▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 91.

jb7032

full member

Activity: 182

Merit: 100

@crackfoo- Any chance you would consider fetching LTC as a secondary major pay out option? I don't want to mine straight to an exchange wallet and trying to move BTC is beyond painful at this point. My rigs were making ~$100 a day and if I try to move ~$1000 its like $150 in fees due to all the small inputs.

Junkbarman

full member

Activity: 168

Merit: 100

What's with Veltor coin sitting unconfirmed? 2days now and sitting unconfirmed?

thel3lue

newbie

Activity: 2

Merit: 0

https://imgur.com/a/2yQ61

this ninja is show 0 mbtc that mean no income?

tws

newbie

Activity: 13

Merit: 0

Quote from: zimkan on December 25, 2017, 05:52:20 PM

Has anybody Decred as most profitable coin in awesomeminer, and no income on zpool with it?

Good question, All I know is mine is on profit switching an usually mines nist5, Lyra, or Blake now I’m new so not sure..

tws

newbie

Activity: 13

Merit: 0

Quote from: jpouza on December 25, 2017, 11:39:41 AM

Quote from: tws on December 25, 2017, 10:49:24 AM

Quote from: jpouza on December 25, 2017, 08:50:30 AM

Quote from: just.dont on December 25, 2017, 05:42:17 AM

Nist5 is acting up again. 70-ish MH/s reported by the miner, and only 2-ish MH/s shows up in web interface.
It's exactly as it was a couple of days ago, before Nist5 pool was reported to be fixed.

yup, it's broken again Sad

So I am using awesome miner and zpool and having the same issue where it’s only eporting about 2 MH/s does that mean I should mine something else or am I getting what my miner is saying?

x17 reporting wrong hash too in the site...I think we should wait for an OP answer or target other pool.

Seems like the hash rate is working better now...

logistyc

newbie

Activity: 19

Merit: 0

Lol! Only You told me and it worked) Thanks again! JaredKaragen!

logistyc

newbie

Activity: 19

Merit: 0

how often are you re-checking the stats in your config? Might play a part, but not sure personally. The nemosminer thread may be a better place to ask about this type of question.
[/quote]
Not found this option(
Thank you!
Ask on the forum NEMOSMINER!

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: logistyc on December 25, 2017, 06:27:38 PM

Hi!

NemosMiner-v2.3c-beta
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Maybe something happened with the pool?

Not sure, im seeing API online, and miners connected:
http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN

how often are you re-checking the stats in your config? Might play a part, but not sure personally. The nemosminer thread may be a better place to ask about this type of question.

logistyc

newbie

Activity: 19

Merit: 0

Hi!

NemosMiner-v2.3c-beta
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Maybe something happened with the pool?

zimkan

newbie

Activity: 9

Merit: 0

Has anybody Decred as most profitable coin in awesomeminer, and no income on zpool with it?

aarons6

legendary

Activity: 1736

Merit: 1006

@crackfoo

can you check the diff settings.. i think they are broken..

cgminer/4.9.2   d=512,c=XVG   sha256   32768

the diff is set to 512, yet its 32768.. :/

same with scrypt..
bfgminer/5.2.0-188-g   c=XVG,d=1024   scrypt   32768

i have compacs and moonlander usbs.. they dont work with such a high diff.

edit it also doesnt matter what way i put the password
cgminer/4.9.2   c=XVG,d=512   sha256   32768

kirk4646

newbie

Activity: 2

Merit: 0

hi guys.

is there a way i can set the minimum payout at all?

thanks

eleutherios

newbie

Activity: 9

Merit: 0

hi guys, can i ask what to put in c=XBT or BTC?
i am mining zcoin with bitcoin address at kraken

ukjack

newbie

Activity: 34

Merit: 0

Just switched 50 S9s over to zpool as earnings are reportedly very high due to UNB coin.
Will report back earnings in 24hrs.

kugr

newbie

Activity: 13

Merit: 0

Quote from: cryptominer420 on December 25, 2017, 01:50:29 PM

Quote from: kugr on December 25, 2017, 01:41:27 PM

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.

I do get that, I guess I will have to wait till I get some better hardware. Thanks for the prompt reply.

cryptominer420

sr. member

Activity: 450

Merit: 255

Quote from: kugr on December 25, 2017, 01:41:27 PM

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.

kugr

newbie

Activity: 13

Merit: 0

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Peasantfarmguy

newbie

Activity: 58

Merit: 0

Quote from: uhro on December 25, 2017, 06:03:12 AM

Quote from: Peasantfarmguy on December 25, 2017, 02:33:22 AM

Quote from: JaredKaragen on December 25, 2017, 01:43:23 AM

Quote from: henrynguyen20 on December 24, 2017, 10:24:54 PM

can i receive Verge instead of Btc ?
Thanks
Henry

yes.

use a verge wallet address for username, and use a password similar to this example:
c=XVG,scrypt

so i can recieve xvg verge instead of dash?
I thought adding algo next to symbol was a no go on zpool?
thanks. Merry Christmas

putting the algo there doesn't seem to do anything for my miners either way, as long as you have c=XXX for whatever coin you want (and a proper wallet for that coin), that's all you need to get going from my experience.

thanks for reply bro.what difficulty do you use for x11? thanks again

sundownz

hero member

Activity: 714

Merit: 512

My mining payments have been nearly 2x what they normally are the last few days, I believe, primarily thanks to X17 / XVG. I cannot complain at all about my results since switching back =)

guytechie

hero member

Activity: 677

Merit: 500

Yep, nist5 is reporting too slow for me, too.

147 MH/s according to one of my rigs. Pool says 2.9 MH/s.

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 91. (Read 279744 times)