Pages:
Author

Topic: Kialara Physical Bitcoins/HAVEN: Update - page 30. (Read 70639 times)

legendary
Activity: 2702
Merit: 1072
November 17, 2015, 02:55:58 PM
Max, thanks for the update to your outstanding orders. 

I am still appreciative that you reached out to me via another route because you saw pictures I had posted of my Kialara and noticed there may have been a defect in my piece which I confirmed was a dust speck that cropped into my pictures.   I also remember you were willing to reassemble it to make sure I was 100% satisfied.  Cool
hero member
Activity: 549
Merit: 788
November 17, 2015, 02:49:34 PM
"Max, if you really are honest, please follow this advice: Don't promise what you can't deliver."



These will be shipping this week. The image on the laptop is of this thread, so you can see this photo was just taken.

I understand there are some of you who have been waiting one-month + for your order. I'm sorry about this. I take quality very seriously. Those who know me well will tell you I'm a perfectionist. I've turned down many parts delivered to me, and it has cost me a small fortune. I have never scammed anyone and I never will. Period. I will try to work on my estimated turnaround times. The last time I began to fall behind I suspended sales, and I may do this again soon. When I eventually did reopen sales the orders flooded in and all I can say it that I'm working on it. Nights and weekends included. I have been shipping units out every week. Also, International orders eat up a lot of my time with additional paperwork, etc.

There is a lot of work that goes into each piece, and I've now assembled close to 2,000 units. That's around 64,000 individual pieces assembled, 24,000 applications of loc-tite and 24,000 screw heads drilled out. I eventually purchased a strong magnet to collect these small shavings:



I also discontinued sales of the 2014 edition so it's one less product to worry about, and I am working on a new project that has taken up some of my time recently as well. As I explained to someone else, I'm burning the candle at both ends and I just want to continue to deliver innovative products to my 'family'. That's what i consider each and every one of you.

Best regards,

Max-

P.S. This new project I'm working on... I'm slightly over budget on it already. I want to have all parts ordered and paid for before I open sales. I've never asked anyone to fund one of my creations through a crowd fund, etc., although I do open sales once my suppliers have collected so I can get that capital back to make my life easier and start on new projects.

I will be auctioning a small part of my collection today for this purpose - to help fill a few of my purchase orders for my new products.

Regarding my current designs - I have all inventory paid for and in stock. Time is my only issue and I'm working on it.

I sincerely appreciate each and every one of you who have supported me along the way. Much respect.



*Edit: I've temporarily suspended sales on my website until I've fulfilled all current orders.

*Edit #2: Auction posted https://bitcointalk.org/index.php?topic=1253386.new#new
newbie
Activity: 1
Merit: 0
November 17, 2015, 01:53:22 PM
Well, I think it's starting to look like Max has turned into a scammer.

I have been waiting months for my Kialara. He occasionally posts to say he is sorry about the delays and gives some lame excuses, and then writes that he has almost caught up. But, I'm beginning to think that he has just stopped production and no longer has any intention of making and shipping any more. Hopefully, he will return everyone's money.

I curious. How many people are waiting to receive their Kialara, and how long have you been waiting? Please post.

Here is his update 1 month ago:

Hi everyone, I've been shipping orders out all this week. As usual I have experienced many production issues, and I've resolved all of these issues - it just takes time as many of my parts come from overseas. And more often than not I have to eat the cost of the faulty products b/c with the relatively small volume I do a supplier would just assume drop me than take the hit themselves. It is getting better over time, and I'm working with some more reliable suppliers now. Also, I have a new product I'll be releasing soon. Managing this and keeping up with orders has been a challenge, as napalm mentioned, I'm a one-man show. I haven't slowed down any, just burning the candle at both ends. I'm close to catching up with all outstanding orders. As always your patience is greatly appreciated.
...

Well, you can't be that close if you still haven't orders from months ago.

Here is his update today. This time he says the problem is with configuring his work station and some of the materials. It is a different lame excuse every time.

Quote
Sorry for the late update. I’m still filling a handful of orders from soon after I reopened sales. I’m close to completing this next batch and that will fill most orders. Things began to get a little complicated b/c people are still purchasing my older designs so I’m constantly changing up my work station – there are lots of different parts for each design – many different sized screws, different drill bits, etc. I should be posting a shipping update in the next day or two. I ran into an additional issue with some of the engraved plates which I resolved, but it set me back another time. Getting there. Thank you again, Max.

Max, if you really are honest, please follow this advice: Don't promise what you can't deliver.
legendary
Activity: 2310
Merit: 1047
November 07, 2015, 02:40:12 PM
Well....
Hopefully if the pieces are workable, I wanted to make a 3D display - much like the photo from Max's blog.
It would be a shadow-box kind of thing. Hopefully backlit to help get a good perspective on all of the pieces.
I already have a box and have a couple of ideas of how to suspend/float the pieces.
If this works out, it will be all "woot, woot" Cheesy
Thanks Smiley


Id love to see such thing but i dont have the plastic holos anymore it took to me 5 minutes to discover the pkey maybe because of the emotions lol, eitherway it doesnt make those nice reflections.
legendary
Activity: 2310
Merit: 1047
November 07, 2015, 03:05:38 AM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
I loaded and declared it my crypto savings for the future, after busting all i had i ended up opening it in a moment of rage and yoloing what it had in... won and cashed out but i regret it so much. I also was few steps of winning the lb tournament but i fucked it up in last second

I won't be surprised if someone wants to buy some of the parts since its so unusual  Grin
I cannot take money after what i did with it so if anyone covers shopping from sweden ill send them for free. If it was the case, i think im keeping it i kinda have feelings for her .

I'd keep it if I were you. You'll go down in history as the first person to destroy redeem a Kialara Tongue.
i think im the second, but im not sure, i readed something about.
legendary
Activity: 1414
Merit: 1077
November 06, 2015, 05:36:53 PM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
I loaded and declared it my crypto savings for the future, after busting all i had i ended up opening it in a moment of rage and yoloing what it had in... won and cashed out but i regret it so much. I also was few steps of winning the lb tournament but i fucked it up in last second

I won't be surprised if someone wants to buy some of the parts since its so unusual  Grin
I cannot take money after what i did with it so if anyone covers shopping from sweden ill send them for free. If it was the case, i think im keeping it i kinda have feelings for her .

I'd keep it if I were you. You'll go down in history as the first person to destroy redeem a Kialara Tongue.
copper member
Activity: 3948
Merit: 2201
Verified awesomeness ✔
November 06, 2015, 05:31:43 PM
If minerjones didn't get it, I would have. Seems like a cool thing to have. Grin
legendary
Activity: 2310
Merit: 1047
November 06, 2015, 04:26:11 PM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
I loaded and declared it my crypto savings for the future, after busting all i had i ended up opening it in a moment of rage and yoloing what it had in... won and cashed out but i regret it so much. I also was few steps of winning the lb tournament but i fucked it up in last second

I won't be surprised if someone wants to buy some of the parts since its so unusual  Grin
I cannot take money after what i did with it so if anyone covers shopping from sweden ill send them for free. If it was the case, i think im keeping it i kinda have feelings for her .

PM sent.

Thanks Smiley
Thor and dr jones *sings*... ill check the price tomorrow im really tired now and didnt even turned on the pc today.
legendary
Activity: 2310
Merit: 1047
November 06, 2015, 03:25:25 AM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
I loaded and declared it my crypto savings for the future, after busting all i had i ended up opening it in a moment of rage and yoloing what it had in... won and cashed out but i regret it so much. I also was few steps of winning the lb tournament but i fucked it up in last second

I won't be surprised if someone wants to buy some of the parts since its so unusual  Grin
I cannot take money after what i did with it so if anyone covers shopping from sweden ill send them for free. If it was the case, i think im keeping it i kinda have feelings for her .
legendary
Activity: 1904
Merit: 1005
PGP ID: 78B7B84D
November 06, 2015, 02:53:44 AM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
I loaded and declared it my crypto savings for the future, after busting all i had i ended up opening it in a moment of rage and yoloing what it had in... won and cashed out but i regret it so much. I also was few steps of winning the lb tournament but i fucked it up in last second

I won't be surprised if someone wants to buy some of the parts since its so unusual  Grin
legendary
Activity: 2310
Merit: 1047
November 06, 2015, 12:41:46 AM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
I loaded and declared it my crypto savings for the future, after busting all i had i ended up opening it in a moment of rage and yoloing what it had in... won and cashed out but i regret it so much. I also was few steps of winning the lb tournament but i fucked it up in last second
hero member
Activity: 578
Merit: 554
November 05, 2015, 07:07:37 PM
I'm so curious as to why you decided to open it. Was it loaded and you wanted the BTC or were you just curious how hard it was to open up?
copper member
Activity: 3948
Merit: 2201
Verified awesomeness ✔
November 05, 2015, 06:39:21 PM
That should be tagged as gore!
legendary
Activity: 2310
Merit: 1047
November 05, 2015, 05:57:21 PM
Im not proud at all that i ended opening my kialara but i give to you the fact that it took to me about half hour to open it. Its beautifully made and ill get another one as soon as i can.

wtf, that is gangsta, man...got some pics?
Actually i feelt so bad about it i have every single piece of it... except the crystal. If you want i can get some pics gimme a moment.
Edit: Here is it, i found after the small btc thing that goes in the middle but already put everything back in place so skipped doing another pic.
full member
Activity: 194
Merit: 100
November 05, 2015, 05:51:47 PM
Im not proud at all that i ended opening my kialara but i give to you the fact that it took to me about half hour to open it. Its beautifully made and ill get another one as soon as i can.

wtf, that is gangsta, man...got some pics?
legendary
Activity: 2310
Merit: 1047
November 05, 2015, 05:43:32 PM
Im not proud at all that i ended opening my kialara but i give to you the fact that it took to me about half hour to open it. Its beautifully made and ill get another one as soon as i can.
legendary
Activity: 1456
Merit: 1000
November 05, 2015, 04:10:43 PM
It seems that Max is pretty busy lately as he hasn't responded to a PM of mine that I sent somewhere last week/begin this week.

Hi everyone, I've been shipping orders out all this week. As usual I have experienced many production issues, and I've resolved all of these issues - it just takes time as many of my parts come from overseas. And more often than not I have to eat the cost of the faulty products b/c with the relatively small volume I do a supplier would just assume drop me than take the hit themselves. It is getting better over time, and I'm working with some more reliable suppliers now. Also, I have a new product I'll be releasing soon. Managing this and keeping up with orders has been a challenge, as napalm mentioned, I'm a one-man show. I haven't slowed down any, just burning the candle at both ends. I'm close to catching up with all outstanding orders. As always your patience is greatly appreciated.

Pistachio, regarding the labyrinths, the ones with silver bearings are still shipping, although if you place an order and request ceramic I'm happy to send one of those.

Max-

Looking forward to the new product.

Edit:. Placed a second order with btc. Please use the ceramic bearings (Order Number 5VXA4PCP). Thanks.
copper member
Activity: 3948
Merit: 2201
Verified awesomeness ✔
November 05, 2015, 02:32:54 PM
Thank you for the update Max, I really appreciate it and I hope everything works out for you as well.
hero member
Activity: 549
Merit: 788
November 05, 2015, 02:22:34 PM
It seems that Max is pretty busy lately as he hasn't responded to a PM of mine that I sent somewhere last week/begin this week.

Hi everyone, I've been shipping orders out all this week. As usual I have experienced many production issues, and I've resolved all of these issues - it just takes time as many of my parts come from overseas. And more often than not I have to eat the cost of the faulty products b/c with the relatively small volume I do a supplier would just assume drop me than take the hit themselves. It is getting better over time, and I'm working with some more reliable suppliers now. Also, I have a new product I'll be releasing soon. Managing this and keeping up with orders has been a challenge, as napalm mentioned, I'm a one-man show. I haven't slowed down any, just burning the candle at both ends. I'm close to catching up with all outstanding orders. As always your patience is greatly appreciated.

Pistachio, regarding the labyrinths, the ones with silver bearings are still shipping, although if you place an order and request ceramic I'm happy to send one of those.

Max-
copper member
Activity: 3948
Merit: 2201
Verified awesomeness ✔
November 05, 2015, 03:03:51 AM
It seems that Max is pretty busy lately as he hasn't responded to a PM of mine that I sent somewhere last week/begin this week.
Pages:
Jump to: