Hi!
Please help to find this firmware... all link where i founded is down (
Thanx!
Topic: LightningAsic Gridseed Controller Firmware V3 (Read 51149 times)
It appears that flashing the WiiBox sets the MAC address of the network ports to 0C:82:68:DD:E1:18. Just did this to 2 units and now can't use them connected to the same network. Anyone have a solution to changing the MAC address of the device or an I going to have to start VLAN'ing my switch and setting each WiiBox up on a separate network?
Please be so kind and create a way for us to flash some other firmware, I really want to reuse my controller.
Thank you!
Thank you!
I want to restore Double digLAG3355_upgrade_v1.binLAG3355_upgrade_v2.binappear"Failed to unpack firmware"
You can download there:
LAG3355_upgrade_v1.bin - https://mega.co.nz/#!OZwAVAyY!k81zqHIuGf3GEY6RtG-eNirtmlPSm0fKjHpQO9K0p8k
LAG3355_upgrade_v2.bin - https://mega.co.nz/#!OZwAVAyY!k81zqHIuGf3GEY6RtG-eNirtmlPSm0fKjHpQO9K0p8k
LAG3355_12-RC10g.bin - https://mega.co.nz/#!iEREiSDJ!Bc2H42zCNyieNoQhsnpGCM-fJVUwkneU1HRHluWciO0
Also join the request.
Sandor, please just do it!
Thanks.
LAG3355_upgrade_v1.bin - https://mega.co.nz/#!OZwAVAyY!k81zqHIuGf3GEY6RtG-eNirtmlPSm0fKjHpQO9K0p8k
LAG3355_upgrade_v2.bin - https://mega.co.nz/#!OZwAVAyY!k81zqHIuGf3GEY6RtG-eNirtmlPSm0fKjHpQO9K0p8k
LAG3355_12-RC10g.bin - https://mega.co.nz/#!iEREiSDJ!Bc2H42zCNyieNoQhsnpGCM-fJVUwkneU1HRHluWciO0
Sandror, Please give us access to revert back to openwrt firmware, NOW that mining is dead, so we can use the controller for others project.
W_M
W_M
Also join the request.
Sandor, please just do it!
Thanks.
After update on v3 cant mine BTC in dualmode, no settings in web interface... 
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?
And when i try rollback to v1 have error - "Firmware with name 'LAG3355_12-RC1' is not found". Anyone successfully rollback on v1?The file it searches for. http://www.megafileupload.com/en/file/505377/LAG3355-12-RC1-bin.html Uploaded it myself a month ago. If it doesn't download, let me know, still have it. (Directly received from Jack)
You can give me LAG3355_12-RC1.bin ?
THX
Sandror, Please give us access to revert back to openwrt firmware, NOW that mining is dead, so we can use the controller for others project.
W_M
W_M
Need some help please. Everything has gone fine for a year now the controller is giving me this error "The CGI process did not produce any response" when I try to access it. I have read this thread but could not find the fix for it.
still nothing huh?
Sandror, Please give us access to revert back to openwrt.
W_M
W_M
I think it's time to give us access to revert back to openwrt. These controllers are just sitting here doing nothing
Danny
Danny
+1 if the project is EOL, otherwise please upgrade the firmware with your latest Sandor111 CPUMINER core V.1.0e.
Thanks W_M
I think it's time to give us access to revert back to openwrt. These controllers are just sitting here doing nothing
Danny
Danny
+1
@ sandor111, Please can you upgrade the firmware with your latest CPUMINER, no other modify are required, only the upgrade of CPUMINER core.
Thanks in advance W_M
Thanks in advance W_M
Hi, I think you can't revert to openwrt, only if sandor/asiabtc release an update with ssh, console or failsafe active there is the possibility to resume openwrt. Please if you find one way to resume openwrt can you post the solution here.
Thanks in advance W_M
Thanks in advance W_M
Hi, I have upgraded my WiiBox with the latest V3 firmware (LAG3355_12-RC10g), but now i lost SSH access, is possible to resume SSH access?
Thanks in advance W_M
The new firmware has ssh, console and failsafe mode disabled there's no way to get in anymore.Thanks in advance W_M
How can I flash some wiibox controllers with LightningASIC firmware back to openwrt? It's to run some Technobit boards.
there is new LA100M pre-order now.
hope you all can like it.
thanks.
Jack.
hope you all can like it.
thanks.
Jack.
Cpuminer update
Support for individual chip frequency is added. It’s possible to run regular USB miners and G-Blades on a single instance, because the number of chips is now auto detected.
This means that I will be working on building a new bin image, so that is possible to run G-Blades on and set frequencies specific to the chip.
Support for individual chip frequency is added. It’s possible to run regular USB miners and G-Blades on a single instance, because the number of chips is now auto detected.
This means that I will be working on building a new bin image, so that is possible to run G-Blades on and set frequencies specific to the chip.
Hi Sandor, maybe I missed it but were you able to build the BIN file for the Lightningasic controller to support the G-blade? Thanks for all your great work man!
---
Hi, I have upgraded my WiiBox with the latest V3 firmware (LAG3355_12-RC10g), but now i lost SSH access, is possible to resume SSH access?
Thanks in advance W_M
The new firmware has ssh, console and failsafe mode disabled there's no way to get in anymore. Thanks in advance W_M
Hi, I have upgraded my WiiBox with the latest V3 firmware (LAG3355_12-RC10g), but now i lost SSH access, is possible to resume SSH access?
Thanks in advance W_M
Thanks in advance W_M
Did someone succesfully use Lightningasic with a wallet for solomning in the local LAN?
I am always getting Segmentation fault if i try to mine for example http://192.168.0.175:10708
Maybe its a Bug, Sandor?
I am always getting Segmentation fault if i try to mine for example http://192.168.0.175:10708
Maybe its a Bug, Sandor?
Sorry, but i have the same question. Any ideas?
Jump to: