Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 260. (Read 5352633 times)

jr. member
Activity: 284
Merit: 3
Update on T1's from Halong.
https://bitcointalksearch.org/topic/--3376606

Kano, when I get these, do you still need someone to help you to see if you can start accepting them, or has somebody helped you from batch 1 already?
Well I've still not heard about mine yet ... but it's not testing on the live pool, it's wasting mining on a test pool.
I'm not gonna switch in code changes for this guff before proper testing.

How long on a test pool, if its just a few days I don't mind. If you need it for a month that's another story.
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Update on T1's from Halong.
https://bitcointalksearch.org/topic/--3376606

Kano, when I get these, do you still need someone to help you to see if you can start accepting them, or has somebody helped you from batch 1 already?
Well I've still not heard about mine yet ... but it's not testing on the live pool, it's wasting mining on a test pool.
I'm not gonna switch in code changes for this guff before proper testing.
jr. member
Activity: 238
Merit: 5
And chinese are so inventive in naming their pools it is hilarious

https://imgur.com/a/5EQj9yZ
jr. member
Activity: 119
Merit: 2
Moving all my units from CT (18.5c/kWh) to Idaho collocation (7c/kWh) and a low hosting fee.

My buddy is starting a collocation service. He has had 25 machines there since December, and his current location is stifled to 300 units due to HVAC.

Another building in the complex is where he'll grow into.

I'm getting an attractive rate on the hosting as he's basically proving his business model with my machines. There's also been talk of partnership Cheesy

I'm a 100% work from home dude, so I could move to Idaho tomorrow! Would be really neat to keep my lucrative day job and be a machine tech in a legit mining facility.

Still trying to get his machines off slush and over here.

So yeah, I'll be down until May 15. I'm driving the units out there starting wed night and hoping to be back Monday night. Gonna be tight! I'm a photographer so I've always wanted to travel across the country.

Wish me luck folks! Hate to lose my 5Nd but it's for the greater good.

Cheers!
jr. member
Activity: 284
Merit: 3
Update on T1's from Halong.
https://bitcointalksearch.org/topic/--3376606

Kano, when I get these, do you still need someone to help you to see if you can start accepting them, or has somebody helped you from batch 1 already?
member
Activity: 238
Merit: 11
Not joking, we need a block... I'm jones'in for a block......

Damn you fickle laws of probability!
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
block
FAKE NEWS!!!

Welcome to your first -1 Trust!
Good for you for following through on that -1 Trust. There's no need to be giving false alarms around here.

I understand that he may have meant it as a "half joke" but probably half jerk too... Wink
I certainly don't find posting a fake block in any way a joke ... that is one thing that I've made quite clear in IRC in the past with bans ...
I'll do it here also if necessary.

He or she is just taking taking a piss of the rest of us clap and cheer when real block hits.
No, the problem is that he basically called a bunch of people idiots, then they made a joke of it, then he abused them for what he started.
I don't mind the making a joke of it, but I did mind the abuse.

However, posting a "block" is pretty much like calling 911 for a joke ... it's not funny around here.
... and as I said, I consider it bannable so take the warning.
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
@Kano or anybody else. Doesnt 5ND mean that the graph's red area should always be moving on the right? It seems like with the PH/s always changing the 5ND is changing and it should be left to right instead of set in the middle of the screen? According to this graph, my temporary boost wouldnt even apply to this block?

https://i.imgur.com/HXXNOiS.png?1
If you click on the "time key" checkbox, you'll see time goes forward from left to right - so the light-red area moves left.
Yeah Left to Right Smiley

The "Last 5ND Reward ->" is showing where it starts - it finishes at the last block.
i.e. the ending point is obvious, the last block, but the starting point is 5Nd before that, which isn't obvious.
jr. member
Activity: 238
Merit: 5
block
FAKE NEWS!!!

Welcome to your first -1 Trust!
Good for you for following through on that -1 Trust. There's no need to be giving false alarms around here.

I understand that he may have meant it as a "half joke" but probably half jerk too... Wink
I certainly don't find posting a fake block in any way a joke ... that is one thing that I've made quite clear in IRC in the past with bans ...
I'll do it here also if necessary.

He or she is just taking taking a piss of the rest of us clap and cheer when real block hits.
full member
Activity: 350
Merit: 158
#takeminingback
Do you guys give miners a break or a rest period or just run them flat out until they die ?  I ask because i'm experiencing a bit of a t/h issue with my miner. Temps all good at all times between 79' and 85'.

fan speeds in and out around 4900

all chips on all cards working

but the t/h average has dropped from near 11 to 9.8 ish.

i'm running a whatsminer m3 in a soundproofed box with 5" insulated ducting , heat side direct to outside.

Over the last two weeks ive rebooted several times and it appears to bring it up then slowly back down again.

Any ideas would be greatfully received.

Thanks

Check your ethernet cable. I've found the M3's to be very sensitive with internet connection, and the hashrate will drop like that. Also, if you can, check your psu to make sure its running correctly. If it's not pushing the watts high enough, that may affect the hashrate. This will require a "clampmeter" to check how many amps it's pulling, without disconnecting the miner. Take a look through the Pangolinminer thread below. Goodluck!!!

https://bitcointalksearch.org/topic/pangolinminer-whatsminer-faqs-2345436
jr. member
Activity: 284
Merit: 3
@Kano or anybody else. Doesnt 5ND mean that the graph's red area should always be moving on the right? It seems like with the PH/s always changing the 5ND is changing and it should be left to right instead of set in the middle of the screen? According to this graph, my temporary boost wouldnt even apply to this block?

newbie
Activity: 67
Merit: 0
Do you guys give miners a break or a rest period or just run them flat out until they die ?  I ask because i'm experiencing a bit of a t/h issue with my miner. Temps all good at all times between 79' and 85'.

fan speeds in and out around 4900

all chips on all cards working

but the t/h average has dropped from near 11 to 9.8 ish.

i'm running a whatsminer m3 in a soundproofed box with 5" insulated ducting , heat side direct to outside.

Over the last two weeks ive rebooted several times and it appears to bring it up then slowly back down again.

Any ideas would be greatfully received.

Thanks
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
I’ll be taking my farm offline today until Sunday / Monday due to a location move Sad

Approx 890/920GH/s (royalmarine)

I’ll be back as soon as humanly possible Smiley

Knowing my luck, this will be the few days Kano pool get 20 blocks  Grin Grin Grin
Well your reward may still not quite get to zero if your quick enough Smiley
5Nd is currently just over 6 days.

... and any blocks found before your 5Nd runs out, you'll also get rewards.
jr. member
Activity: 284
Merit: 3
I’ll be taking my farm offline today until Sunday / Monday due to a location move Sad

Approx 890/920GH/s (royalmarine)

I’ll be back as soon as humanly possible Smiley

Knowing my luck, this will be the few days Kano pool get 20 blocks  Grin Grin Grin


20 blocks would be lovely thanks Smiley


come back soon an dmine on Smiley

Personally I hope this is a 300% block then we find 20 quickly. I wanna be fully ramped up Cheesy
newbie
Activity: 67
Merit: 0
I’ll be taking my farm offline today until Sunday / Monday due to a location move Sad

Approx 890/920GH/s (royalmarine)

I’ll be back as soon as humanly possible Smiley

Knowing my luck, this will be the few days Kano pool get 20 blocks  Grin Grin Grin


20 blocks would be lovely thanks Smiley


come back soon an dmine on Smiley
newbie
Activity: 34
Merit: 0
I’ll be taking my farm offline today until Sunday / Monday due to a location move Sad

Approx 890/920GH/s (royalmarine)

I’ll be back as soon as humanly possible Smiley

Knowing my luck, this will be the few days Kano pool get 20 blocks  Grin Grin Grin
jr. member
Activity: 284
Merit: 3
146% of blocks on the wall. Keep chippin guys!
member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
block
FAKE NEWS!!!

Welcome to your first -1 Trust!
Good for you for following through on that -1 Trust. There's no need to be giving false alarms around here.

I understand that he may have meant it as a "half joke" but probably half jerk too... Wink
I certainly don't find posting a fake block in any way a joke ... that is one thing that I've made quite clear in IRC in the past with bans ...
I'll do it here also if necessary.
Agreed. Not funny in the least. Didn't mean for that to sound like I was condoning that behavior.

Edit: Some people have a sick sense of humor, is more what I was trying to convey.
member
Activity: 490
Merit: 16
1xA921 + 1xA741 + Backup-->1xA6 ;)
Nice to see that Hashrate Growing!!! Let's keep it going!!! Big Thanx to EVERYONE!!!
If that doesn't put a pep in your step, something's wrong. Time for some celebratory dancin'!

legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
block
FAKE NEWS!!!

Welcome to your first -1 Trust!
Good for you for following through on that -1 Trust. There's no need to be giving false alarms around here.

I understand that he may have meant it as a "half joke" but probably half jerk too... Wink
I certainly don't find posting a fake block in any way a joke ... that is one thing that I've made quite clear in IRC in the past with bans ...
I'll do it here also if necessary.
Jump to: