wake up to a block party
March 01, 2016, 05:08:12 AM
Is this amount of stale is normal?..
http://s11.postimg.org/lkr6px143/image.png
I'm using s5 as my miner
Well depends on where you are and the S5.http://s11.postimg.org/lkr6px143/image.png
I'm using s5 as my miner
It's not overly high for an S5 though.
So I should change the diff or something?
78-100ms is rather high... a fellow Malaysian miner clocked around 30-40ms.
looks like your ISP/Streamyx can be improved ...
I am using Singtel's MIO home fibre broadband service.
PING sg.kano.is (139.162.5.112): 56 data bytes
64 bytes from 139.162.5.112: icmp_seq=0 ttl=53 time=4.357 ms
64 bytes from 139.162.5.112: icmp_seq=1 ttl=53 time=3.956 ms
64 bytes from 139.162.5.112: icmp_seq=2 ttl=53 time=4.481 ms
64 bytes from 139.162.5.112: icmp_seq=3 ttl=53 time=4.361 ms
64 bytes from 139.162.5.112: icmp_seq=4 ttl=53 time=4.590 ms
64 bytes from 139.162.5.112: icmp_seq=5 ttl=53 time=3.971 ms
64 bytes from 139.162.5.112: icmp_seq=6 ttl=53 time=4.630 ms
64 bytes from 139.162.5.112: icmp_seq=7 ttl=53 time=4.178 ms
^C
--- sg.kano.is ping statistics ---
8 packets transmitted, 8 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 3.956/4.316/4.630/0.243 ms
Jump to: