lolMiner 1.64: Fastest Kaspa miner in market - page 12.

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: thefirstnamelessdude on April 01, 2022, 02:23:00 PM

First of all thanks for this fantastic miner!

Today I updated to version 1.48 and saw a mem temp of 100-103°C. Is that too much? Anything I can do to lower it?

OS: Windows 10
Video card: RTX 3070 Ti (LHR)
Extra settings: --cclk 990

Thanks for your answer.

The 3070 ti has GDDR6X memory which tend to overheat quite quickly and although most people say as long as you are keeping the memory temperature to below 110 Degree Celsius you should not worry much I think that we should worry until we put the temperatures to just below 100 Degree Celsius and I think that should be fine then.

The correct settings in Windows for this GPU are:
Core clock -200
Memory clock +1800 max (maybe unstable lower until you hit the sweet spot)
Power limit 50%

If you have these settings then you can add additional cooling fans to your rig or change your thermal pads.

thefirstnamelessdude

newbie

Activity: 18

Merit: 6

First of all thanks for this fantastic miner!

Today I updated to version 1.48 and saw a mem temp of 100-103°C. Is that too much? Anything I can do to lower it?

OS: Windows 10
Video card: RTX 3070 Ti (LHR)
Extra settings: --cclk 990

Thanks for your answer.

Cryter

newbie

Activity: 1

Merit: 0

I just downloaded version 1.48, do you know why it doesn't show me the power and efficiency in the appropriate columns?

jgonzi

member

Activity: 639

Merit: 19

Quote from: Spirit_line on March 29, 2022, 04:44:22 PM

how to set fixed lhr in windows?

For version 1.46a goes with the tune value that you achieve. then you can put --lhrtune 10.4

In the new 1.47 alpha you can put directly the value like --lhrtune 78.2, but problem is that they say that limit the miner and will not run that value if the GPU is not allow to do it. So it is better up 1.47 to don't use it.

Spirit_line

newbie

Activity: 1

Merit: 0

how to set fixed lhr in windows?

Alexstabilini

jr. member

Activity: 42

Merit: 2

With all gpu (nvidia and amd) lolminer works without crash but my rig is losing 20mhs.. :-(
i tried to select only one nvidia device to make a test.. but lolminer crash the same my w5700 ..

any solution?

ok.I solved!
i start first lolminer and after teamredminer and it works.

thanks
alex

jgonzi

member

Activity: 639

Merit: 19

Quote from: Alexstabilini on March 27, 2022, 02:42:21 PM

Hi!
is there a mode to force lolminer to no check all cards in a rig?
i have a rig with 3 amd and 14 nvidia.. and i try to use lolminer with --devices NVIDIA option but lolminer crash one of my amd card..a radeon w5700 with special bios (that goes with other 2 amd card with teamredminer)..message is like dead gpu etc etc ...other 2 amd cards are ok and continue mining..
i tried to force only one nvidia device in lolminer with same result..

thanks
alex

Try --devices a,b,c or put all gpus with lolMiner if lolMiner handles better that AMD that crash...

Alexstabilini

jr. member

Activity: 42

Merit: 2

Hi!
is there a mode to force lolminer to no check all cards in a rig?
i have a rig with 3 amd and 14 nvidia.. and i try to use lolminer with --devices NVIDIA option but lolminer crash one of my amd card..a radeon w5700 with special bios (that goes with other 2 amd card with teamredminer)..message is like dead gpu etc etc ...other 2 amd cards are ok and continue mining..
i tried to force only one nvidia device in lolminer with same result..

thanks
alex

jgonzi

member

Activity: 639

Merit: 19

Quote from: batsonxl on March 26, 2022, 06:46:38 AM

please for windows 1.47 version!

It is a public alpha in the Discord Channel: https://discord.gg/3U64yDZK

But they said is alpha, and still working on

batsonxl

member

Activity: 1208

Merit: 27

please for windows 1.47 version!

alucard20724

sr. member

Activity: 703

Merit: 272

Does 1.46a work with toncoinpool.io?

i'm not seeing any of my workers on toincoinpool.io with 1.46a. (my nvidia cards)
1.46a works perfectly fine for icemining.. i'm trying to switch to a different pool because icemining got hacked.

i can see my workers on toincoinpool.io with teamredminer. (my amd cards are running TRM)

~~edit... figured it out... need the worker name at the end of the wallet address.. i.e. walletaddress.workname~~... eh.. nope.. that didn't work

these are the parameters i'm using

--algo ETHASH --ethstratum ETHPROXY --pool eth-us-east1.nanopool.org:9433 --user 0x8ethwallet.$rigName/[email protected] --pass x --tls 1 --dualmode TONDUAL --ton-mode 3 --dualpool stratum+tcp://pplns.toncoinpool.io:443/stratum --dualuser TonWallet --dualpass $rigName --watchdog exit --apihost 127.0.0.1 --apiport 4444 --watchdogscript reboot.sh

but does not work.
I put in --ton-mode 3 thinking that was it... but it's still not showing up on toincoinpool.io with 1.46a

batsonxl

member

Activity: 1208

Merit: 27

Thanks for ALPH, i tried on 4g cards etc+alph but it said not enough memory. Is 4g not enough?

sxemini

member

Activity: 1558

Merit: 69

Quote from: jgonzi on March 07, 2022, 09:12:01 AM

Video how to reduce Watts making Dual Mining in some Ampere:
https://youtu.be/nDw8Mwnr3Xs

Problem is, nearly all HiveOS user did not check the real gpu frequences. It is mostly not that what you set in HiveOS. For me this is the biggest "bug" on HiveOS = Checking the live frequences
I can run my 3070 with under 150w - final frequences 1440/8200 with 740mv at the moment.

jgonzi

member

Activity: 639

Merit: 19

Video how to reduce Watts making Dual Mining in some Ampere:
https://youtu.be/nDw8Mwnr3Xs

jgonzi

member

Activity: 639

Merit: 19

Quote from: Akyboy on March 02, 2022, 10:02:41 AM

Hi guys,

Iv got 3070s in my rigs, non LHRs, all Windows
On one of my rigs I saw this morning messages something like, trying LHR tune or similar, causing lower hashrates on cards.
I completely forgot to screenshot, so I am not sure if you will be able to suggest anything.
I restarted miner and all went back to normal.

Thanks

Try to follow the windows Guide for Windows: https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-Windows-(LHR,Watchdog,WebServer)

And more if you have LHR

Akyboy

jr. member

Activity: 90

Merit: 1

Hi guys,

Iv got 3070s in my rigs, non LHRs, all Windows
On one of my rigs I saw this morning messages something like, trying LHR tune or similar, causing lower hashrates on cards.
I completely forgot to screenshot, so I am not sure if you will be able to suggest anything.
I restarted miner and all went back to normal.

Thanks

Qwertyyuui

newbie

Activity: 1

Merit: 0

Quote from: danyalbmw on February 21, 2022, 04:00:35 PM

hello
plz add a feature to reset overclocking values (like lock core clock) after exiting program
and also add built in timing for old pascal 1080 & 1080ti GDDR5X cards

yeah i need too learn how to clean overclock values Sad

jgonzi

member

Activity: 639

Merit: 19

Quote from: MegaVlad on February 25, 2022, 03:02:45 AM

2 Developers:

Is it possible to use memory tweaks for 1080Ti in LoLMiner (Linux)?
Something like --mt or similar?

Thank you in advance.

At the moment it is not possible with parameter. You should use 3rd Apps to do it. With HiveOS is very easy to apply it.

MegaVlad

newbie

Activity: 24

Merit: 1

2 Developers:

Is it possible to use memory tweaks for 1080Ti in LoLMiner (Linux)?
Something like --mt or similar?

Thank you in advance.

sxemini

member

Activity: 1558

Merit: 69

Quote from: Branko on February 23, 2022, 08:15:15 AM

Is dual mining actually worth it?

Make your own calculation with whattomine? Or you are to lazy? Roll Eyes

Short yes but you are to late for dual mining eth with ton - ton reward decreased bei 50% - and it is over in 2 - 3 month - because the givers bleeding out.

Hashrate for my 6900XT

61mh eth + 5gh ton use around 220w = double profit last month

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 12. (Read 156032 times)