lolMiner 1.64: Fastest Kaspa miner in market - page 41.

dext-r

newbie

Activity: 17

Merit: 0

Quote from: mikecitt on February 23, 2021, 06:37:52 AM

Can you try benchmark mode on higher epoch on Asus Z170 PRO GAMING? (405-410)
That would be nice to see results.
[/quote]

I will try tomorrow or on friday, and share the results

Quote from: jgonzi on February 23, 2021, 10:24:05 AM

Really good analysis ...
[/quote]

Not analysis, just mining 24/7 with lot of 4g cards Grin

miner29

full member

Activity: 1275

Merit: 141

Quote from: Samayuki on February 24, 2021, 07:20:49 AM

Everyone keep talking about this lolminer but whenever I tried using with my rx580 the hashrate is way smaller that what phoenixminer or NB miner is giving me, is there something I don't get with this lolminer?

Well if you have 4gb card then lolminer is best choice. Getting 27mhs today on 4gb by having physically in long slot x16.

Samayuki

member

Activity: 574

Merit: 24

Everyone keep talking about this lolminer but whenever I tried using with my rx580 the hashrate is way smaller that what phoenixminer or NB miner is giving me, is there something I don't get with this lolminer?

jgonzi

member

Activity: 639

Merit: 19

Quote from: lonster27 on February 23, 2021, 11:47:58 AM

hey guys cant get miner to start. i loads up and gets stuck on Set Ethash stratum mode: Ethereum Proxy

what argument to i need to add to get this miner to start please

thanks

Which pool are you trying to connect?.

Normally happens that you are trying to connect to a SSL port but you didn't put the parameter --tls on

nucryptoenterprise

newbie

Activity: 2

Merit: 0

Hey been trying to figure this out forever and can't seem to find a solution to this error every time I'm running the miner bat file which says

"lolminer.exe' is not recognized as an internal or external command, operable program or batch file

It will then quit out the program...

I tried everything from reinstalling, adding exclusions to the folder in the anti virus settings , and even turned off firewall. Nothing seems to work and can't proceed.

I also made sure to restore it from the quarantine menu from my firewall settings

Any input would be appreciated thanks

lonster27

newbie

Activity: 1

Merit: 0

hey guys cant get miner to start. i loads up and gets stuck on Set Ethash stratum mode: Ethereum Proxy

what argument to i need to add to get this miner to start please

thanks

jgonzi

member

Activity: 639

Merit: 19

Quote from: dext-r on February 22, 2021, 04:49:52 PM

The MB is an Auros B450, I get 28 MH/s from the card in the x16 slot but only 14 from the card in the x4 slot.

You don't have luck with the board.

the results now on my boards

Asus Z170 PRO GAMING (26,7+26,6+20,2)
Asus Z170 PRO GAMING (25,9+25,6+19,3)
MSI Z170A GAMING M7 (25,9+19,6+16,8)
MSI Z270-A PRO (27,6+20,6)
Asus P8Z68-V PRO (22+22+15,8)
AsRock A55 Pro3 (25,2+16,0)
AsRock 880G Extreme3 (19,5+19,5+15,2)

[/quote]

Really good analysis ...

mikecitt

newbie

Activity: 17

Merit: 0

Quote from: dext-r on February 22, 2021, 04:49:52 PM

You don't have luck with the board.

the results now on my boards

Asus Z170 PRO GAMING (26,7+26,6+20,2)
Asus Z170 PRO GAMING (25,9+25,6+19,3)
MSI Z170A GAMING M7 (25,9+19,6+16,8)
MSI Z270-A PRO (27,6+20,6)
Asus P8Z68-V PRO (22+22+15,8)
AsRock A55 Pro3 (25,2+16,0)
AsRock 880G Extreme3 (19,5+19,5+15,2)

Can you try benchmark mode on higher epoch on Asus Z170 PRO GAMING? (405-410)
That would be nice to see results.

Bakhtra

full member

Activity: 215

Merit: 100

Quote from: jgonzi on February 23, 2021, 03:24:37 AM

Quote from: Bakhtra on February 22, 2021, 09:04:55 PM

I can only place 2 gpu on my z97 asus maximus vii formula. How can you place yours at last 3 slot? My 2nd gpu fan stick to back 3rd gpu, using sapphire 570.

The only solution opencase and try to fresh them from outside... Other options are complicated...

Ah, I see. Really hard yo, since my country so hot.

jgonzi

member

Activity: 639

Merit: 19

Quote from: Bakhtra on February 22, 2021, 09:04:55 PM

I can only place 2 gpu on my z97 asus maximus vii formula. How can you place yours at last 3 slot? My 2nd gpu fan stick to back 3rd gpu, using sapphire 570.

The only solution opencase and try to fresh them from outside... Other options are complicated...

yvliew

newbie

Activity: 13

Merit: 0

Epoch 397 just hit. And I got reduced hashrate now from 17.5 to 16.5

Bakhtra

full member

Activity: 215

Merit: 100

I can only place 2 gpu on my z97 asus maximus vii formula. How can you place yours at last 3 slot? My 2nd gpu fan stick to back 3rd gpu, using sapphire 570.

dext-r

newbie

Activity: 17

Merit: 0

The MB is an Auros B450, I get 28 MH/s from the card in the x16 slot but only 14 from the card in the x4 slot.
[/quote]

You don't have luck with the board.

the results now on my boards

Asus Z170 PRO GAMING (26,7+26,6+20,2)
Asus Z170 PRO GAMING (25,9+25,6+19,3)
MSI Z170A GAMING M7 (25,9+19,6+16,8)
MSI Z270-A PRO (27,6+20,6)
Asus P8Z68-V PRO (22+22+15,8)
AsRock A55 Pro3 (25,2+16,0)
AsRock 880G Extreme3 (19,5+19,5+15,2)

TGJ

jr. member

Activity: 173

Merit: 5

Quote from: jgonzi on February 22, 2021, 01:15:19 PM

Quote from: TGJ on February 21, 2021, 05:32:31 PM

What kind of hashrate should I expect to get using a PCIE x4 slot?

Depending also on the Gen version... if you are in Gen3 x 4 you should be around 20Mhs... depending on the OC...

The MB is an Auros B450, I get 28 MH/s from the card in the x16 slot but only 14 from the card in the x4 slot.

jgonzi

member

Activity: 639

Merit: 19

Quote from: TGJ on February 21, 2021, 05:32:31 PM

What kind of hashrate should I expect to get using a PCIE x4 slot?

Depending also on the Gen version... if you are in Gen3 x 4 you should be around 20Mhs... depending on the OC...

TGJ

jr. member

Activity: 173

Merit: 5

What kind of hashrate should I expect to get using a PCIE x4 slot?

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: jgonzi on February 21, 2021, 03:29:25 AM

Quote from: redtyhyt on February 20, 2021, 10:30:22 AM

Hi Lollie! Will you be adding Kawpow algorithm in the future release?

It has been an incredibly grow up of the price and the network in RVN...

RAVEN PAYS BETTER THAN ETH--

As of this morning, the NiceHash payout for RVN is still better than ETH. RVN is still minable on 3GB cards, also. --scryptr

jgonzi

member

Activity: 639

Merit: 19

Quote from: redtyhyt on February 20, 2021, 10:30:22 AM

Hi Lollie! Will you be adding Kawpow algorithm in the future release?

It has been an incredibly grow up of the price and the network in RVN...

redtyhyt

newbie

Activity: 15

Merit: 2

Hi Lollie! Will you be adding Kawpow algorithm in the future release?

jgonzi

member

Activity: 639

Merit: 19

Quote from: sfdave on February 19, 2021, 04:25:35 PM

Quote from: aalexanderr on February 18, 2021, 11:47:19 AM

Quote from: dext-r on February 16, 2021, 04:36:15 PM

Quote from: PowerSEOService on February 16, 2021, 03:16:58 PM

The PCIE x16 method works - i am getting 25-26mh/s , which is x3 time more than regular.

I am just wondering , anyone knows how long will this last ? Should we expect lowering of the Hash in the following month or it can be more ?
How can we calculate it ?

Cheers and thanks for the great work.

Calculates from BTC Talk user: Miner29

Dag 393 = 27mh/s
Dag 400 = 21-22mh/s
Dag 405 = 14mh/s
Dag 415 = 5-6mh/s

i think this calculation is wrong becouse right now dag 396 and i still have 28 mh/s at pcix16 gen3 while at pcix1 gen 2 it was 13mhs at dag 395 and right now at dag 369 i have 12 mhs

And if i put more ram to the mobo? 8 or 16gb?

As the colleague said... RAM is not the bottleneck. You should focus on getting GEN3 x maximum lines...

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 41. (Read 155842 times)