Statistics (22:06:28); Mining: Ethash
Connected to: eu1.ethermine.org:4444
Uptime: 0h 5m 2s
GPU 0 GPU 1 Total
Speed (mh/s): 26.33 5.49 31.82
Pool (mh/s): 13.25 0.00 13.25
Best Share: 31.0G 0.0 31.0G
Shares (A/S/Hw): 1/0/0 0/0/0 1/0/0
Power (W): 101.7 86.0 187.7
Efficiency (mh/s/W): 0.258 0.063 0.170
Temp (deg C): 49 42
Fan Speed (%): 60 60
---------------------------------------------
Average speed (10s): 27.39mh/s | 0.00mh/s Total: 27.39 mh/s
New job received: 0xd4a553 Epoch: 396 Target: 0000000112e0be82
New job received: 0xbdd60b Epoch: 396 Target: 0000000112e0be82
New job received: 0x2efba6 Epoch: 396 Target: 0000000112e0be82
New job received: 0xb3b0bb Epoch: 396 Target: 0000000112e0be82
Average speed (10s): 27.48mh/s | 0.00mh/s Total: 27.48 mh/s
New job received: 0x99b0c9 Epoch: 396 Target: 0000000112e0be82
New job received: 0x8d7a8c Epoch: 396 Target: 0000000112e0be82
New job received: 0xca4e6f Epoch: 396 Target: 0000000112e0be82
New job received: 0xcda591 Epoch: 396 Target: 0000000112e0be82
Average speed (10s): 27.56mh/s | 0.00mh/s Total: 27.56 mh/s
New job received: 0x6c9729 Epoch: 396 Target: 0000000112e0be82
New job received: 0x0203e9 Epoch: 396 Target: 0000000112e0be82
New job received: 0x7ee8cb Epoch: 396 Target: 0000000112e0be82
New job received: 0x635f5c Epoch: 396 Target: 0000000112e0be82
Average speed (10s): 27.68mh/s | 0.00mh/s Total: 27.68 mh/s
New job received: 0x42a764 Epoch: 396 Target: 0000000112e0be82
New job received: 0xcbe2d1 Epoch: 396 Target: 0000000112e0be82
Average speed (10s): 27.80mh/s | 0.00mh/s Total: 27.80 mh/s
New job received: 0x9e9734 Epoch: 396 Target: 0000000112e0be82
Device 1 detected as crashed.
Closing miner and trying to call external script: ./emergency.sh (--watchdog script)
wtf crashed 1 st card Saphire nitro + 4gb. 2nd card Saphire pusle mini itx rx570 ((( fookin crashed always, before 2 days working good
Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 42. (Read 155341 times)
Hey, I'm new to mining and lolMiner. Looking for some assistance.
So I got the cortex bat setup but I get the [Active: false (OpenCL init failure: Memory object allocation failure)] error on both my gpus.
I tried increasing the virtual memory to 16GB and then 32GB but that didn't work.
Any help is appreciated.
+---------------------------------------------------------+
| _ _ __ __ _ _ ____ _ |
| | | ___ | | \/ (_)_ __ ___ _ __ / | |___ \/ | |
| | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | __) | | |
| | | (_) | | | | | | | | | __/ | | |_ / __/| | |
| |_|\___/|_|_| |_|_|_| |_|\___|_| |_(_)_____|_| |
| |
| This software is for mining |
| Ethash, Etchash |
| Equihash 144/5, 192/7, 210/9 |
| BeamHash I, II, III |
| ZelHash (EquihashR 125/4/0) |
| Cuck(ar)oo 29 |
| Cuckaroo 30 CTX |
| Cuckatoo 31/32 |
| |
| |
| Made by Lolliedieb, February 2021 |
+---------------------------------------------------------+
Setup Miner...
Device 0:
Name: GeForce RTX 2080
Address: 1:0
Vendor: NVIDIA Corporation
Memory: 8192 MByte
Active: false (OpenCL init failure: Memory object allocation failure)
Device 1:
Name: GeForce GTX 1080
Address: 2:0
Vendor: NVIDIA Corporation
Memory: 8192 MByte
Active: false (OpenCL init failure: Memory object allocation failure)
Connecting to pool...
Connected to ctxc.2miners.com:2222 (TLS disabled)
Authorized worker: ****************************************
New job received: 9eac79e2 Target: 80000000
Start Mining...
All devices deselected or failed compatiblity check. Closing lolMiner
So I got the cortex bat setup but I get the [Active: false (OpenCL init failure: Memory object allocation failure)] error on both my gpus.
I tried increasing the virtual memory to 16GB and then 32GB but that didn't work.
Any help is appreciated.
+---------------------------------------------------------+
| _ _ __ __ _ _ ____ _ |
| | | ___ | | \/ (_)_ __ ___ _ __ / | |___ \/ | |
| | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | __) | | |
| | | (_) | | | | | | | | | __/ | | |_ / __/| | |
| |_|\___/|_|_| |_|_|_| |_|\___|_| |_(_)_____|_| |
| |
| This software is for mining |
| Ethash, Etchash |
| Equihash 144/5, 192/7, 210/9 |
| BeamHash I, II, III |
| ZelHash (EquihashR 125/4/0) |
| Cuck(ar)oo 29 |
| Cuckaroo 30 CTX |
| Cuckatoo 31/32 |
| |
| |
| Made by Lolliedieb, February 2021 |
+---------------------------------------------------------+
Setup Miner...
Device 0:
Name: GeForce RTX 2080
Address: 1:0
Vendor: NVIDIA Corporation
Memory: 8192 MByte
Active: false (OpenCL init failure: Memory object allocation failure)
Device 1:
Name: GeForce GTX 1080
Address: 2:0
Vendor: NVIDIA Corporation
Memory: 8192 MByte
Active: false (OpenCL init failure: Memory object allocation failure)
Connecting to pool...
Connected to ctxc.2miners.com:2222 (TLS disabled)
Authorized worker: ****************************************
New job received: 9eac79e2 Target: 80000000
Start Mining...
All devices deselected or failed compatiblity check. Closing lolMiner
Hello, I have rx580 4b I use simplemining, can someone help me with the Miner OPTIONS line, what version of lolminer do I have to use? thx
Hi you should write it like this:
--algo ETHASH --pool $POOL --user $WALLET --pass x --apiport 4444 --4g-alloc-size 4080
Try first with 4080 if it hang ups in dag generation reduce by steps of 2 until if works ... 4078,4076,4074, ...
You should change $POOL and $WALLET by your wallet... in case you use a SSL Connection add also the parameter --tls on
Thx, use rxboost -i 30?
If you have a Intel CPU try to use his GPU as primary, so that will complete leave all memory on the cards. I hope that help you to make it run easier...
Its really matter which processor? I have AMD cpu on this mother board and don't have integrated videocard.
I mean it can be an AMD cpu with integrated video and INTEL cpu with integrated video.. what the difference ?
If you use the integrated GPU of the CPU you are leaving more free space in the 4Gb Card... all Megabyte is need to have the max value of the 4g-alloc-size. So if the primary is the integradeted GPU that leaves full space for the 4Gb... you still need the zombie mode but with more space in the memory of the 4Gb that will make more Mhs...
If you have a Intel CPU try to use his GPU as primary, so that will complete leave all memory on the cards. I hope that help you to make it run easier...
Its really matter which processor? I have AMD cpu on this mother board and don't have integrated videocard.
I mean it can be an AMD cpu with integrated video and INTEL cpu with integrated video.. what the difference ?
Hello, I have rx580 4b I use simplemining, can someone help me with the Miner OPTIONS line, what version of lolminer do I have to use? thx
Hi you should write it like this:
--algo ETHASH --pool $POOL --user $WALLET --pass x --apiport 4444 --4g-alloc-size 4080
Try first with 4080 if it hang ups in dag generation reduce by steps of 2 until if works ... 4078,4076,4074, ...
You should change $POOL and $WALLET by your wallet... in case you use a SSL Connection add also the parameter --tls on
Hello, I have rx580 4b I use simplemining, can someone help me with the Miner OPTIONS line, what version of lolminer do I have to use? thx
Hi All!
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
at linux after miner start you need to look at free mem at gpu:
amd-info 0
PCIE Link speed: GEN3 (8.0GT/s), PCIE Link width: x16
Memory total: 4096.00 MB, used: 4094.73 MB, free: 1.27 MB
i have issue at rx480 and 3 pcie x16 gen2 8-8-4 when lolminer after start can't full load current dag file to memory, after that memory stat looks like this:
Memory total: 4096.00 MB, used: 2050 MB, free: 2050 MB
Don't know why.. If i add another rx480 than 1 card also have same free mem, but 2nd card have 1.27 free and work correct. At this motherboard i don't have integrated videocard. Its seems like somehow it's uses resources of integrated card...
If you have a Intel CPU try to use his GPU as primary, so that will complete leave all memory on the cards. I hope that help you to make it run easier...
Hi All!
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
at linux after miner start you need to look at free mem at gpu:
amd-info 0
PCIE Link speed: GEN3 (8.0GT/s), PCIE Link width: x16
Memory total: 4096.00 MB, used: 4094.73 MB, free: 1.27 MB
i have issue at rx480 and 3 pcie x16 gen2 8-8-4 when lolminer after start can't full load current dag file to memory, after that memory stat looks like this:
Memory total: 4096.00 MB, used: 2050 MB, free: 2050 MB
Don't know why.. If i add another rx480 than 1 card also have same free mem, but 2nd card have 1.27 free and work correct. At this motherboard i don't have integrated videocard. Its seems like somehow it's uses resources of integrated card...
The PCIE x16 method works - i am getting 25-26mh/s , which is x3 time more than regular.
I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?
Cheers and thanks for the great work.
I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?
Cheers and thanks for the great work.
Calculates from BTC Talk user: Miner29
Dag 393 = 27mh/s
Dag 400 = 21-22mh/s
Dag 405 = 14mh/s
Dag 415 = 5-6mh/s
i think this calculation is wrong becouse right now dag 396 and i still have 28 mh/s at pcix16 gen3 while at pcix1 gen 2 it was 13mhs at dag 395 and right now at dag 369 i have 12 mhs
Anyway you can add this feature too? Teamredminer added it recently.
When I add --apihost 127.0.0.1 --apiport 4444 or --apihost 192.168.1.3 --apiport 4444, neither works with claymore manager. With teamredminer, when I add --cm_api_listen 192.168.1.3:4444, it works with claymore manager.
Code:
--api_listen=IP:PORT Enables the sgminer compatible api. IP:PORT is optional. If present, the IP:PORT combo
decides the interface(s) and port to listen to. Default is 127.0.0.1:4028. For
external access, use e.g. 0.0.0.0:4028. It's also valid to only specify the
port, e.g. 4029.
--cm_api_listen=IP:PORT Enables the claymore compatible api. IP:PORT is optional. If present, the IP:PORT combo
decides the interface(s) and port to listen to. Default is 127.0.0.1:3333. For
external access, use e.g. 0.0.0.0:3333. It's also valid to only specify the
port, e.g. 3334.
--cm_api_password=PSW Sets the required password for the CM compatible api interface.
When I add --apihost 127.0.0.1 --apiport 4444 or --apihost 192.168.1.3 --apiport 4444, neither works with claymore manager. With teamredminer, when I add --cm_api_listen 192.168.1.3:4444, it works with claymore manager.
I think is not implemented yet the crontol of Claymore with lolMiner
Anyway you can add this feature too? Teamredminer added it recently.
When I add --apihost 127.0.0.1 --apiport 4444 or --apihost 192.168.1.3 --apiport 4444, neither works with claymore manager. With teamredminer, when I add --cm_api_listen 192.168.1.3:4444, it works with claymore manager.
Code:
--api_listen=IP:PORT Enables the sgminer compatible api. IP:PORT is optional. If present, the IP:PORT combo
decides the interface(s) and port to listen to. Default is 127.0.0.1:4028. For
external access, use e.g. 0.0.0.0:4028. It's also valid to only specify the
port, e.g. 4029.
--cm_api_listen=IP:PORT Enables the claymore compatible api. IP:PORT is optional. If present, the IP:PORT combo
decides the interface(s) and port to listen to. Default is 127.0.0.1:3333. For
external access, use e.g. 0.0.0.0:3333. It's also valid to only specify the
port, e.g. 3334.
--cm_api_password=PSW Sets the required password for the CM compatible api interface.
When I add --apihost 127.0.0.1 --apiport 4444 or --apihost 192.168.1.3 --apiport 4444, neither works with claymore manager. With teamredminer, when I add --cm_api_listen 192.168.1.3:4444, it works with claymore manager.
I achieved 20 Mhs with x4, and 24.4 mhs in x8 gen3, on Opensuse and Xfce combo.
Thanks for help, these are usable numbers now!
Thanks for help, these are usable numbers now!
Hi All!
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
Sometimes depent on the drivers that you are using... one of the best are the 20.40 ... also depending on the free memory you have... or if you are using the intel GPU to leave more free memory, and of course the value --4g-alloc-size that you put.
Hi All!
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
Its normal because linux uses less recurses on the hardware, windows use background memory on each GPU and thats why it stop work there in resumen.
Hi All!
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
I tried Lolminer with rx 480 4GB in x16 slot, I got only 1.5/2.0Mhs either on windows, and Open Suse.
On HiveOs is can get between 10-15, it still weak numbers, but much better.
8Gb Cards works good.
Why I cant get this number on windows, or an other linux based system?
Can somebody help what I do wrong?
Thanks for the help.
The PCIE x16 method works - i am getting 25-26mh/s , which is x3 time more than regular.
I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?
Cheers and thanks for the great work.
I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?
Cheers and thanks for the great work.
Calculates from BTC Talk user: Miner29
Dag 393 = 27mh/s
Dag 400 = 21-22mh/s
Dag 405 = 14mh/s
Dag 415 = 5-6mh/s
The PCIE x16 method works - i am getting 25-26mh/s , which is x3 time more than regular.
I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?
Cheers and thanks for the great work.
I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?
Cheers and thanks for the great work.
6900xt testing here...
Seems like AMD new RX graphics cards are detected as 2 single GPUs:
Here ist the lolminer startup detection:
Setup Miner...
Device 0:
Name: Radeon 6800 series
Address: 45:0
Vendor: Advanced Micro Devices (AMD)
Memory: 16368 MByte (16304 MByte free)
Max epoch (approx): 1916
Active: true (Selected Algorithm: ETHash)
Device 1:
Name: Radeon 6800 series
Address: 45:0
Vendor: Advanced Micro Devices (AMD)
Memory: 16368 MByte (16304 MByte free)
Max epoch (approx): 1916
Active: true (Selected Algorithm: ETHash)
Then it starts DAG generation for "both" cards, but DAG generation for GPU1 never finishes!
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Finished DAG gen on GPU 0 (3941 ms)
And here ist the statistics. 60mh/s listed on "GPU 0" but "GPU 1" does nothing.
So...maybe alle Miners only use half of the RX graphics cards wasting 50% of their possible hashrate? That would be a possible 120-130mh/s ETHASH for a RX6900xt.
edit: starting lolminer two times with ETHASH does not work. DAG can only be generated once, maybe because both detected "cards" share the same memory.
edit2: all available miners show the RX cards with only half of the real compute units (CU). The 6900xt has 80 compute units but only 40 are detected.
Seems like AMD new RX graphics cards are detected as 2 single GPUs:
Here ist the lolminer startup detection:
Setup Miner...
Device 0:
Name: Radeon 6800 series
Address: 45:0
Vendor: Advanced Micro Devices (AMD)
Memory: 16368 MByte (16304 MByte free)
Max epoch (approx): 1916
Active: true (Selected Algorithm: ETHash)
Device 1:
Name: Radeon 6800 series
Address: 45:0
Vendor: Advanced Micro Devices (AMD)
Memory: 16368 MByte (16304 MByte free)
Max epoch (approx): 1916
Active: true (Selected Algorithm: ETHash)
Then it starts DAG generation for "both" cards, but DAG generation for GPU1 never finishes!
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Finished DAG gen on GPU 0 (3941 ms)
And here ist the statistics. 60mh/s listed on "GPU 0" but "GPU 1" does nothing.
So...maybe alle Miners only use half of the RX graphics cards wasting 50% of their possible hashrate? That would be a possible 120-130mh/s ETHASH for a RX6900xt.
edit: starting lolminer two times with ETHASH does not work. DAG can only be generated once, maybe because both detected "cards" share the same memory.
edit2: all available miners show the RX cards with only half of the real compute units (CU). The 6900xt has 80 compute units but only 40 are detected.
Nice to see it ... the 120-130Mhs is not possible... the bandwith is limited in 6900XT, the max should be around 65-66Mhs with a a big OC and MOD...
Hello, excellent program! I have been using for a few months with much success, I am a big fan of temperature monitoring of the vram on my 5700xts.
I have come across a recent issue which I dont know how to solve. When I mine with ethermine I have no problems. When I switch to flexpool, there is a serious issue. When the miner loses connection to the pool, upon reconnection, I get nothing but miner side stale shares. lolminer will loop for many hours with stales and reconnect attempts. All is well when I close and restart the miner. I do not know of a way to automate this process, and I have not had any success getting lolminer to rebuild the DAG or restart itself during this condition. Is there anyway to have a switch to trigger 'rebuild DAG after X stale shares'? I get constant reconnects but a new DAG or restart of the program seems to be a fix.
Many thanks!
I have come across a recent issue which I dont know how to solve. When I mine with ethermine I have no problems. When I switch to flexpool, there is a serious issue. When the miner loses connection to the pool, upon reconnection, I get nothing but miner side stale shares. lolminer will loop for many hours with stales and reconnect attempts. All is well when I close and restart the miner. I do not know of a way to automate this process, and I have not had any success getting lolminer to rebuild the DAG or restart itself during this condition. Is there anyway to have a switch to trigger 'rebuild DAG after X stale shares'? I get constant reconnects but a new DAG or restart of the program seems to be a fix.
Many thanks!
Jump to: