Linux mining distro for the Raspberry PI - MinePeon - page 54.

MineForeman.com

legendary

Activity: 896

Merit: 1000

Quote from: mtbitcoin on October 18, 2013, 04:44:46 AM

Quote from: ct1aic on October 17, 2013, 06:39:34 AM

Oh no! Not again! cgminer: LATEST-IS-3.6.3

Are there any instructions on how to manually update just the CGMINER to the latest version by getting it directly from the GIT?

Or are there any specific configurations that needs to be done first>?

Cheers

We are getting very close to a new release, if you want you can download the PR (Pre Release) here;-

http://minepeon.com/forums/viewtopic.php?f=3&t=291

It has all of the latest as well as a lot of bug fix's and new features.

Neil

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Oh no! Not again! cgminer: LATEST-IS-3.6.4

astutiumRob

full member

Activity: 201

Merit: 100

Quote

Are there any instructions on how to manually update just the CGMINER to the latest version by getting it directly from the GIT?

Is there a specific reason that you need the latest version - i.e. does it fix a problem you are having or solve a security issue ?

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: ct1aic on October 17, 2013, 06:39:34 AM

Oh no! Not again! cgminer: LATEST-IS-3.6.3

Are there any instructions on how to manually update just the CGMINER to the latest version by getting it directly from the GIT?

Or are there any specific configurations that needs to be done first>?

Cheers

Beastlymac

hero member

Activity: 630

Merit: 501

Miner Setup And Reviews. WASP Rep.

Quote from: souspeed on October 18, 2013, 12:02:09 AM

Does anybody know if minepeon supports the HEX16A miner build by marto74?

No minepeon only supports devices that are supported by official builds of bfgminer and cgminer

souspeed

full member

Activity: 154

Merit: 1000

Fica Tranquilo

Does anybody know if minepeon supports the HEX16A miner build by marto74?

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: tk1337 on October 16, 2013, 02:41:58 PM

Quote from: mtbitcoin on October 16, 2013, 02:03:05 PM

Sorry for the nub question. But are there instructions for setting it up with a static ip. I don't seem to be having any luck with getting the pr2 image static IP working. Had no problems with the 0.23a version

Cheers

I noticed on 0.2.4 PR1, that within sudo wicd-curses, go to preferences (shift+P) it had the wired interface setup as ifb1, I changed it to eth0, saved (f10) went back to the main screen, then went into the preference for eth0 (should be first device on the list, you use the right arrow to go into the configuration for said device), setup the static ip information, saved (F10), then connected (Shift+C) and all was good.

Hope that helps.

Thanks! That did the trick

Beastlymac

hero member

Activity: 630

Merit: 501

Miner Setup And Reviews. WASP Rep.

Tomorrow might be the lucky day Mineforeman receives his dev unit. Hopefully. The unit was posted out Monday.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Oh no! Not again! cgminer: LATEST-IS-3.6.3

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: tk1337 on October 16, 2013, 02:41:58 PM

Quote from: mtbitcoin on October 16, 2013, 02:03:05 PM

Sorry for the nub question. But are there instructions for setting it up with a static ip. I don't seem to be having any luck with getting the pr2 image static IP working. Had no problems with the 0.23a version

Cheers

I noticed on 0.2.4 PR1, that within sudo wicd-curses, go to preferences (shift+P) it had the wired interface setup as ifb1, I changed it to eth0, saved (f10) went back to the main screen, then went into the preference for eth0 (should be first device on the list, you use the right arrow to go into the configuration for said device), setup the static ip information, saved (F10), then connected (Shift+C) and all was good.

Hope that helps.

Another option... Set a DHCP lease in your router for the MAC address. It sure makes it easy when you reload your image as that never changes, it will always be the same IP. Less to configure if you do reload or try a test build.

tk1337

sr. member

Activity: 266

Merit: 250

Quote from: mtbitcoin on October 16, 2013, 02:03:05 PM

Sorry for the nub question. But are there instructions for setting it up with a static ip. I don't seem to be having any luck with getting the pr2 image static IP working. Had no problems with the 0.23a version

Cheers

I noticed on 0.2.4 PR1, that within sudo wicd-curses, go to preferences (shift+P) it had the wired interface setup as ifb1, I changed it to eth0, saved (f10) went back to the main screen, then went into the preference for eth0 (should be first device on the list, you use the right arrow to go into the configuration for said device), setup the static ip information, saved (F10), then connected (Shift+C) and all was good.

Hope that helps.

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Sorry for the nub question. But are there instructions for setting it up with a static ip. I don't seem to be having any luck with getting the pr2 image static IP working. Had no problems with the 0.23a version

Cheers

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Oh no! Not again! cgminer: LATEST-IS-3.6.2

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: MineForeman.com on October 16, 2013, 02:39:17 AM

Quote from: ct1aic on October 16, 2013, 02:20:12 AM

Do I need to download it and make 3 new SD's or can I upgrade my 3 PR1 images with sudo git pull's?

Download again sorry, there are a few OS changes. Mainly addition of i2c smbus for the upcoming LCD plugins and I have cut down SD card writes even more.

Neil

Done 4 SD's. And what about a second "New Password" field, to guarantee that there is no error in the digitation of the new password? That feature was already in 0.2.3 version.

I still have the date problem... BFGMiner still starts before the RPI can have time to go to the NTP server...

MineForeman.com

legendary

Activity: 896

Merit: 1000

Quote from: ct1aic on October 16, 2013, 02:20:12 AM

Do I need to download it and make 3 new SD's or can I upgrade my 3 PR1 images with sudo git pull's?

Download again sorry, there are a few OS changes. Mainly addition of i2c smbus for the upcoming LCD plugins and I have cut down SD card writes even more.

Neil

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Quote from: MineForeman.com on October 16, 2013, 12:52:54 AM

Quote from: easynote on October 15, 2013, 04:16:15 AM

Works much better the PR1 than 0.2.3

Good work

We are now up to pre release 2 now and as far as I know I have managed to squash all of the bugs. You are welcome to download it, you can find a link here;-

http://minepeon.com/forums/viewtopic.php?f=3&t=291

Neil

Do I need to download it and make 3 new SD's or can I upgrade my 3 PR1 images with sudo git pull's?

MineForeman.com

legendary

Activity: 896

Merit: 1000

Quote from: easynote on October 15, 2013, 04:16:15 AM

Works much better the PR1 than 0.2.3

Good work

We are now up to pre release 2 now and as far as I know I have managed to squash all of the bugs. You are welcome to download it, you can find a link here;-

http://minepeon.com/forums/viewtopic.php?f=3&t=291

Neil

easynote

hero member

Activity: 700

Merit: 500

CryptoTalk.Org - Get Paid for every Post!

Works much better the PR1 than 0.2.3

Good work

MineForeman.com

legendary

Activity: 896

Merit: 1000

Quote from: cereal7802 on October 14, 2013, 03:42:46 PM

Not going to be much help in terms of troubleshooting, but i tried 0.2.4 PR1 and found that it wouldn't detect my usb wireless card like the previous version did. not sure what all changed to cause that. also would like to note, using 2.3a, cgminer doesn't seem to work with my ztex. keeps saying there are hardware errors and removes and readds the ztex device as a new one. bfgminer seems to work fine so i have switched to that.

I will do some more testing on wireless tonight to see if I can sort it out, I had not spotted any problems but I don't run my miners wireless. I did buy a Pi and a wireless USB dongle though just to test this sort of thing and it arrived today.

ZTEX has been removed from cgminer (it is an only and cranky driver) so yeah, bfgminer is the only one that supports it now.

Neil

cereal7802

newbie

Activity: 57

Merit: 0

Not going to be much help in terms of troubleshooting, but i tried 0.2.4 PR1 and found that it wouldn't detect my usb wireless card like the previous version did. not sure what all changed to cause that. also would like to note, using 2.3a, cgminer doesn't seem to work with my ztex. keeps saying there are hardware errors and removes and readds the ztex device as a new one. bfgminer seems to work fine so i have switched to that.

Topic: Linux mining distro for the Raspberry PI - MinePeon - page 54. (Read 685140 times)