this ninja is show 0 mbtc that mean no income?
I am seeing this as well.
I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.
Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 88. (Read 279744 times)
December 27, 2017, 01:43:11 PM
It's a merge mined coin, which means it is mined alongside other coins at no cost to you. There are no exchanges for it therefore you receive no profit for it, but it didn't cost you any extra work. You can safely ignore any that show auxPOW.
this ninja is show 0 mbtc that mean no income?
I am seeing this as well.
I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.
this ninja is show 0 mbtc that mean no income?
I am seeing this as well.
I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.
December 27, 2017, 01:31:32 PM
this ninja is show 0 mbtc that mean no income?
I am seeing this as well.
I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.
December 27, 2017, 01:29:26 PM
No you can't specify what coin you want to mine, just what coin you want to be paid in (if there are enough blocks being found to pay you out). The whole point of a multipool is to always be mining the most profitable coin, so being able to choose one is pointless.
Hi,
i would like to mine the coin with my S9 Antminer an i test this config.
stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB
is this wrong ? because the S9 say
stratum+tcp://sha256.mine.zpool.ca:3333 my BTC wallet adress Dead .
can anybody help me plase.
I have this exact same problem (I use c=BTC)
I tried to remove stratum+tcp:// too same thing
Yes, c= means in what currency you want to get paid ... I also came here to ask is there a password parameter that can lock you to a single coint to mine (but get paid in another).
So, devs, or anyone else? Is there such option here? In Prohashing c= shows the coin you want to mine specifically, here we saw already it's not the case ...
Hi,
i would like to mine the coin with my S9 Antminer an i test this config.
stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB
is this wrong ? because the S9 say
stratum+tcp://sha256.mine.zpool.ca:3333 my BTC wallet adress Dead .
can anybody help me plase.
I tried to remove stratum+tcp:// too same thing
Yes, c= means in what currency you want to get paid ... I also came here to ask is there a password parameter that can lock you to a single coint to mine (but get paid in another).
So, devs, or anyone else? Is there such option here? In Prohashing c= shows the coin you want to mine specifically, here we saw already it's not the case ...
December 27, 2017, 01:03:27 PM
Hi Crackfoo, I noticed yesterdays payout for the first time I received less than what was sent, I have always received the exact figure listed in the zpool payouts window. yesterday it said payout (in BTC) 0.00281416 but I received 0.00251416 to my wallet
In the history of over 100k+ tx sent by the pool over the past couple years you’d be the first to experience this so forgive me if I totally don’t believe you. But alas, you’re going to make me check the txid on the blockchain arnt you?
Wallet address?
December 27, 2017, 12:37:04 PM
Hi Crackfoo, I noticed yesterdays payout for the first time I received less than what was sent, I have always received the exact figure listed in the zpool payouts window. yesterday it said payout (in BTC) 0.00281416 but I received 0.00251416 to my wallet
http://img2.picload.org/image/dddoaoga/e2.png
http://img2.picload.org/image/dddoaoga/e1.png
http://img2.picload.org/image/dddoaoga/e2.png
http://img2.picload.org/image/dddoaoga/e1.png
December 27, 2017, 07:26:30 AM
Hi,
i would like to mine the coin with my S9 Antminer an i test this config.
stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB
is this wrong ? because the S9 say
stratum+tcp://sha256.mine.zpool.ca:3333 my BTC wallet adress Dead .
can anybody help me plase.
I tried to remove stratum+tcp:// too same thing
Yes, c= means in what currency you want to get paid ... I also came here to ask is there a password parameter that can lock you to a single coint to mine (but get paid in another).
So, devs, or anyone else? Is there such option here? In Prohashing c= shows the coin you want to mine specifically, here we saw already it's not the case ...
December 27, 2017, 03:54:19 AM
How do I find out which algorithm is the most profitable to mine on zpool, is this shown somewhere on the website? I understand that there is some Algo switching features, but if I just want to simply see what is most profitable right now (or top 3), how would I do that?
December 26, 2017, 11:37:57 PM
Hi,
i would like to mine the coin with my S9 Antminer an i test this config.
stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB
is this wrong ? because the S9 say
stratum+tcp://sha256.mine.zpool.ca:3333 my BTC wallet adress Dead .
can anybody help me plase.
I tried to remove stratum+tcp:// too same thing
December 26, 2017, 11:21:21 PM
Does yescrypt work on nvidia cards?
no, its CPU only
December 26, 2017, 11:12:11 PM
Does yescrypt work on nvidia cards?
December 26, 2017, 10:28:25 PM
Fixed
Hey crackfoo
Can you fix mine as well? I used my Verge (XVG) address with the correct -p c=XVG but the wallet shows as UNO in your pool
My address is DA7twwUYGg4BqWgsCoEN3aT2pyEwop7hN4
Thanks in advance.
December 26, 2017, 10:11:27 PM
689 miners with a total of 344.1 MH/s? I think something is wrong with the stratum. Restart?
I think we may need rolling daily bounces of the stratum (stratums? strati?)
Nist5 and X17 were having the same kind of problem yesterday.
Yeah, I think I'm going to take a break from zpool for a bit. Hopefully crackfoo will get around to it soon.
Maybe he'll raise the pool fees to 5% and hire some off-shore Indian 24x7 phone support for us
Maybe. But taking a break is probably more reasonable.
December 26, 2017, 09:24:10 PM
I am getting a ton of rejected shares when mining Keccak?
The error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #KeccakThe error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..
Am I in the right/wrong spot?
Where should I be navigating?
Haha, yes what? Can you help a bit more - i don't see "keccak" in that file at all?
However, now I am getting lots of rejected shares on Lyra2z....any suggestions on that one?
The message is "reject reason: invalid job id"
About 50% of shares are rejected.
December 26, 2017, 09:08:43 PM
I am getting a ton of rejected shares when mining Keccak?
The error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #KeccakThe error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..
Am I in the right/wrong spot?
Where should I be navigating?
Haha, yes what? Can you help a bit more - i don't see "keccak" in that file at all?
December 26, 2017, 09:07:19 PM
I am getting a ton of rejected shares when mining Keccak?
The error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #KeccakThe error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..
Am I in the right/wrong spot?
Where should I be navigating?
Haha, yes what? Can you help a bit more - i don't see "keccak" in that file at all?
December 26, 2017, 09:06:57 PM
We need Crown Coin (CRW) to be added to zpool as soon as pissible 
crown is having chain issues atm.
December 26, 2017, 08:50:44 PM
I am getting a ton of rejected shares when mining Keccak?
The error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #KeccakThe error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..
Am I in the right/wrong spot?
Where should I be navigating?
December 26, 2017, 08:49:02 PM
I am getting a ton of rejected shares when mining Keccak?
The error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #KeccakThe error is
"reject reason: Low Difficulty Share"
This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)
Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA
This is my .bat file;
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"
Am I doing something wrong? Why so many rejects (literally 50%)
Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..
Am I in the right/wrong spot?
Where should I be navigating?
I'm also getting a ton of rejected shares on Lyra2z; "Reject Reason: Invalid Job."
December 26, 2017, 07:36:59 PM
Hi, A few days ago I included the -p c = BTC in the miner, but I still get the following message
https://imgur.com/V6Ugok5
And the miner is:
https://imgur.com/lnC06UN
Any solutions?
Regards
https://imgur.com/V6Ugok5
And the miner is:
https://imgur.com/lnC06UN
Any solutions?
Regards
There should NOT be any SPACES in the string. "-p c=BTC" not "-p c = BTC"
Please post the COMPLETE command-line you're running.
No spaces.. sorry
ccminer.exe -a x17 -o stratum+tcp://x17.mine.zpool.ca:3737 -u
December 26, 2017, 06:48:30 PM
689 miners with a total of 344.1 MH/s? I think something is wrong with the stratum. Restart?
I think we may need rolling daily bounces of the stratum (stratums? strati?)
Nist5 and X17 were having the same kind of problem yesterday.
Yeah, I think I'm going to take a break from zpool for a bit. Hopefully crackfoo will get around to it soon.
Maybe he'll raise the pool fees to 5% and hire some off-shore Indian 24x7 phone support for us
Jump to: