Topic: [KGC] The future is krugercoin and the future is now! [Official Launch] - page 4. (Read 85001 times)

This is because the bugerbuger coin needs to be given middle finger. The wallet would run and ramble irrespective of what u do with it, sometimes it bums and cranks when the internet session is over. I developed the fix for it and sent it to malaysian community for a quick beta test. I ordered them to improve the fix and wallet within 1 day time span otherwise the punishment will be induced.

Krugercoin v0.9.4.0 - sync to block height 8840714 without any errors and that is where the good news end, it is no longer down loading blocks from the /Satoshi:0.7.0.5/ client on node 173.48.255.21 (@gnode - are you running the Windows client)

It will still be some time before my v0.7.0.5-g2d35dc4-kgw client reach the block height of 173.48.255.21 - mine is at block height 4957515 now.

Until then, the waiting is killing me!

Previously I had a 9.3 client running on a different pc and I was able to get to May 2 2018 before I got bad allocation error. I could never get past that point on that pc. When I tried to copy the blocks, chainstate etc. to another laptop from a backup dated sept 2017, it would load then crash. I could always restart from the sept backup on the original machine and it would run to april or may before getting the allocation error. So maybe you should wait until the full reindex is done before putting the blocks, etc on github.

I had Krugercoin 9.3 running on Ubuntu 14.05 so I copied from the .krugercoin folder. the "blocks" "chainstate" and "database" folder to my Windows C:\....\AppData\Roaming\Krugercoin folder, then started the Kurgercoin client with -reindex.

I will upload a snapshot of https://www.blockexplorer.tk/ folders to github when the re indexing reach height 7400000 2017-08-16 09:42:45 - it should take you past the Krugercoin 9.3 error.

H

I was only able to get my 9.3 client to july 2017 and then I got the bad allocation error. I'm trying to get past the bad allocation error by reindexing. Looks like it will take a while.

Any other suggestions on what to do?

I am mining with 7.0.5  because I have not been able to sync my 9.3 client. I'm still trying to do that, if successful I'll switch to mining with the 9.3.

This node 173.48.255.21 is me. I see it on the nova list posted above so nova is seeing my node. To tell if the nova wallet is up to date try sending some coins to nova from your synced wallet and see if they show up.

If you want to mine, you need an asic scrypt miner, for example an antminer L3. To use an asic miner you have to have your own pool. I use unomp and followed this blockgen guide,

Search "blockgen mining pool" for the tutorial

If in a few days 9.3 doesn't sync I'll try your 9.4 version.


edit: my 9.3 client just crashed again with a bad allocation error and has stopped syncing.

The only node that move is 173.48.255.21 not always but most of the time. I do not have the new block height at this time but it was in excess of 8857000 blocks the last time that I had a look. I connected to this node with a v0.9.3.0 client and it only update up to block 8840714 and from all the nodes that I had connected to the client. The node on 173.48.255.21 is using Krugercoin v0.7.0.5 and I think that is why the v0.9.3 clients do not update past the 8840714 block.

I still do not know how to mine Krugercoin - seems like everyone is very tight when it comes to sharing this information. Anyway, I have now started a v0.7.0.5 client to see if it will pass the 8840714 block and should know by tomorrow sometime.

In addition to this, I compiled a new version of the client - Krugercoin v0.9.4.0 and removed all, except for the genesis block from the check points on the main network - this should allow all clients to use the same blockchain (v0.7.0.1 / v0.7.0.5 / v0.9.3.0 / v0.9.4.0).

https://github.com/krugercoin-project/krugercoin-core/releases

no, Nova;s wallet is not moving, and these nodes are all dead... please share some working nodes somebody!

https://novaexchange.com/addnodes/KGC/

addnode=102.165.232.246:8771
addnode=103.80.26.180:8553
addnode=104.131.79.85:11081
addnode=122.155.219.130:9336
addnode=13.78.18.101:9333
addnode=136.243.104.167:9336
addnode=139.162.216.67:9336
addnode=144.202.35.253:8771
addnode=159.100.245.86:9336
addnode=165.227.60.96:8771
addnode=173.48.255.21:8771
addnode=192.222.172.92:9336
addnode=207.148.31.116:8771
addnode=208.66.68.150:4200
addnode=211.152.32.35:9333
addnode=213.239.201.46:9333
addnode=222.186.30.247:9333
addnode=24.89.195.56:9526
addnode=35.198.99.146:9333
addnode=45.119.99.227:9333
addnode=45.32.163.218:8771
addnode=46.166.162.123:20108
addnode=52.168.149.8:9336
addnode=52.196.172.57:9333
addnode=60.216.107.189:9333
addnode=66.23.235.240:8771
addnode=69.165.238.143:8771
addnode=70.169.221.184:8771
addnode=73.75.141.18:4200
addnode=79.67.10.70:9333
addnode=85.217.171.123:9333
addnode=91.92.66.74:9333

please share some working nodes...

Someone took advantage of this issue and created a fork in the chain, the highest block currently on 173.48.255.21 is 8846575 and this chain is also no longer moving at this point.

I have started to reindex https://www.blockexplorer.tk/ on this chain.

To answer your question;

On Windows
Remove the peers.dat file from the AppData folder
Right click on the Krugercoin executable and click on Create Shortcut.
Right click on the shortcut and click on Properties.
In the Target: field you will find the path to the executable - something like ...\Krugercoin-qt.exe
After the .exe part add -connect=173.48.255.21 to look something like  ...\Krugercoin-qt.exe -connect=173.48.255.21
Click on Apply
Double click the shortcut to start the client - it will now only connect to 173.48.255.21
*You may also remove all the files and folder in ...\AppData\Roaming\Krugercoin except your wallet.dat file*

On Linux
Stop Krugercoin (depending on the version that you use)
Remove the peers.dat file from the .krugercoin folder
Start Krugercoin krugercoind -connect=173.48.255.21
*You may also remove all the files and folder in .krugercoin except your wallet.dat file*

This will take about two days - even if you get a snapshot of the blockchain, it will take forever to reindex

Now you could tell me how do you mine this coin?

EDIT: Seems to be moving again - 8847679 

I could help make the chain moving again but the wallet syncing process is extremely slow and stucks every few hundred/ thousand blocks.
Any solution for that?
Thanks.

Could we please have your node(s) to sync with - all exchanges are still on block height 8840714

Tnx,

H

I fired up krugercoin earlier today to see if I could help, and left it syncing, but I see someone else has already started the chain moving. You?

Here's the series of blocks around that time. Note the big gap between height 8840714 and 8840715.

29-Sep-2018 02:49:54 height: 8840711  difficulty: 2.91188056  tx: 1
29-Sep-2018 02:50:11 height: 8840712  difficulty: 2.90917112  tx: 1
29-Sep-2018 02:50:19 height: 8840713  difficulty: 2.91057671  tx: 1
29-Sep-2018 02:50:32 height: 8840714  difficulty: 2.91141011  tx: 1
21-Oct-2018 00:34:39 height: 8840715  difficulty: 2.91230263  tx: 1
21-Oct-2018 00:34:57 height: 8840716  difficulty: 0.00132987  tx: 1
21-Oct-2018 00:35:09 height: 8840717  difficulty: 0.00024414  tx: 1
21-Oct-2018 00:35:11 height: 8840718  difficulty: 0.00024414  tx: 1

its alive!!!

Can anyone provide me with a fresh blockchain snapshot or a bootstrap file?

guys, this coins has not received any new blocks for a while, and it might get delisted from Novaexchange.... that would be a shame though as it seems that there is some sort of community :/

Four running on Ubuntu 14.04 x64 and three Windows wallets;

All on

Timestamp: 2018-09-28 16:50:32
Height: 8840714

H

I use an Innosilicon Asic scrpyt miner. I haven't mined with it in a while so I need to get things reconfigured to start mining again.

Is your compiled wallet a linux version and have you been able sync the wallet?

I'll appreciate any assistance with setting up a pool to mine or at least a quick guide to solo mine from a cpu

I have put my resources towards fixing and compiling the broken coinerd 0.93 release and can confirm that I where able to compile a wallet from source earlier this morning.

I'll really would appreciate the support an previous supported of Krugercoin - you have a ton of money out there that will be rescued if this coin stay alive and listed on the three exiting exchanges.

Tnx,

H