Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 53. (Read 155842 times)

Testing version 1.20 with DUAL Mining EZIL... Using in my case a 2Miners pool ETH + EZIL for ZIL...  
It is important to have a stable rig, because if you have problems of cards going down on new DAG or too much undervolt, it can make stop working some card in the ZIL switch... If that happens look which card goes to 0 to increase the voltage for that card:

Statistics (00:22:18); Mining: Ethash
Connected to: eth.2miners.com:2020
Uptime: 1h 26m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           93.74    49.71    49.77    52.99    53.02    49.77    49.83    398.83
Pool (mh/s):           103.10    38.87    57.47    43.94    60.85    32.11    60.85    397.19
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   19/0/0   36/0/0   235/0/0
Power (W):              212.4     89.2     89.0     97.5     78.4     88.5     84.0     739.0
Efficiency (mh/s/W):    0.440    0.554    0.556    0.541    0.672    0.559    0.590     0.540
Temp (deg C):              63       60       60       62       61       64       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       80       80       82       80          
Fan Speed (%):             72       54       53       60       36       40       60          
---------------------------------------------
Average speed (10s): 93.79mh/s | 49.67mh/s | 49.68mh/s | 53.05mh/s | 52.96mh/s | 49.74mh/s | 49.82mh/s Total: 398.70 mh/s
GPU 5: Found a share of difficulty 16.44G
GPU 5: Share accepted (37 ms)
Eth: New job received: 0xcae4bb Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xc37df3 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x7e74ac Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.82mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.93mh/s | 49.74mh/s | 49.81mh/s Total: 398.70 mh/s
Eth: New job received: 0xfe50f6 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.72mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.90mh/s | 49.76mh/s | 49.86mh/s Total: 398.64 mh/s
Eth: New job received: 0x20bd98 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x59b662 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x570e43 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xf6360f Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.80mh/s | 49.65mh/s | 49.65mh/s | 53.05mh/s | 52.93mh/s | 49.73mh/s | 49.85mh/s Total: 398.65 mh/s
Eth: New job received: 0x7d9c64 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.78mh/s | 49.66mh/s | 49.65mh/s | 53.05mh/s | 52.96mh/s | 49.76mh/s | 49.70mh/s Total: 398.56 mh/s
Eth: New job received: 0xe62556 Epoch: 390 Target: 000000007e000000
Activating ZIL connection: ZIL shard epoch active.
Zil: New job received: 0xb7a494 Epoch: 0 Target: 000000007fd9e5ba
-------------------------------------------------------
         Generating light cache for epoch 0
-------------------------------------------------------
-------------------------------------------------------
     Done (525 ms), size of new DAG: 1024 MByte
-------------------------------------------------------
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Start DAG gen on GPU 2 (normal mode)
Start DAG gen on GPU 5 (normal mode)
Start DAG gen on GPU 3 (normal mode)
Start DAG gen on GPU 6 (normal mode)
Start DAG gen on GPU 4 (normal mode)
Finished DAG gen on GPU 0 (457 ms)
Finished DAG gen on GPU 3 (1281 ms)
Finished DAG gen on GPU 1 (1333 ms)
Finished DAG gen on GPU 2 (1333 ms)
Finished DAG gen on GPU 4 (1343 ms)
Finished DAG gen on GPU 5 (1375 ms)
Finished DAG gen on GPU 6 (1434 ms)
Average speed (10s): 84.60mh/s | 40.48mh/s | 40.48mh/s | 43.87mh/s | 43.50mh/s | 40.48mh/s | 40.37mh/s Total: 333.77 mh/s
---------------------------------------------
Statistics (00:23:18); Mining: Ethash
Connected to: eu.ezil.me:5555
Uptime: 1h 27m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           92.33    48.22    48.16    51.58    51.33    48.19    48.29    388.11
Pool (mh/s):           101.92    38.43    56.81    43.44    60.15    33.41    60.15    394.29
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   20/0/0   36/0/0   236/0/0
Power (W):              212.4     89.5     89.4     97.5     78.3     88.3     84.5     739.9
Efficiency (mh/s/W):    0.434    0.536    0.535    0.526    0.652    0.543    0.568     0.525
Temp (deg C):              63       60       60       62       61       63       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       78       80       82       80          
Fan Speed (%):             72       55       53       60       36       40       60  

It is a good Mining OS too...

This will allow you to update to all the new miners to current versions and add ones never support officially.

https://github.com/cynixx3/third-party-miner-installer-for-ethos

I run it on all of my ethos rigs. Ive moved newer cards to rigs on mmpOS because support beyond 10xx and 5xx series cards is limited or no existent on ethos. 

very good features. I am wondering if the algo mix can be done only with ETH+ETC or with some other algos, like ETH+BEAM. I will try.

Good for my rig with ethos. At the moment I have the lolminer integrated in the system that is mining ETH with the 8gb cards and then I run another instance with lolminer to mine beam.
I can do everything with the integrated miner with the 1.20. Very very very goooooooodddd

I think there is a new realease in the github of the developer... 1.20

There are some interesting things for mix Rig with 8Gb and 4 Gb... and also interesting for making dualmining ETH+ZIL and ETC+ZIL... that is quite interesting because if you change your 4GB card to mine ETC you can get a nice extra mining the ZIL... nice job!!

That the max... no other option... only  have Gen2 in the BIOS or try Gen3 if works...  With Gen3 you should have some more performance if works...

well i was using 4080 , should increase or vice versa ?

With the last EPOCH is normal, now you depend on the --4g-alloc-size value you have and the Memory and Core OC...

Hello! How much are you getting on rx 4xx 5xx on 1.19 now ?

Im from 15 till 17 , was 20-21

I have read other people saying that some stales come from that pool... probably some update...

Ethermine.  I did several restarts and it finally got back to about 100%.  I am seeing more slightly more stale shares from the poolside.  Probably poolside issue.

In which pool are you mining?...  now with the new epoch the Mhs of the 4Gb have got reduced a little bit more... but 8Gb should not be affected. Sometimes a restart is usefull if not well generated new DAG

New epoch today cause all my 8gb cards to lose a bit of hash. Also getting a bunch of rejected shares too.  Is this pool side? or the miner?

Normally that is an extra OC or extra Undervolt, if you want to put your values we can help you. Also sometimes if it is always the same card could be the riser or the PSU. I have my rigs running for weeks with out any reboot in lolminer.

I tried using this miner, but am getting "stuck device detected invoking emergency script" on several rigs, and nothing happens after that.

Any ideas?

Yes of course, you can contact him directly by severas ways:

- Telegram in lolMiner group
- Discord for example Team Red Panda
- And in this thread too
-

Is there any support from dev?

The fee if is in the 1rst page, normally other miner take a fee of 1%. That fee means after 2hours the miner is used to the wallet of lolMiner for 50s.

 

May I ask Lolminer how to receive 0.7% mining dev fee?  I haven't seen no information about it.