Topic: Linux mining distro for the Raspberry PI - MinePeon - page 53. (Read 685140 times)
how many devises have you successfully run with th pi? When I try to run my setup it crashes the pi every time. I have 57 erupters running on 10 d-link 7 hubs. All are connected to a Rosewill 10 port. It runs just fine on my Debian setup on cgminer. I have been able to get one hub with 6 erupters working but no more then that.
I have it working, just there are some oddities that I didn't look into the other day after I got it working the way TheMineForeman wanted it to.
Sorry about being a bit pedantic about how I want it to work, pear SMTP is already loaded and being used, plus it also makes adding on hooks for other types of alerts easy.
Neil
My ISP, Virgin Media, uses Google Apps to provide email service, and they appear to require SMTP authentication. Here is the information and some more information. My impression is that this is pretty normal, at least in the UK, and has been for about 5 - 10 years.
Having said which, I have tried putting my ISP's SMTP server in the relevant box in MinePeon, and haven't yet bothered unplugging the Butterfly miner to see if it works without a password.
Having said which, I have tried putting my ISP's SMTP server in the relevant box in MinePeon, and haven't yet bothered unplugging the Butterfly miner to see if it works without a password.
I have now successfully received some emails from the Peon, so disregard the above. On the other hand, Gmail put them in my spam folder, and SMTP Auth might help with that. Actually, now that I look more closely, the email appears to have no 'To:' address, as if it's been BCC'ed - possibly it would help to fill that in? Perhaps this is because I entered into the Peon control panel the from address where the to address should be? I wasn't sure what should go in the box, because it just says 'email address' and not 'from' or 'to'. I think my ISP forces the from address to be a particular thing, so perhaps the 'to' address has been dropped by being the same.
The SMTP auth should be completed soon, I have it working, just there are some oddities that I didn't look into the other day after I got it working the way TheMineForeman wanted it to.
My ISP, Virgin Media, uses Google Apps to provide email service, and they appear to require SMTP authentication. Here is the information and some more information. My impression is that this is pretty normal, at least in the UK, and has been for about 5 - 10 years.
Having said which, I have tried putting my ISP's SMTP server in the relevant box in MinePeon, and haven't yet bothered unplugging the Butterfly miner to see if it works without a password.
Having said which, I have tried putting my ISP's SMTP server in the relevant box in MinePeon, and haven't yet bothered unplugging the Butterfly miner to see if it works without a password.
I have now successfully received some emails from the Peon, so disregard the above. On the other hand, Gmail put them in my spam folder, and SMTP Auth might help with that. Actually, now that I look more closely, the email appears to have no 'To:' address, as if it's been BCC'ed - possibly it would help to fill that in? Perhaps this is because I entered into the Peon control panel the from address where the to address should be? I wasn't sure what should go in the box, because it just says 'email address' and not 'from' or 'to'. I think my ISP forces the from address to be a particular thing, so perhaps the 'to' address has been dropped by being the same.
NM... still doing it. 
Has anyone else ran into an issue with some pools where it'll accept shares for about 15 mins then it stops. Minepeon shows mining happening but non of the pools I have programmed are getting them. Bitminter and BTCguild work great but recentley I started mining on GHash.io and that's one pool I'm having problems. Also Coinotron mining PPC.
Ideas?
Ideas?
Upgraded to PR2 and seems to be running smoothy now.
0.2.4PR2 is running great for me. I love that it boots bfgminer rather than cgminer, will you keep it this way until it's easy to switch in the GUI?
Check the settings page, you can change the miner there . (and set parameters if you want)
(Still need easier pool switching, but I know there are higher priorities) 
Soon
Neil
Nice, I just noticed that after I posted. Awesome progress, I plan on adding a 4th for my Drillbit hardware that should arrive soon.
0.2.4PR2 is running great for me. I love that it boots bfgminer rather than cgminer, will you keep it this way until it's easy to switch in the GUI?
Check the settings page, you can change the miner there . (and set parameters if you want)
(Still need easier pool switching, but I know there are higher priorities)
Soon
Neil
0.2.4PR2 is running great for me. I love that it boots bfgminer rather than cgminer, will you keep it this way until it's easy to switch in the GUI?
(Still need easier pool switching, but I know there are higher priorities)
(Still need easier pool switching, but I know there are higher priorities)
Has anyone else ran into an issue with some pools where it'll accept shares for about 15 mins then it stops. Minepeon shows mining happening but non of the pools I have programmed are getting them. Bitminter and BTCguild work great but recentley I started mining on GHash.io and that's one pool I'm having problems. Also Coinotron mining PPC.
Ideas?
Ideas?
Quote
Are there any instructions on how to manually update just the CGMINER to the latest version by getting it directly from the GIT?
Is there a specific reason that you need the latest version - i.e. does it fix a problem you are having or solve a security issue ?The PR2 comes with CGminer 3.6.1 which I have been having issues running with the Bitburner Fury boards. Which is why I was wanting to give the latest release a go
Cheer
Feel free to correct me if I am wrong in the above that is just from what I have read.
I've used both Arch and wheezy.
It's a hardware thing, the foundation chose to use the BCM2835 chip in order to keep the raspberry pi under $35.
One link of many, the only forum I've found that claims they get USB3 devices to work with raspberry pi is this one.
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=7&t=1147
Feel free to correct me if I am wrong in the above that is just from what I have read.
I've used both Arch and wheezy.
It's a hardware thing, the foundation chose to use the BCM2835 chip in order to keep the raspberry pi under $35.
One link of many, the only forum I've found that claims they get USB3 devices to work with raspberry pi is this one.
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=7&t=1147
I have this hub on order from ebay.co.uk seller orico_pc:
ORICO 10-Port Aluminium USB3.0 Powered Hub
Ordered on 2013-07-16, before I'd done more research to know that USB3 may have problems with cgminer / Rasp Pi. I'll let you know if it works with MinePeon.
PI and USB3 hubs don't work... Its USB 2 only with the Pi and you need to buy a decent one... None of those 10 port $6 on eBay jobs.ORICO 10-Port Aluminium USB3.0 Powered Hub
Ordered on 2013-07-16, before I'd done more research to know that USB3 may have problems with cgminer / Rasp Pi. I'll let you know if it works with MinePeon.
Feel free to correct me if I am wrong in the above that is just from what I have read.
I have this hub on order from ebay.co.uk seller orico_pc:
ORICO 10-Port Aluminium USB3.0 Powered Hub
Ordered on 2013-07-16, before I'd done more research to know that USB3 may have problems with cgminer / Rasp Pi. I'll let you know if it works with MinePeon.
PI and USB3 hubs don't work... Its USB 2 only with the Pi and you need to buy a decent one... None of those 10 port $6 on eBay jobs. ORICO 10-Port Aluminium USB3.0 Powered Hub
Ordered on 2013-07-16, before I'd done more research to know that USB3 may have problems with cgminer / Rasp Pi. I'll let you know if it works with MinePeon.
I was having issues running Minepeon 0.2.3a with CGminer and the USB Block Erupters. If I ran more than 12 Erupters (on three powered D-Link DUB-H7's), CGminer would crash my Raspi Pi. Tried to switch to BFGMiner, but could never get it working.
Decided to try Minepeon 0.2.4PR2 and loaded the BFGminer config file. This time Minepeon is running BFGminer with 23 USB Block Erupters on 4 D-Link hubs without a hicckup for almost 9 hrs. Only thing I lost is my LCD output to my AdaFruit LCD and LCD Systems Info screens
Decided to try Minepeon 0.2.4PR2 and loaded the BFGminer config file. This time Minepeon is running BFGminer with 23 USB Block Erupters on 4 D-Link hubs without a hicckup for almost 9 hrs. Only thing I lost is my LCD output to my AdaFruit LCD and LCD Systems Info screens
If you want, I have an image of 0.2.3a w/ BFG set as the default, along with OS packages updated (about two weeks old), http://tk1337.com/downloads/minepeon-0.2.3a-bfg-2gb-im1.img.zip - Made it awhile back for a few people on here
Thanks, I'll give it a try.
What could be wrong, Neil?
Can you log in via ssh and do;-
chmod +x /opt/minepeon/etc/init.d/miner-start.sh
I may have inadvertently introduced a but in updating
.Neil
Something very strange happened half hour ago...
I got 2 new USB Block Erupters and inserted them in 2 HUB's that already were being using to mine. Both stayed lighted. I did a reboot to the RPI affected. The bfgminer didn't started. I removed the 60 seconds sleep time... nothing... Transferred both Gizmos to the second RPI. The same. No bfgminer again after a reboot. Without the 2 new Gizmos, the first RPI didn't restarted bfgminer. Tried cgminer default and reboot. Nothing. Finally I did a reboot to the third RPI. bfgminer didn't started. Several restarts and the 3 RPI's have the same problem. No miner starts.
The 3 RPI had the last version of Arch and MinePeon, from 2 or 3 hours earlier.
I had to go back to MinePeon 0.2.4 PR1. With this old version, bfgminer started at the 3 RPI's and all 46 Gizmos are working again (with the 1970-01-01 problem).
What could be wrong, Neil?
I got 2 new USB Block Erupters and inserted them in 2 HUB's that already were being using to mine. Both stayed lighted. I did a reboot to the RPI affected. The bfgminer didn't started. I removed the 60 seconds sleep time... nothing... Transferred both Gizmos to the second RPI. The same. No bfgminer again after a reboot. Without the 2 new Gizmos, the first RPI didn't restarted bfgminer. Tried cgminer default and reboot. Nothing. Finally I did a reboot to the third RPI. bfgminer didn't started. Several restarts and the 3 RPI's have the same problem. No miner starts.
The 3 RPI had the last version of Arch and MinePeon, from 2 or 3 hours earlier.
I had to go back to MinePeon 0.2.4 PR1. With this old version, bfgminer started at the 3 RPI's and all 46 Gizmos are working again (with the 1970-01-01 problem).
What could be wrong, Neil?
I was having issues running Minepeon 0.2.3a with CGminer and the USB Block Erupters. If I ran more than 12 Erupters (on three powered D-Link DUB-H7's), CGminer would crash my Raspi Pi. Tried to switch to BFGMiner, but could never get it working.
Decided to try Minepeon 0.2.4PR2 and loaded the BFGminer config file. This time Minepeon is running BFGminer with 23 USB Block Erupters on 4 D-Link hubs without a hicckup for almost 9 hrs. Only thing I lost is my LCD output to my AdaFruit LCD and LCD Systems Info screens
Decided to try Minepeon 0.2.4PR2 and loaded the BFGminer config file. This time Minepeon is running BFGminer with 23 USB Block Erupters on 4 D-Link hubs without a hicckup for almost 9 hrs. Only thing I lost is my LCD output to my AdaFruit LCD and LCD Systems Info screens
If you want, I have an image of 0.2.3a w/ BFG set as the default, along with OS packages updated (about two weeks old), http://tk1337.com/downloads/minepeon-0.2.3a-bfg-2gb-im1.img.zip - Made it awhile back for a few people on here
I was having issues running Minepeon 0.2.3a with CGminer and the USB Block Erupters. If I ran more than 12 Erupters (on three powered D-Link DUB-H7's), CGminer would crash my Raspi Pi. Tried to switch to BFGMiner, but could never get it working.
Decided to try Minepeon 0.2.4PR2 and loaded the BFGminer config file. This time Minepeon is running BFGminer with 23 USB Block Erupters on 4 D-Link hubs without a hicckup for almost 9 hrs. Only thing I lost is my LCD output to my AdaFruit LCD and LCD Systems Info screens
Decided to try Minepeon 0.2.4PR2 and loaded the BFGminer config file. This time Minepeon is running BFGminer with 23 USB Block Erupters on 4 D-Link hubs without a hicckup for almost 9 hrs. Only thing I lost is my LCD output to my AdaFruit LCD and LCD Systems Info screens
Jump to: