Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner - page 129.

Albortz

sr. member

Activity: 420

Merit: 250

Tax Attorney - Investor - Entrepreneur

I got the same problem.

After I lost a couple miners in the last days, today my payout dropped from 0,01-0,015BTC/day to 0,005BTC/day...

But well right now 100% of my machines are offline due to whatever reason Roll Eyes

diversify in miner they said; its gone be hassle free, fun and profitable they said....

bigmaq

member

Activity: 61

Merit: 10

Quote from: GMPoison on August 25, 2017, 04:13:43 PM

Quote from: bigmaq on August 25, 2017, 04:11:23 PM

anyone else notice a sharp drop in nicehash profitibilty today for scrypt mining? My dashboard is showing a drop of 50% ... this is crazy!!

The nicehash profit calculator still reports profits of $1600/mo for one L3+ which is twice it's actual profits ($800/mo).

Has something happened to nicehash? You're not the first to report this today.

I have 16 L3+ machines connected to nicehash ... was getting profitibility of 0.14-0.16 bitcoin per day ... which was pretty much what was predicted on the dashboard, since the payout this morning my expected profitibilty shows as 0.08-0.10 bitcoin for the next 24 hours no change with machines etc .. Hash speeds are between 7500 - 8300 (total of 16 machines).

GMPoison

sr. member

Activity: 434

Merit: 250

Quote from: bigmaq on August 25, 2017, 04:11:23 PM

anyone else notice a sharp drop in nicehash profitibilty today for scrypt mining? My dashboard is showing a drop of 50% ... this is crazy!!

The nicehash profit calculator still reports profits of $1600/mo for one L3+ which is twice it's actual profits ($800/mo).

Has something happened to nicehash? You're not the first to report this today.

bigmaq

member

Activity: 61

Merit: 10

anyone else notice a sharp drop in nicehash profitibilty today for scrypt mining? My dashboard is showing a drop of 50% ... this is crazy!!

QuintLeo

legendary

Activity: 1498

Merit: 1030

Constantly, no - but I did get ONE such email a little while back.

shoaib39

member

Activity: 136

Merit: 10

Nice hash sucks..... Don't know what happened, Profile Fall to very low. Lower than LTC mining.

LTCbusiness

newbie

Activity: 53

Merit: 0

Quote from: GMPoison on August 25, 2017, 12:32:53 PM

Quote from: LTCbusiness on August 25, 2017, 10:38:23 AM

Guys, anyone here are able to change the payment from Bank Wire to Bitcoin/Litecon after contacting the Bitmain support? I would love to make the bank wire, but my stupid bank requires so many documents and Bitmain only give me a tiny Proforma Invoice, which is not enough. I tried to contact Bitmain support but I really does not expect the to reply soon, usually it took them 3-5 days to reply some of my tickets.

If your bank tells you who you can and cannot purchase completely legal computer hardware from, or how much of your own money you can and cannot spend without providing multiple documents, I would find a different bank.

Ya, it sucks, but I tried with 3 different banks today, 1 is standard chartered 1 big and 1 medium size bank, all said the same thing about the documents like a legal importing contract, which Bitmain may not provide. I really hope they can change the payment method to bitcoin, it is much easier, really.

GMPoison

sr. member

Activity: 434

Merit: 250

Quote from: CryptoCrane on August 25, 2017, 03:18:35 PM

Quote from: GMPoison on August 25, 2017, 02:27:00 PM

Quote from: Albortz on August 25, 2017, 02:11:20 PM

Quote from: GMPoison on August 25, 2017, 02:03:48 PM

Quote from: CryptoCrane on August 25, 2017, 01:58:28 PM

Quote from: mano237 on August 25, 2017, 09:41:38 AM

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

Definitely looks like a good PSU option if you have 220v power. Doesn't work over 110v though. "INPUT:180V--264V"

Do you have any experience running two L3+'s off a single 1800w PSU? Each L3+ consumes 800w +10%, so do you have to underclock them to get two to run off a single 1800w PSU? Can you even still underclock/overclock them? I read somewhere that their firmware doesn't allow for it anymore, but I remember mining years ago with Antminers and I could underclock/overclock them as I wished.

You can still over clock the L3+ and under clocking is also possible.

In real life the miner takes around 800W with the APW3+ model. So just the miner runs probably a little less than that.

1800 should be more than enough to run 2 l3+. If you overclock them on 600 MH+ you should definitely run them on 2 PSU

I see. I was just curious because on the Bitmain website under the L3+ specifications it literally says "800W +10%", which wouldn't leave nearly enough room to run two of them off a single 1800w PSU.

Check out this video. It shows the actual power usage for an L3+ with 220v as well as 110v.

Thanks for that! You should make more videos, they're really well made. I'm sure plenty of people out there are looking for quality crypto related channels on youtube (myself included), especially reviews and such of crypto related hardware.

CryptoCrane

sr. member

Activity: 384

Merit: 256

Quote from: GMPoison on August 25, 2017, 02:27:00 PM

Quote from: Albortz on August 25, 2017, 02:11:20 PM

Quote from: GMPoison on August 25, 2017, 02:03:48 PM

Quote from: CryptoCrane on August 25, 2017, 01:58:28 PM

Quote from: mano237 on August 25, 2017, 09:41:38 AM

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

Definitely looks like a good PSU option if you have 220v power. Doesn't work over 110v though. "INPUT:180V--264V"

Do you have any experience running two L3+'s off a single 1800w PSU? Each L3+ consumes 800w +10%, so do you have to underclock them to get two to run off a single 1800w PSU? Can you even still underclock/overclock them? I read somewhere that their firmware doesn't allow for it anymore, but I remember mining years ago with Antminers and I could underclock/overclock them as I wished.

You can still over clock the L3+ and under clocking is also possible.

In real life the miner takes around 800W with the APW3+ model. So just the miner runs probably a little less than that.

1800 should be more than enough to run 2 l3+. If you overclock them on 600 MH+ you should definitely run them on 2 PSU

I see. I was just curious because on the Bitmain website under the L3+ specifications it literally says "800W +10%", which wouldn't leave nearly enough room to run two of them off a single 1800w PSU.

Check out this video. It shows the actual power usage for an L3+ with 220v as well as 110v.

GMPoison

sr. member

Activity: 434

Merit: 250

Quote from: Albortz on August 25, 2017, 02:11:20 PM

Quote from: GMPoison on August 25, 2017, 02:03:48 PM

Quote from: CryptoCrane on August 25, 2017, 01:58:28 PM

Quote from: mano237 on August 25, 2017, 09:41:38 AM

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

Definitely looks like a good PSU option if you have 220v power. Doesn't work over 110v though. "INPUT:180V--264V"

Do you have any experience running two L3+'s off a single 1800w PSU? Each L3+ consumes 800w +10%, so do you have to underclock them to get two to run off a single 1800w PSU? Can you even still underclock/overclock them? I read somewhere that their firmware doesn't allow for it anymore, but I remember mining years ago with Antminers and I could underclock/overclock them as I wished.

You can still over clock the L3+ and under clocking is also possible.

In real life the miner takes around 800W with the APW3+ model. So just the miner runs probably a little less than that.

1800 should be more than enough to run 2 l3+. If you overclock them on 600 MH+ you should definitely run them on 2 PSU

I see. I was just curious because on the Bitmain website under the L3+ specifications it literally says "800W +10%", which wouldn't leave nearly enough room to run two of them off a single 1800w PSU.

Albortz

sr. member

Activity: 420

Merit: 250

Tax Attorney - Investor - Entrepreneur

Quote from: GMPoison on August 25, 2017, 02:03:48 PM

Quote from: CryptoCrane on August 25, 2017, 01:58:28 PM

Quote from: mano237 on August 25, 2017, 09:41:38 AM

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

Definitely looks like a good PSU option if you have 220v power. Doesn't work over 110v though. "INPUT:180V--264V"

Do you have any experience running two L3+'s off a single 1800w PSU? Each L3+ consumes 800w +10%, so do you have to underclock them to get two to run off a single 1800w PSU? Can you even still underclock/overclock them? I read somewhere that their firmware doesn't allow for it anymore, but I remember mining years ago with Antminers and I could underclock/overclock them as I wished.

You can still over clock the L3+ and under clocking is also possible.

In real life the miner takes around 800W with the APW3+ model. So just the miner runs probably a little less than that.

1800 should be more than enough to run 2 l3+. If you overclock them on 600 MH+ you should definitely run them on 2 PSU

GMPoison

sr. member

Activity: 434

Merit: 250

Quote from: CryptoCrane on August 25, 2017, 01:58:28 PM

Quote from: mano237 on August 25, 2017, 09:41:38 AM

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

Definitely looks like a good PSU option if you have 220v power. Doesn't work over 110v though. "INPUT:180V--264V"

Do you have any experience running two L3+'s off a single 1800w PSU? Each L3+ consumes 800w +10%, so do you have to underclock them to get two to run off a single 1800w PSU? Can you even still underclock/overclock them? I read somewhere that their firmware doesn't allow for it anymore, but I remember mining years ago with Antminers and I could underclock/overclock them as I wished.

CryptoCrane

sr. member

Activity: 384

Merit: 256

Quote from: mano237 on August 25, 2017, 09:41:38 AM

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

Definitely looks like a good PSU option if you have 220v power. Doesn't work over 110v though. "INPUT:180V--264V"

Albortz

sr. member

Activity: 420

Merit: 250

Tax Attorney - Investor - Entrepreneur

Quote from: LTCbusiness on August 25, 2017, 10:38:23 AM

Guys, anyone here are able to change the payment from Bank Wire to Bitcoin/Litecon after contacting the Bitmain support? I would love to make the bank wire, but my stupid bank requires so many documents and Bitmain only give me a tiny Proforma Invoice, which is not enough. I tried to contact Bitmain support but I really does not expect the to reply soon, usually it took them 3-5 days to reply some of my tickets.

This is exactly the reason why Bitcoin and other Alt need to survive in the long run. How free can you be once governments got rid of cash and control all your possessions with one click of the mouse...

Even though I never had that problem, I think it might be possible to change IF you get hold on someone.

GMPoison

sr. member

Activity: 434

Merit: 250

Quote from: LTCbusiness on August 25, 2017, 10:38:23 AM

Guys, anyone here are able to change the payment from Bank Wire to Bitcoin/Litecon after contacting the Bitmain support? I would love to make the bank wire, but my stupid bank requires so many documents and Bitmain only give me a tiny Proforma Invoice, which is not enough. I tried to contact Bitmain support but I really does not expect the to reply soon, usually it took them 3-5 days to reply some of my tickets.

If your bank tells you who you can and cannot purchase completely legal computer hardware from, or how much of your own money you can and cannot spend without providing multiple documents, I would find a different bank.

LTCbusiness

newbie

Activity: 53

Merit: 0

Guys, anyone here are able to change the payment from Bank Wire to Bitcoin/Litecon after contacting the Bitmain support? I would love to make the bank wire, but my stupid bank requires so many documents and Bitmain only give me a tiny Proforma Invoice, which is not enough. I tried to contact Bitmain support but I really does not expect the to reply soon, usually it took them 3-5 days to reply some of my tickets.

Longsnowsm

hero member

Activity: 868

Merit: 517

Quote from: StanchoBS on August 25, 2017, 08:14:22 AM

Help me - What is this number on my L3+ , running 6 hours to screenshot
i dont have any problem from 20 days runing non stop but i wonder what is HW.

If that screen shot is from only 6 hrs since starting then I would keep an eye on that miner. That board specifically. I have seen over time error rates climb on weak boards with more hardware errors. Take note of which miner this is and then just remember if you start seeing issues where that miner crashes then focus on that board.

Like other said it may not be an issue, but I don't like to see a number that high after only 6 hours.

mano237

member

Activity: 168

Merit: 10

Quote from: shoaib39 on August 25, 2017, 02:23:22 AM

Quote from: mano237 on August 25, 2017, 01:54:05 AM

I ordered one L3+ yesterday but forgot to add the power supply Roll Eyes

Which power supply are you using for the L3+? I don't wanna pay the shipment costs twice. Or is it the cheapest way anyway to buy it directly from bitmain?

yOU CAN BUY IT FROM HERE, this is better than Bitmain PSU.

https://www.aliexpress.com/item/YUNHUI-BTC-LTC-DASH-miner-power-supply-12V-146A-MAX-OUTPUT-1950W-suitable-for-ANTMINRT-S9/32816335089.html?spm=2114.search0104.3.1.RafZEQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10065_10151_10068_5400011_5430020_5410020_10307_10137_10060_10155_10154_10333_5370011_10334_10056_10335_10055_10054_10059_10332_100031_10099_10103_10102_10052_10053_10107_10050_10142_10051_10326_5390020_10084_10083_10080_10082_10081_10110_10175_10111_5420020_10112_10113_10114_10312_10313_10314_10315_10078_10079_10073,searchweb201603_18,ppcSwitch_5&btsid=819e3534-2136-4437-a8f2-055dfaed464e&algo_expid=b4668018-0333-40d8-b8d8-c5edd2c57a2c-0&algo_pvid=b4668018-0333-40d8-b8d8-c5edd2c57a2c&transAbTest=ae803_1

Looks nice, thanks!

CryptoCrane

sr. member

Activity: 384

Merit: 256

Quote from: HagssFIN on August 25, 2017, 08:25:21 AM

HW stands for the hardware error. But your HW number is so small that it is nothing to worry about and it does not affect the hash rate.

Agreed - this is nothing to be concerned about. Having any hashing boards showing 0 HW errors is pretty rare.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

HW stands for the hardware error. But your HW number is so small that it is nothing to worry about and it does not affect the hash rate.

Topic: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner - page 129. (Read 284869 times)