Is rico666 still active in his development of this project? He left the Burst community in not so good terms but his and his team's cleaning up of the Burst codebase is appreciated. I would like to know what other projects hes been busy doing.
Topic: Large Bitcoin Collider (Collision Finders Pool) - page 2. (Read 193481 times)
Have you ever find any address with even a few satoshi in it? but lets assume that someday some one lucky enough finds one collision then what? next thing is going to take a few months or even years? this is like gathering thousands of keys and going on the street and test them one by one on every car and house to see if one of them could open a door to steal the car or steal from the house.
No never found anything. Of course there are empty yellow addresses scattered in the first 100 pages, and on the last page. But nobody ever leaves btc in them.
I liken the process to hunting for a specific atom on the moon.. Its like the world's worst lottery. Still, you can't win if you don't play.
Have you ever find any address with even a few satoshi in it? but lets assume that someday some one lucky enough finds one collision then what? next thing is going to take a few months or even years? this is like gathering thousands of keys and going on the street and test them one by one on every car and house to see if one of them could open a door to steal the car or steal from the house.
I have to admit I enjoy rooting around on keys.lol and it is interesting to determine how they calculate what is going to be on each page. I would think in the unlikely event that somebody does come across a "green" entry, they have a tool that would automatically grab the key and import it into their own wallet.
If you know the first 90% of the key, you could theoretically use that website to find the last 10%... Even though it might still take days or months.
If you know the first 90% of the key, you could theoretically use that website to find the last 10%... Even though it might still take days or months.
thank you for unmask a scammer which build directory.io!
I did not say it was a scam - because it is not a scam.
I said it was a joke - because it is a joke.
What happened to puzzle transaction #55? No trophy, no collision, just on to the next one?
Also if we are checking against bloom filter of known addresses with positive balances how are we specifically targeting any particular address ie any puzzle transaction at all? Is it the complexity of the private key that is supposedly wildly basic/uncomplex and therefore most likely to be the next find?
How often is directory.io updated? I still have some pages I'd like to check but I'm about ready for some new material
Just airing out my stupid for a little bit, thanks for the smax
The puzzle transaction transactions are a known quantity. Each one uses one more bit in the private key. Since LBC is sequentially searching the private key space they will eventually find each puzzle transaction as they search. Finding each one is just a benchmark as LBC progresses through the private key space, that is all. LBC is not looking for the puzzle transactions specifically. It is just known that they will be found and approximately how long it will be till the next one is found.Also if we are checking against bloom filter of known addresses with positive balances how are we specifically targeting any particular address ie any puzzle transaction at all? Is it the complexity of the private key that is supposedly wildly basic/uncomplex and therefore most likely to be the next find?
How often is directory.io updated? I still have some pages I'd like to check but I'm about ready for some new material
Just airing out my stupid for a little bit, thanks for the smax
directory.io is a joke. It is not "updated" because it does not really exist in the sense of a database. All it does is calculate the information on the fly. When you enter a page number it just calculates all the information for that page at the time it presents the information to you. There is no database. But yes, you can enter a page number and it will calculate that page for you.
thank you for unmask a scammer which build directory.io!
Hi, Newbie here... can't seem to get past step No. 8, been getting
XS.c: loadable library and perl binaries are mismatched (got handshake key 0xdb80080, needed 0xde00080
Need help.
XS.c: loadable library and perl binaries are mismatched (got handshake key 0xdb80080, needed 0xde00080
Need help.
Thanks BurtW for the informative reply. So what happened to #55? I do get a kick out of directory.io
What happened to puzzle transaction #55? No trophy, no collision, just on to the next one?
Also if we are checking against bloom filter of known addresses with positive balances how are we specifically targeting any particular address ie any puzzle transaction at all? Is it the complexity of the private key that is supposedly wildly basic/uncomplex and therefore most likely to be the next find?
How often is directory.io updated? I still have some pages I'd like to check but I'm about ready for some new material
Just airing out my stupid for a little bit, thanks for the smax
The puzzle transaction transactions are a known quantity. Each one uses one more bit in the private key. Since LBC is sequentially searching the private key space they will eventually find each puzzle transaction as they search. Finding each one is just a benchmark as LBC progresses through the private key space, that is all. LBC is not looking for the puzzle transactions specifically. It is just known that they will be found and approximately how long it will be till the next one is found.Also if we are checking against bloom filter of known addresses with positive balances how are we specifically targeting any particular address ie any puzzle transaction at all? Is it the complexity of the private key that is supposedly wildly basic/uncomplex and therefore most likely to be the next find?
How often is directory.io updated? I still have some pages I'd like to check but I'm about ready for some new material
Just airing out my stupid for a little bit, thanks for the smax
directory.io is a joke. It is not "updated" because it does not really exist in the sense of a database. All it does is calculate the information on the fly. When you enter a page number it just calculates all the information for that page at the time it presents the information to you. There is no database. But yes, you can enter a page number and it will calculate that page for you.
What happened to puzzle transaction #55? No trophy, no collision, just on to the next one?
Also if we are checking against bloom filter of known addresses with positive balances how are we specifically targeting any particular address ie any puzzle transaction at all? Is it the complexity of the private key that is supposedly wildly basic/uncomplex and therefore most likely to be the next find?
How often is directory.io updated? I still have some pages I'd like to check but I'm about ready for some new material
Just airing out my stupid for a little bit, thanks for the smax
Also if we are checking against bloom filter of known addresses with positive balances how are we specifically targeting any particular address ie any puzzle transaction at all? Is it the complexity of the private key that is supposedly wildly basic/uncomplex and therefore most likely to be the next find?
How often is directory.io updated? I still have some pages I'd like to check but I'm about ready for some new material
Just airing out my stupid for a little bit, thanks for the smax
to install
Quote
sudo apt-get update
sudo apt-get upgrade
sudo apt-get update && sudo apt-get -y upgrade
sudo apt-get install -y linux-image-extra-`uname -r`
sudo apt install perl bzip2 xdelta3 libgmp-dev libssl-dev gcc make
sudo apt-get install gcc make tmux libssl-dev xdelta3 nvidia-384 nvidia-cuda-toolkit
sudo cpan install OpenCL
sudo cpan force install JSON
sudo cpan force install LWP
sudo cpan force install Parallel::ForkManager
sudo cpan force install Net::SSLeay
sudo cpan force install LWP::Protocol::https
sudo cpan force install Parallel::ForkManager
sudo cpan force install Term::ReadKey
sudo apt-get install libnet-ssleay-perl
sudo apt-get install libcrypt-ssleay-perl
sudo apt-get install LWP::Protocol::https
sudo apt-get install Parallel::ForkManager
sudo apt-get install Term::ReadKey
sudo apt install ocl-icd-opencl-dev
sudo apt-get dist-upgrade -y
sudo reboot
sudo ./LBC -h
sudo ./LBC -x
sudo apt-get upgrade
sudo apt-get update && sudo apt-get -y upgrade
sudo apt-get install -y linux-image-extra-`uname -r`
sudo apt install perl bzip2 xdelta3 libgmp-dev libssl-dev gcc make
sudo apt-get install gcc make tmux libssl-dev xdelta3 nvidia-384 nvidia-cuda-toolkit
sudo cpan install OpenCL
sudo cpan force install JSON
sudo cpan force install LWP
sudo cpan force install Parallel::ForkManager
sudo cpan force install Net::SSLeay
sudo cpan force install LWP::Protocol::https
sudo cpan force install Parallel::ForkManager
sudo cpan force install Term::ReadKey
sudo apt-get install libnet-ssleay-perl
sudo apt-get install libcrypt-ssleay-perl
sudo apt-get install LWP::Protocol::https
sudo apt-get install Parallel::ForkManager
sudo apt-get install Term::ReadKey
sudo apt install ocl-icd-opencl-dev
sudo apt-get dist-upgrade -y
sudo reboot
sudo ./LBC -h
sudo ./LBC -x
Intel is on-board and will get the same speed as CPU.
You can only really use the Nvidia card.
You can only really use the Nvidia card.
I see... great thank you once again!
If I recall correctly, the initial test only uses CPU.
Try running it for real and see if you get different results.
I see... I have test it the last 2 days but I'm not sure how better is running that before with only CPU.
While trying to run my machine at maximum power, I have notice that there are gpu options which I do not understand well how to use them.
I have 2 gpu on my machine, 1 intel and 1 nvidia.
This is the command I'm using right now:
Code:
./LBC -id username -s password --gpu -c 4 -t 600 -delay 180
I guess using the command above it's not using both gpu or maybe use intel which has less power than nvidia.
How to use both gpu? Or if I had to use only 1 gpu, then how to know is using the best which is nvidia?
*Also at manual it's says that e.g. -t 10 = 10 minutes, as far I test it -t 60 = 5 minutes, maybe is a bug?
Also try it with 1:0, it gives me the same results.
What I want is to give it a delay 3 minutes after 1 hour running.
Thanks again.
Intel is on-board and will get the same speed as CPU.
You can only really use the Nvidia card.
If I recall correctly, the initial test only uses CPU.
Try running it for real and see if you get different results.
I see... I have test it the last 2 days but I'm not sure how better is running that before with only CPU.
While trying to run my machine at maximum power, I have notice that there are gpu options which I do not understand well how to use them.
I have 2 gpu on my machine, 1 intel and 1 nvidia.
This is the command I'm using right now:
Code:
./LBC -id username -s password --gpu -c 4 -t 600 -delay 180
I guess using the command above it's not using both gpu or maybe use intel which has less power than nvidia.
How to use both gpu? Or if I had to use only 1 gpu, then how to know is using the best which is nvidia?
*Also at manual it's says that e.g. -t 10 = 10 minutes, as far I test it -t 60 = 5 minutes, maybe is a bug?
Also try it with 1:0, it gives me the same results.
What I want is to give it a delay 3 minutes after 1 hour running.
Thanks again.
You have to set a secret (Password) but you also might still have to be on the GPU list.
You will have to ask Rico.
You have absolutely right. I set password and gpu has been authorized thank you!
Code:
GPU authorized: yes
Will use 4 CPUs.
Ask for work... got blocks [33644116996-33644119619] (2751 Mkeys)
2 just got out of the pool with exit code: 255
1 just got out of the pool with exit code: 255
0 just got out of the pool with exit code: 255
3 just got out of the pool with exit code: 255
Sending invalidation info.
However even if I have enable gpu, the speed is the same when I make a test.
Code:
./LBC -x
Will use 4 CPUs.
Testing mode. Using page 0, turning off looping.
Benchmark info not found - benchmarking... done.
Your speed is roughly 797883 keys/s per CPU core.
o
Test ok. Your test results were stored in FOUND.txt.
Have a look and then you may want to remove the file.
2d17543d32448acc7a1c43c5f72cd5be459ab302:u:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x5e
02e62151191a931d51cdc513a86d4bf5694f4e51:c:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x65
9d74ffdb31068ca2a1feb8e34830635c0647d714:u:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
3d6871076780446bd46fc564b0c443e1fd415beb:c:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
Ending test run.
Same speed I had before enable gpu, why speed isn't increased?
Thanks in advance.
If I recall correctly, the initial test only uses CPU.
Try running it for real and see if you get different results.
You have to set a secret (Password) but you also might still have to be on the GPU list.
You will have to ask Rico.
You have absolutely right. I set password and gpu has been authorized thank you!
Code:
GPU authorized: yes
Will use 4 CPUs.
Ask for work... got blocks [33644116996-33644119619] (2751 Mkeys)
2 just got out of the pool with exit code: 255
1 just got out of the pool with exit code: 255
0 just got out of the pool with exit code: 255
3 just got out of the pool with exit code: 255
Sending invalidation info.
However even if I have enable gpu, the speed is the same when I make a test.
Code:
./LBC -x
Will use 4 CPUs.
Testing mode. Using page 0, turning off looping.
Benchmark info not found - benchmarking... done.
Your speed is roughly 797883 keys/s per CPU core.
o
Test ok. Your test results were stored in FOUND.txt.
Have a look and then you may want to remove the file.
2d17543d32448acc7a1c43c5f72cd5be459ab302:u:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x5e
02e62151191a931d51cdc513a86d4bf5694f4e51:c:priv:0000000000000000000000000000000000000000000000000000000000000001 + 0x65
9d74ffdb31068ca2a1feb8e34830635c0647d714:u:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
3d6871076780446bd46fc564b0c443e1fd415beb:c:priv:00000000000000000000000000000000000000000000000000000000000f9001 + 0xf8c
Ending test run.
Same speed I had before enable gpu, why speed isn't increased?
Thanks in advance.
Hello,
I have just installed on linux machine, works fine except that is not authorize my CPU.
My Nvidia drivers are already installed.
I have install "nvidia-driver-390" driver.
My gpu is not supported or I have done something wrong?
Thanks in advance!
I have just installed on linux machine, works fine except that is not authorize my CPU.
Code:
./LBC --gpu
GPU authorized: no
Will use 4 CPUs.
Ask for work... Server doesn't like us. Answer: wrong secret.
My Nvidia drivers are already installed.
Code:
ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd0000139Bsv000017AAsd00003802bc03sc02i00
vendor : NVIDIA Corporation
model : GM107M [GeForce GTX 960M]
driver : nvidia-driver-390 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
I have install "nvidia-driver-390" driver.
My gpu is not supported or I have done something wrong?
Thanks in advance!
You have to set a secret (Password) but you also might still have to be on the GPU list.
You will have to ask Rico.
Hello,
I have just installed on linux machine, works fine except that is not authorize my CPU.
My Nvidia drivers are already installed.
I have install "nvidia-driver-390" driver.
My gpu is not supported or I have done something wrong?
Thanks in advance!
I have just installed on linux machine, works fine except that is not authorize my CPU.
Code:
./LBC --gpu
GPU authorized: no
Will use 4 CPUs.
Ask for work... Server doesn't like us. Answer: wrong secret.
My Nvidia drivers are already installed.
Code:
ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd0000139Bsv000017AAsd00003802bc03sc02i00
vendor : NVIDIA Corporation
model : GM107M [GeForce GTX 960M]
driver : nvidia-driver-390 - distro non-free recommended
driver : xserver-xorg-video-nouveau - distro free builtin
I have install "nvidia-driver-390" driver.
My gpu is not supported or I have done something wrong?
Thanks in advance!
When stopping LBC in terminal during sleep period, Ctrl+C gives me "stop gracefully by using ^e" or something like that, yet Ctrl+C still achieves my purpose and even says notifies host of not finishing homework or whatever which makes me feel better. Tried Ctrl+E didn't do anything.
Please help me gracefully exit the LBC when I desire.
Tbh the pool is renewing my interest in linux, however my knowledge of keyboard shortcuts and the finer details of the OS are eluding me, I just wanna get my CPU's down and dirty collidin-n-findin
Thanks,
-J
Please help me gracefully exit the LBC when I desire.
Tbh the pool is renewing my interest in linux, however my knowledge of keyboard shortcuts and the finer details of the OS are eluding me, I just wanna get my CPU's down and dirty collidin-n-findin
Thanks,
-J
Yeah, CTRL+E works it just takes a really long time to finally end.
It has to finish all the work on all the cores first and submit it.
Jump to: