Topic: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE - page 8. (Read 30104 times)
October 07, 2017, 06:36:00 AM
CUDA 9 x86 the fastest.
October 07, 2017, 05:47:06 AM
Inno3D GTX1080 PL 80
CUDA 8 x64
3476H/s
66C (F;65%) ) 1640/ 4513 MHz (127W)
CUDA 9 x64
3700H/s
66C (F;65%) ) 1640/ 4513 MHz (127W)
CUDA 8 x64
3476H/s
66C (F;65%) ) 1640/ 4513 MHz (127W)
CUDA 9 x64
3700H/s
66C (F;65%) ) 1640/ 4513 MHz (127W)
October 07, 2017, 03:55:14 AM
It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit
You're absolutely right, even last night it was more profitable than this morning. Amazing...Diff have come up 2x compare with last week.
October 07, 2017, 03:18:20 AM
It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit
You're absolutely right, even last night it was more profitable than this morning. Amazing... October 07, 2017, 03:04:53 AM
It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit
October 07, 2017, 03:02:13 AM
Can you put a version number in the source code and the name of this topic ?
It's will be easier to understand for the future of this good program.
I have made a lot of try, but I still not fund a very profitable setting with xevan mining (GTX 1070).
What do you consider very profitable? I didn't expect it to make 50 bucks a day. It's will be easier to understand for the future of this good program.
I have made a lot of try, but I still not fund a very profitable setting with xevan mining (GTX 1070).
October 07, 2017, 02:25:25 AM
Can you put a version number in the source code and the name of this topic ?
It's will be easier to understand for the future of this good program.
I have made a lot of try, but I still not fund a very profitable setting with xevan mining (GTX 1070).
It's will be easier to understand for the future of this good program.
I have made a lot of try, but I still not fund a very profitable setting with xevan mining (GTX 1070).
October 07, 2017, 12:19:35 AM
where to find the 9.0 binary?
https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w
CUDA 9 built project, feel free to test. Start with intensity 18.
So weird that the one on github does not get flagged up as a virus but this one does? (false positive, I know)
It's packed, so it gets flagged.
I'm obviously not questioning your integrity but found it a bit strange. Is the one github not packed? Have you introduced a fee by any chance? Thanks for your time.
No fees, it's krnlx code, it's opensource and should stay free. I've just packed executables to take less space on my mega.nz, I keep quite big data there, so space matters in this case, even 50 mb
One on github is not packed.P.S: don't run miner on yiimp with "-p stats" option, it will fail just after pool asks for stats.
October 06, 2017, 11:52:25 PM
the coins are pretty small so expect profitability to stabilize around average profitability...its kinda sad to be honest. Heres hoping to see a new ZCash some day with a new algo 
I mined and hold 20k SIGT, but it is going to die. So I think holding small coin is risky, now I exchange BSD to BTC daily.
Oh, good old sigt. Worthless
I've been mining Bitsend all night long on suprnova but my balance is still not confirmed. Does it really take so long?
October 06, 2017, 09:36:23 PM
the coins are pretty small so expect profitability to stabilize around average profitability...its kinda sad to be honest. Heres hoping to see a new ZCash some day with a new algo
I mined and hold 20k SIGT, but it is going to die. So I think holding small coin is risky, now I exchange BSD to BTC daily.
October 06, 2017, 09:22:48 PM
the coins are pretty small so expect profitability to stabilize around average profitability...its kinda sad to be honest. Heres hoping to see a new ZCash some day with a new algo
October 06, 2017, 07:24:43 PM
finally... the wallet has been synchronized and the miner does work. 6 x 1070 ~ 20 MH/s
Profitability is about like for BTX/VIVO. Not too bad, but still less than my favorite coin
Profitability is about like for BTX/VIVO. Not too bad, but still less than my favorite coin
October 06, 2017, 06:57:26 PM
where to find the 9.0 binary?
https://mega.nz/#F!RtYS0KwY!FGxr0uBWo1nZBSqBWkFx0w
CUDA 9 built project, feel free to test. Start with intensity 18.
October 06, 2017, 06:43:06 PM
Did you set the intensity manually?
Quote
UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti
As far as I see the answer is no. There may be your problem.yes, I did:
Quote
ccminer -a xevan -i 20 -o stratum+tcp://eu1.altminer.net:3739 -u Vo...Z -p c=VSX
the same result. I use 1070.Update: something wrong with my wallet. If I use the wallet id from any recorded transaction, it works! but any addresses from my wallet - they look like invalid for the pool. Any ideas???
I use VSYNC wallet v1.2.3.0-g32a928e
Update: crap, apparently there are two VSYNCs! Downloaded another VSync v 1.0.0.1 and synchronizing...
October 06, 2017, 06:20:29 PM
It's alexis78 base, optimised for cuda 7.5, so it should be faster. Try x86 build, it's generally faster in CUDA8 not specifically optimised case, or build your own binaries, experiment
No, I love those wattage and temp monitoring in x64 builds so x86 build is not for me ))And my binary is only 20mb ... yours is 37 ... why?
How do you check wattage and temp on ccminer?
October 06, 2017, 03:47:34 PM
Windows x64 version, EVGA GTX 1060 + 80 / + 500 / 84% tdp (I didnt change intensity, worked on default = 20): 2240kh/s in benchmark mode.
It works, thank you
It works, thank you
October 06, 2017, 03:40:12 PM
Your great Work resulted :
Xubuntu 16.04 LTS
Cuda 9
Nv 384.90
i=20.25
thx Guys for The Miner
Xubuntu 16.04 LTS
Cuda 9
Nv 384.90
i=20.25
Code:
[2017-10-06 22:35:34] GPU#0:NONCE FOUND
[2017-10-06 22:35:34] GPU#0:MSI GTX 1050, 1113.18kH/s
[2017-10-06 22:35:34] GPU#0:MSI GTX 1050, 0.018MH/W, 0.00063MH/Mhz
[2017-10-06 22:35:34] GPU#0:MSI GTX 1050, 62C(F:56%) 1766/3504MHz(63W)
[2017-10-06 22:35:34] GPU#0:target 0 22c92492 1c9
[2017-10-06 22:35:34] GPU#0:target 1c922c92492
[2017-10-06 22:35:34] [S/A/T]: 0/78/80, diff: 0.004, 1110.65kH/s yes!
[2017-10-06 22:35:34] GPU#0:MSI GTX 1050, 1113.18kH/s
[2017-10-06 22:35:34] GPU#0:MSI GTX 1050, 0.018MH/W, 0.00063MH/Mhz
[2017-10-06 22:35:34] GPU#0:MSI GTX 1050, 62C(F:56%) 1766/3504MHz(63W)
[2017-10-06 22:35:34] GPU#0:target 0 22c92492 1c9
[2017-10-06 22:35:34] GPU#0:target 1c922c92492
[2017-10-06 22:35:34] [S/A/T]: 0/78/80, diff: 0.004, 1110.65kH/s yes!
thx Guys for The Miner
October 06, 2017, 03:37:17 PM
1080 hashrate. not ti.
Code:
[S/A/T]: 0/151/151, diff: 0.065, 3794.39kH/s yes!
[S/A/T]: 0/152/152, diff: 0.020, 3794.27kH/s yes!
GPU#0:EVGA GTX 1080, 3799.83kH/s
[S/A/T]: 0/152/152, diff: 0.020, 3794.27kH/s yes!
GPU#0:EVGA GTX 1080, 3799.83kH/s
October 06, 2017, 03:29:03 PM
anybody can tell me what I am doing wrong?
When I start the miner with altminer config like this:
WTF??? coin code is correct, wallet address is correct, startum address is correct, so why it complains???
Did you set the intensity manually?When I start the miner with altminer config like this:
Code:
ccminer_x86 -a xevan -o stratum+tcp://eu1.altminer.net:3739 -u Vo...Z -p c=VSX
Windows 10
it always gives me an error message:Windows 10
Code:
[2017-10-06 13:59:06] Starting on stratum+tcp://eu1.altminer.net:3739
[2017-10-06 13:59:06] NVAPI GPU monitoring enabled.
[2017-10-06 13:59:06] 6 miner threads started, using 'xevan' algorithm.
[2017-10-06 13:59:07] Stratum authentication failed
[2017-10-06 13:59:07] ...retry after 30 seconds
[2017-10-06 13:59:06] NVAPI GPU monitoring enabled.
[2017-10-06 13:59:06] 6 miner threads started, using 'xevan' algorithm.
[2017-10-06 13:59:07] Stratum authentication failed
[2017-10-06 13:59:07] ...retry after 30 seconds
WTF??? coin code is correct, wallet address is correct, startum address is correct, so why it complains???
Quote
UPD. For 1060 cards intensity sets up incorrectly - you must adjust it with -i param. -i 20 is best for 1070, 1080ti
As far as I see the answer is no. There may be your problem. October 06, 2017, 03:19:46 PM
On linux with CUDA 9 & compile with sm61, 6x1080ti (each power limit 170w) reported hash rate is 30Mh/s. Default intensity.
According to whattomine that hash rate should yield about 1.47 BSD per hour, but the actual shown on pool earning is only 0.8 BSD. Tested on suprnova pool.
According to whattomine that hash rate should yield about 1.47 BSD per hour, but the actual shown on pool earning is only 0.8 BSD. Tested on suprnova pool.
Jump to: