▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 54.

variable42

jr. member

Activity: 38

Merit: 1

Quote from: DKu on February 09, 2018, 02:41:44 AM

I repeat my questions one more time. How the autoexchange works on Zpool? Why SYS instead of BTC and LANA instead of LTC? And where is my funds?

If you specify a BTC wallet as your username, then your password needs to be c=BTC. If you use an LTC wallet, then your password needs to be c=LTC. If your wallet does not match what you specify in your password, then you end up with nothing.

DKu

newbie

Activity: 13

Merit: 0

Quote from: DKu on February 07, 2018, 05:42:37 AM

Could crackfoo or someone else explain me how the autoexchange works on Zpool? 12 hours ago I've started to mine Denarium with next parameters -o stratum+tcp://tribus.mine.zpool.ca:8533 -u BTCwallet -p c=DNR But next after 3 hours I've founded that all conversion is going to SYS and have warning. Then I have restart miners with next parameters -o stratum+tcp://tribus.mine.zpool.ca:8533 -u LTCwallet -p c=DNR but now convertion is going in LANA. Is it correct? Why zpool's autoexchange have so strange behaviour? I have Total paid LANA, but I don't see any deposit on my LTC wallet and any blocks in explorer. Where is my funds? And what I must to do with Unpaid SYS? Thank you.

I repeat my questions one more time. How the autoexchange works on Zpool? Why SYS instead of BTC and LANA instead of LTC? And where is my funds?

Lercker

sr. member

Activity: 358

Merit: 250

Quote from: chino_16 on February 08, 2018, 10:40:48 AM

Right now my total earning is 0.004 still no payout hopefully next payout is 0.005 or give or take and my balance is 0.00110256

That means you do not have enough for a payout... You should get one this week but not till your earnings clear to your Balance.

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: crackfoo on February 08, 2018, 10:32:06 AM

Quote from: DS-M on February 08, 2018, 10:26:38 AM

Hello,

Is Zpool.ca down again?

- Maintenance ? Or something else ?

8-2-2018 : 16:20 - Site unreachable, or whitepage

Bfore this, Zpool.ca almost lost connection to 8 of our mining rigs. So to less cap ?

Let us now.

Your loyal-miner ,

DS-M

http://www.zpool.ca/?address=1Ev698UrUTL52wyrdRfRK25BfjXaA7YDWd

just one of the web servers. its running with just one now untill I get the other back so might get a white page now and then

should be ok now.

chino_16

newbie

Activity: 11

Merit: 0

Quote from: Lercker on February 08, 2018, 10:00:02 AM

Quote from: chino_16 on February 08, 2018, 08:49:47 AM

@crackfoo

Question:

This going to be my 2nd payout, since i pass the 0.0025, how do I calculate my next pay?

do i just add 0.0025 on Total Earned or do I just wait for the Total Unpaid to again reach 0.0025?

hate math haha

You're paid whatever your Balance is... The Total Earned is irrelevant since after 60 days it starts to shrink (with Total Paid). Total Unpaid is an estimate, if you stopped mining with exactly 0.0025 you could end up with 0.0024 after everything clears the exchange in the balance and not get a pay out. Also as you keep mining you would add more to the 0.0025 and still get that payout so you could get a payout of 0.003.
So basically their is no way for you to calculate your next payout until you are paid and then your balance needs to be above 0.0025 again.

Right now my total earning is 0.004 still no payout hopefully next payout is 0.005 or give or take and my balance is 0.00110256

crackfoo

legendary

Activity: 3486

Merit: 1126

Quote from: DS-M on February 08, 2018, 10:26:38 AM

Hello,

Is Zpool.ca down again?

- Maintenance ? Or something else ?

8-2-2018 : 16:20 - Site unreachable, or whitepage

Bfore this, Zpool.ca almost lost connection to 8 of our mining rigs. So to less cap ?

Let us now.

Your loyal-miner ,

DS-M

http://www.zpool.ca/?address=1Ev698UrUTL52wyrdRfRK25BfjXaA7YDWd

just one of the web servers. its running with just one now untill I get the other back so might get a white page now and then

DS-M

newbie

Activity: 31

Merit: 0

Hello,

Is Zpool.ca down again?

- Maintenance ? Or something else ?

8-2-2018 : 16:20 - Site unreachable, or whitepage

Bfore this, Zpool.ca almost lost connection to 8 of our mining rigs. So to less cap ?

Let us now.

Your loyal-miner ,

DS-M

http://www.zpool.ca/?address=1Ev698UrUTL52wyrdRfRK25BfjXaA7YDWd

Lercker

sr. member

Activity: 358

Merit: 250

Quote from: chino_16 on February 08, 2018, 08:49:47 AM

@crackfoo

Question:

This going to be my 2nd payout, since i pass the 0.0025, how do I calculate my next pay?

do i just add 0.0025 on Total Earned or do I just wait for the Total Unpaid to again reach 0.0025?

hate math haha

You're paid whatever your Balance is... The Total Earned is irrelevant since after 60 days it starts to shrink (with Total Paid). Total Unpaid is an estimate, if you stopped mining with exactly 0.0025 you could end up with 0.0024 after everything clears the exchange in the balance and not get a pay out. Also as you keep mining you would add more to the 0.0025 and still get that payout so you could get a payout of 0.003.
So basically their is no way for you to calculate your next payout until you are paid and then your balance needs to be above 0.0025 again.

chino_16

newbie

Activity: 11

Merit: 0

@crackfoo

Question:

This going to be my 2nd payout, since i pass the 0.0025, how do I calculate my next pay?

do i just add 0.0025 on Total Earned or do I just wait for the Total Unpaid to again reach 0.0025?

hate math haha

HardBlockMiner

jr. member

Activity: 224

Merit: 2

Quote from: Amstellodamois on February 07, 2018, 05:36:54 PM

Quote from: bsobel on February 05, 2018, 02:06:06 PM

And since you wind up paying an exchange fee anyhow (mined coins -> BTC -> Payment coin) I personally recommend just taking BTC and exchanging it yourself. This way you can control the timing better (worse case its a wash as your paying the exchange fee either way)

Suppose you mine ETH and want to be paid in XMR, the pool will change to BTC before changing to XMR!?

If you want to mine ETH and get paid in XMR you are double hosed. They don't mine ETH or XMR. The only coins you can get paid in are ones that they mine and since they don't mine XMR you are sol.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: Amstellodamois on February 07, 2018, 05:36:54 PM

Quote from: bsobel on February 05, 2018, 02:06:06 PM

And since you wind up paying an exchange fee anyhow (mined coins -> BTC -> Payment coin) I personally recommend just taking BTC and exchanging it yourself. This way you can control the timing better (worse case its a wash as your paying the exchange fee either way)

Suppose you mine ETH and want to be paid in XMR, the pool will change to BTC before changing to XMR!?

this pool doesnt do eth.. but yeah this is sort of what happens.. it doesn't necessarily exchange them to btc first, but it values the coins you mine at the btc exchange rate, then pays you the amount you mined vs that.

this is why if you get paid out in the coin you mine, say one of the algos that have only a couple coins.. you will always get less than you expect.. its not the pools fault. its so its fair to the people who get paid in btc..

bsobel

newbie

Activity: 19

Merit: 0

Quote from: Amstellodamois on February 07, 2018, 05:36:54 PM

Quote from: bsobel on February 05, 2018, 02:06:06 PM

And since you wind up paying an exchange fee anyhow (mined coins -> BTC -> Payment coin) I personally recommend just taking BTC and exchanging it yourself. This way you can control the timing better (worse case its a wash as your paying the exchange fee either way)

Suppose you mine ETH and want to be paid in XMR, the pool will change to BTC before changing to XMR!?

That is my understanding of what occurs.

bsobel

newbie

Activity: 19

Merit: 0

I noticed that my S9's do not have extra nonce support enabled, but I do have #xnsub at the end of the stratum URL. My D3's do show correctly. I have the latest firmware (November 2017) on the S9's. Should I be concerned that it doesn't appear to be enabled properly? Is there something else I need to do to make this work? Thanks!

Amstellodamois

newbie

Activity: 182

Merit: 0

Quote from: bsobel on February 05, 2018, 02:06:06 PM

And since you wind up paying an exchange fee anyhow (mined coins -> BTC -> Payment coin) I personally recommend just taking BTC and exchanging it yourself. This way you can control the timing better (worse case its a wash as your paying the exchange fee either way)

Suppose you mine ETH and want to be paid in XMR, the pool will change to BTC before changing to XMR!?

peteone43

newbie

Activity: 10

Merit: 0

FIXED,

thanks Zpool Admin

HanopkaH

newbie

Activity: 21

Merit: 0

Whats going on with "phi"? Right now my 1070 is making 4.5 Euro a day ( way above neocrypt and others ). Maybe too good to be true and i should disable it like yestarday when there was a problem with the wallet ?

peteone43

newbie

Activity: 10

Merit: 0

Quote

The pool takes the arguments you pass with -p, and makes decisions on them. If you just set "c=GBX" you are setting that on the miner, which is probably ignoring it. You set -p c=GBX (or whatever) and the entire argument gets sent to the pool, which then dictates your payout coins.

interesting.ok i did not know that thank you i'll try with -p

jagauthier

newbie

Activity: 52

Merit: 0

Quote from: peteone43 on February 07, 2018, 01:33:27 PM

Quote

If you are being literal your missing -p before your c=GBX I think

you don't need a password (-p) if there is no password

The pool takes the arguments you pass with -p, and makes decisions on them. If you just set "c=GBX" you are setting that on the miner, which is probably ignoring it. You set -p c=GBX (or whatever) and the entire argument gets sent to the pool, which then dictates your payout coins.

peteone43

newbie

Activity: 10

Merit: 0

Quote

If you are being literal your missing -p before your c=GBX I think

you don't need a password (-p) if there is no password

bsobel

newbie

Activity: 19

Merit: 0

Quote from: peteone43 on February 07, 2018, 12:28:26 PM

hello @crackfoo

what is the proper line command to mine GBX

I'm currently getting this:

We are short of this currency (1892.75201175 GRN). Please STOP your miners and switch to BTC until we find more GRN blocks.
YOU are responsible if you continue to mine for GRN despite this warning.

my current setup is

ccminer-x64 -a neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u GZgRd5D1tktPtCVAHpGosk86qWojD4gHSy c=GBX
pause

It's a GoByte qt wallet

What am I missing here?

Also is there a way to convert those GRNs into something else since they have been already mined as well?

If you are being literal your missing -p before your c=GBX I think

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 54. (Read 279601 times)