Pages:
Author

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 40. (Read 155842 times)

full member
Activity: 234
Merit: 100
Is it the same time every day this happens?

If it's for my problem, YES, I have a hash rate every night. That's why I'm looking for a way to restart the miner when the hashrate falls. With the phoenix miner I don't have this problem but with lol I have a higher hash rate. 8xRX580 sapphire nitro+ 8GB=250-256mh/s   Is it so difficult to make a command to restart the miner, almost all miners have one.
could you be specific. What os are you on. what happens. the miner keeps going with low hash or it crashes. Take screenshots or photos. There could be many issues cause u problems. Also, are you going of the miner hashrate or the pool?
newbie
Activity: 5
Merit: 0
Is it the same time every day this happens?

If it's for my problem, YES, I have a hash rate every night. That's why I'm looking for a way to restart the miner when the hashrate falls. With the phoenix miner I don't have this problem but with lol I have a higher hash rate. 8xRX580 sapphire nitro+ 8GB=250-256mh/s   Is it so difficult to make a command to restart the miner, almost all miners have one.
full member
Activity: 1275
Merit: 141
Is it the same time every day this happens?
newbie
Activity: 5
Merit: 0
Is there a command for the lol miner to restart if the megahash falls below certain values? Phoenix Miner has it and it is a very convenient feature.
That would not work well. As the hashrate of gpus decrease you would need to constantly adjust the threshold. Alternatively you could use hive, I believe they have that option built in to the os.

For me, it is enough to restart only the miner, not the whole system, because every day I watch Rig, but in the evening I go to bed and just then it happens that my hashrate falls. All other problems I can fix during the day. If anyone can help please.  thanks
full member
Activity: 234
Merit: 100
Is there a command for the lol miner to restart if the megahash falls below certain values? Phoenix Miner has it and it is a very convenient feature.
That would not work well. As the hashrate of gpus decrease you would need to constantly adjust the threshold. Alternatively you could use hive, I believe they have that option built in to the os.
newbie
Activity: 5
Merit: 0
Is there a command for the lol miner to restart if the megahash falls below certain values? Phoenix Miner has it and it is a very convenient feature.
member
Activity: 639
Merit: 19
The simplest is: http://polaris-bios-editor.eu/. Edit the BIOS with just one click timing patch. You must first memorize the original BIOs and save it if something goes wrong. Then edit the copy of the original BIOS with the specified program. After editing the BIOS, flash the new BIOS with: https://www.techpowerup.com/download/ati-atiflash/.
      I don't think you need 1200 MHz for GPU. For me, 1150 MHz hashes the same as 1200 MHz or higher. A lower frequency will allow you to better undervolt and save more electricity.

Thanks for the BIOS info.

And good suggestion.  I'll mod the GPU setting

**edit - crazy, that alone just dropped an overall 20w

It has made you the good recommendation for your rig ☺
newbie
Activity: 31
Merit: 0
Mr. developer, can you give any hints, when can we expect a new and improved version of lolminer?
jr. member
Activity: 60
Merit: 2
The simplest is: http://polaris-bios-editor.eu/. Edit the BIOS with just one click timing patch. You must first memorize the original BIOs and save it if something goes wrong. Then edit the copy of the original BIOS with the specified program. After editing the BIOS, flash the new BIOS with: https://www.techpowerup.com/download/ati-atiflash/.
      I don't think you need 1200 MHz for GPU. For me, 1150 MHz hashes the same as 1200 MHz or higher. A lower frequency will allow you to better undervolt and save more electricity.

Thanks for the BIOS info.

And good suggestion.  I'll mod the GPU setting

**edit - crazy, that alone just dropped an overall 20w
hero member
Activity: 711
Merit: 500
So I took the suggestion from some of you and placed HiveOS on one rig.  It appears that I have it up and running and it's mining ETH via lolminer.
It's going at 21.  So about the same as what it was on Windows with no overclocking settings.
What would you suggest for AMD RX570 8GB cards?  I'm using one of the more popular templates suggested.
And how do you undervolt the power?  it doesn't seem to accept a "-10"

So I've gotten a little further in my new journey, and I have the 1st rig setup with HiveOS. (off a USB of all things)  I have (2) identical rigs so I'm trying to get this working correctly before I call it good and do the other rig.

While I have been able to get a lower rate of wattage down, and it appears to be more stable (for the moment).  I'm still only getting 21.8mh/s.  Which is about 1-2mh lower than when I was running on Windows. I've played around with the overclocking settings and unless others have a better suggestion this appears to be the best I can get.

Keeping in mind my BIOS is still stock on the GPU.  Though I thought I was reading where some, with stock BIOS, where getting around 26-29mh/s.  So... I was hoping.

Is this the best I can get off this as it is?

I'm guessing it will be suggested to carry forward and mod the bios if I want to get more out of it.  So I guess that will be the next step.  Interested in thoughts and opinions.



The simplest is: http://polaris-bios-editor.eu/. Edit the BIOS with just one click timing patch. You must first memorize the original BIOs and save it if something goes wrong. Then edit the copy of the original BIOS with the specified program. After editing the BIOS, flash the new BIOS with: https://www.techpowerup.com/download/ati-atiflash/.
      I don't think you need 1200 MHz for GPU. For me, 1150 MHz hashes the same as 1200 MHz or higher. A lower frequency will allow you to better undervolt and save more electricity.
jr. member
Activity: 60
Merit: 2
Change  REF to 30, and remove the PowerLimit... also I really recommend you to make a BIOS mod... that will change to 30Mhs... that's a really big improvement...

Thanks jgonzi, I appreciate that.
Are these the correct locations I need to go to upgrade/change the GPU bios for the RX 570?
Polaris Editor  http://polaris-bios-editor.eu/
RBE (Igorslab) https://www.igorslab.de/en/red-bios-editor-and-morepowertool-adjust-and-optimize-your-vbios-and-even-more-stable-overclocking-navi-unlimited/

Yes there are lot of YouTube videos too... have a look to them always first...

will do.  If you know of any suggested youtube videos above others, please let me know.  (as I'm sure there are tons)
member
Activity: 639
Merit: 19
Change  REF to 30, and remove the PowerLimit... also I really recommend you to make a BIOS mod... that will change to 30Mhs... that's a really big improvement...

Thanks jgonzi, I appreciate that.

Are these the correct locations I need to go to upgrade/change the GPU bios for the RX 570?

Polaris Editor  http://polaris-bios-editor.eu/
RBE (Igorslab) https://www.igorslab.de/en/red-bios-editor-and-morepowertool-adjust-and-optimize-your-vbios-and-even-more-stable-overclocking-navi-unlimited/

Yes there are lot of YouTube videos too... have a look to them always first...
jr. member
Activity: 60
Merit: 2
Change  REF to 30, and remove the PowerLimit... also I really recommend you to make a BIOS mod... that will change to 30Mhs... that's a really big improvement...

Thanks jgonzi, I appreciate that.

Are these the correct locations I need to go to upgrade/change the GPU bios for the RX 570?

Polaris Editor  http://polaris-bios-editor.eu/
RBE (Igorslab) https://www.igorslab.de/en/red-bios-editor-and-morepowertool-adjust-and-optimize-your-vbios-and-even-more-stable-overclocking-navi-unlimited/
member
Activity: 639
Merit: 19
So I took the suggestion from some of you and placed HiveOS on one rig.  It appears that I have it up and running and it's mining ETH via lolminer.
It's going at 21.  So about the same as what it was on Windows with no overclocking settings.
What would you suggest for AMD RX570 8GB cards?  I'm using one of the more popular templates suggested.
And how do you undervolt the power?  it doesn't seem to accept a "-10"

So I've gotten a little further in my new journey, and I have the 1st rig setup with HiveOS. (off a USB of all things)  I have (2) identical rigs so I'm trying to get this working correctly before I call it good and do the other rig.

While I have been able to get a lower rate of wattage down, and it appears to be more stable (for the moment).  I'm still only getting 21.8mh/s.  Which is about 1-2mh lower than when I was running on Windows. I've played around with the overclocking settings and unless others have a better suggestion this appears to be the best I can get.

Keeping in mind my BIOS is still stock on the GPU.  Though I thought I was reading where some, with stock BIOS, where getting around 26-29mh/s.  So... I was hoping.

Is this the best I can get off this as it is?

I'm guessing it will be suggested to carry forward and mod the bios if I want to get more out of it.  So I guess that will be the next step.  Interested in thoughts and opinions.





Change  REF to 30, and remove the PowerLimit... also I really recommend you to make a BIOS mod... that will change to 30Mhs... that's a really big improvement...
jr. member
Activity: 60
Merit: 2
So I took the suggestion from some of you and placed HiveOS on one rig.  It appears that I have it up and running and it's mining ETH via lolminer.
It's going at 21.  So about the same as what it was on Windows with no overclocking settings.
What would you suggest for AMD RX570 8GB cards?  I'm using one of the more popular templates suggested.
And how do you undervolt the power?  it doesn't seem to accept a "-10"

So I've gotten a little further in my new journey, and I have the 1st rig setup with HiveOS. (off a USB of all things)  I have (2) identical rigs so I'm trying to get this working correctly before I call it good and do the other rig.

While I have been able to get a lower rate of wattage down, and it appears to be more stable (for the moment).  I'm still only getting 21.8mh/s.  Which is about 1-2mh lower than when I was running on Windows. I've played around with the overclocking settings and unless others have a better suggestion this appears to be the best I can get.

Keeping in mind my BIOS is still stock on the GPU.  Though I thought I was reading where some, with stock BIOS, where getting around 26-29mh/s.  So... I was hoping.

Is this the best I can get off this as it is?

I'm guessing it will be suggested to carry forward and mod the bios if I want to get more out of it.  So I guess that will be the next step.  Interested in thoughts and opinions.



member
Activity: 639
Merit: 19
Date            Epoch  Hash
19.02.2021   396   28,5
23.02.2021   397   28,35
27.03.2021   405   27,24
16.04.2021   410   26,37
26.05.2021   420   20,98
23.09.2021   450   12,47
07.04.2022   499   7,91
28.10.2022   550   5,96
09.06.2024   700   3,85


Do you mean 470/480/570/580 4G cards mining only have 2~3 months life only?

If they have 2 months on ETH that's great

Incredible... how long can still mining with proper configuration...
newbie
Activity: 17
Merit: 0
Date            Epoch  Hash
19.02.2021   396   28,5
23.02.2021   397   28,35
27.03.2021   405   27,24
16.04.2021   410   26,37
26.05.2021   420   20,98
23.09.2021   450   12,47
07.04.2022   499   7,91
28.10.2022   550   5,96
09.06.2024   700   3,85


Do you mean 470/480/570/580 4G cards mining only have 2~3 months life only?

If they have 2 months on ETH that's great
newbie
Activity: 45
Merit: 0
Date            Epoch  Hash
19.02.2021   396   28,5
23.02.2021   397   28,35
27.03.2021   405   27,24
16.04.2021   410   26,37
26.05.2021   420   20,98
23.09.2021   450   12,47
07.04.2022   499   7,91
28.10.2022   550   5,96
09.06.2024   700   3,85


Do you mean 470/480/570/580 4G cards mining only have 2~3 months life only?
jr. member
Activity: 60
Merit: 2
So I took the suggestion from some of you and placed HiveOS on one rig.  It appears that I have it up and running and it's mining ETH via lolminer.

It's going at 21.  So about the same as what it was on Windows with no overclocking settings.

What would you suggest for AMD RX570 8GB cards?  I'm using one of the more popular templates suggested.

And how do you undervolt the power?  it doesn't seem to accept a "-10"
newbie
Activity: 6
Merit: 0
Date            Epoch  Hash
19.02.2021   396   28,5
23.02.2021   397   28,35
27.03.2021   405   27,24
16.04.2021   410   26,37
26.05.2021   420   20,98
23.09.2021   450   12,47
07.04.2022   499   7,91
28.10.2022   550   5,96
09.06.2024   700   3,85
Pages:
Jump to: