lolMiner 1.64: Fastest Kaspa miner in market - page 48.

jgonzi

member

Activity: 639

Merit: 19

Quote from: gathermind on February 08, 2021, 11:15:45 AM

Hi all,

Can I build a Rig that have 6 cards, mining GPU0/1/2 into wallet"A", mining GPU3/4/5 into wallet"B"?

Can Lolminer do that? Please give me some hints!

Thanks...

You have to run 2 instances... first with --devices 0,1,2 and the 2nd should run --devices 3,4,5

Each with his wallet.

casslo

newbie

Activity: 9

Merit: 0

Quote from: Morph42 on February 08, 2021, 01:32:48 PM

Quote from: casslo on February 08, 2021, 01:23:17 PM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

tried it, wait like 20min and it made it, in my case mine put on autozombie at 12.5 the x16 card and go up 24mhz, we can tune up it manually and change the tune on zombie mode??

It is crazy that 4GB miners are getting that rate. It'd be awesome if you could apply zombie mode to the 8GB cards and get higher hashrates too

I agree, it's insane, sadly my motherboard just have 1 x16 slot and six X1, i just can use that boost on 1 card

Morph42

jr. member

Activity: 60

Merit: 2

Quote from: casslo on February 08, 2021, 01:23:17 PM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

tried it, wait like 20min and it made it, in my case mine put on autozombie at 12.5 the x16 card and go up 24mhz, we can tune up it manually and change the tune on zombie mode??

It is crazy that 4GB miners are getting that rate. It'd be awesome if you could apply zombie mode to the 8GB cards and get higher hashrates too

casslo

newbie

Activity: 9

Merit: 0

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

tried it, wait like 20min and it made it, in my case mine put on autozombie at 12.5 the x16 card and go up 24mhz, we can tune up it manually and change the tune on zombie mode??

Blisk

sr. member

Activity: 412

Merit: 250

yes you are right. I checked my test PC and nothing for now.

PerfectCircle

member

Activity: 252

Merit: 11

Quote from: koppees on February 08, 2021, 11:23:25 AM

Quote from: PerfectCircle on February 08, 2021, 10:54:11 AM

Quote from: koppees on February 08, 2021, 08:01:54 AM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

Can you link the riser you are using? I ordered this one from a local web-shop. https://www.1a.ee/p/kolink-pci-express-16x-auf-16x-riser-kabel-inkl-molex-stromkabel-19cm/1mzb

Get better risers mate, the one in your picture will not last long as I used to use something like that in the past they are not working anymore now, I have to get the 009s risers, even the 005,006 editions works

https://www.amazon.com/dp/B074P34647/ref=cm_sw_r_cp_apa_fabc_FXQNXV16201J7E2713V1?_encoding=UTF8&psc=1

OMG, you do not even understand, what we are talking about here. The risers that you are suggesting have ONLY 1x link speed between GPU and motherboard. But we need 16x link speed risers, for getting max hashrate out of 4GB video cards with lolminer.

So you guys really believes in this lolminer 4gb magic touch? I don't believe in that crap because it's cheating and unrealistic too, anyways I'm glad that 4gb gpu owners can still make good amount of money out of the old cards, enjoy it while it lasts

koppees

newbie

Activity: 31

Merit: 0

Quote from: Blisk on February 08, 2021, 12:28:56 PM

Downloaded latest lolminer posted fev minutes ago and this is what I get
http://shrani.si/f/1h/pf/Tv0TjHH/2021-02-08-182146-window.png

OMG!!! There is no latest 1.23 lolminer. It is most probably a malware you downloaded.

Blisk

sr. member

Activity: 412

Merit: 250

Downloaded latest lolminer posted fev minutes ago and this is what I get

koppees

newbie

Activity: 31

Merit: 0

Quote from: Blisk on February 08, 2021, 12:02:17 PM

Quote from: koppees on February 08, 2021, 08:52:34 AM

Quote from: Blisk on February 08, 2021, 08:16:03 AM

I get with lolminer only 0.31 Mh/s when I use to get 12 Mh/s
What to do to increase this back to 12 Mh/s.
I have run mine_eth_4G.bat

Why are you still using Windows? Everyone has already migrated to Linux-based mining OS-es.

I know that but still if I get before out 12 MH/s why I can't get the same now?

With each new ETH epoch, DAG file size increases, which makes 4GB video cards more and more inefficient. What lolminer does, is cheating and postponing little bit the inevitable.

Blisk

sr. member

Activity: 412

Merit: 250

Quote from: koppees on February 08, 2021, 08:52:34 AM

Quote from: Blisk on February 08, 2021, 08:16:03 AM

I get with lolminer only 0.31 Mh/s when I use to get 12 Mh/s
What to do to increase this back to 12 Mh/s.
I have run mine_eth_4G.bat

Why are you still using Windows? Everyone has already migrated to Linux-based mining OS-es.

I know that but still if I get before out 12 MH/s why I can't get the same now?

Branko

sr. member

Activity: 2632

Merit: 328

Quote from: PerfectCircle on February 08, 2021, 10:54:11 AM

Quote from: koppees on February 08, 2021, 08:01:54 AM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

Can you link the riser you are using? I ordered this one from a local web-shop. https://www.1a.ee/p/kolink-pci-express-16x-auf-16x-riser-kabel-inkl-molex-stromkabel-19cm/1mzb

Get better risers mate, the one in your picture will not last long as I used to use something like that in the past they are not working anymore now, I have to get the 009s risers, even the 005,006 editions works

https://www.amazon.com/dp/B074P34647/ref=cm_sw_r_cp_apa_fabc_FXQNXV16201J7E2713V1?_encoding=UTF8&psc=1

His riser is 16X though, and your is poor 1X

koppees

newbie

Activity: 31

Merit: 0

Quote from: PerfectCircle on February 08, 2021, 10:54:11 AM

Quote from: koppees on February 08, 2021, 08:01:54 AM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

Can you link the riser you are using? I ordered this one from a local web-shop. https://www.1a.ee/p/kolink-pci-express-16x-auf-16x-riser-kabel-inkl-molex-stromkabel-19cm/1mzb

Get better risers mate, the one in your picture will not last long as I used to use something like that in the past they are not working anymore now, I have to get the 009s risers, even the 005,006 editions works

https://www.amazon.com/dp/B074P34647/ref=cm_sw_r_cp_apa_fabc_FXQNXV16201J7E2713V1?_encoding=UTF8&psc=1

OMG, you do not even understand, what we are talking about here. The risers that you are suggesting have ONLY 1x link speed between GPU and motherboard. But we need 16x link speed risers, for getting max hashrate out of 4GB video cards with lolminer.

gathermind

newbie

Activity: 45

Merit: 0

Hi all,

Can I build a Rig that have 6 cards, mining GPU0/1/2 into wallet"A", mining GPU3/4/5 into wallet"B"?

Can Lolminer do that? Please give me some hints!

Thanks...

PerfectCircle

member

Activity: 252

Merit: 11

Quote from: koppees on February 08, 2021, 08:01:54 AM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

Can you link the riser you are using? I ordered this one from a local web-shop. https://www.1a.ee/p/kolink-pci-express-16x-auf-16x-riser-kabel-inkl-molex-stromkabel-19cm/1mzb

Get better risers mate, the one in your picture will not last long as I used to use something like that in the past they are not working anymore now, I have to get the 009s risers, even the 005,006 editions works

https://www.amazon.com/dp/B074P34647/ref=cm_sw_r_cp_apa_fabc_FXQNXV16201J7E2713V1?_encoding=UTF8&psc=1

koppees

newbie

Activity: 31

Merit: 0

Quote from: meltman on February 08, 2021, 10:05:45 AM

i'm new and run the miner out of the box, created a wallet and added my wallet address and a mining pool, it runs for 10 minutes. when should something happen in my wallet? im just curious and want to try out mining

I am sorry, but you need to learn a lot more about crypto mining. There are countless tutorials on Youtube. No point of repeating everything a millionth time here in this topic.

meltman

newbie

Activity: 1

Merit: 0

i'm new and run the miner out of the box, created a wallet and added my wallet address and a mining pool, it runs for 10 minutes. when should something happen in my wallet? im just curious and want to try out mining

koppees

newbie

Activity: 31

Merit: 0

Quote from: Blisk on February 08, 2021, 08:16:03 AM

I get with lolminer only 0.31 Mh/s when I use to get 12 Mh/s
What to do to increase this back to 12 Mh/s.
I have run mine_eth_4G.bat

Why are you still using Windows? Everyone has already migrated to Linux-based mining OS-es.

RAKOT

jr. member

Activity: 152

Merit: 8

Quote from: koppees on February 08, 2021, 08:01:54 AM

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

Can you link the riser you are using? I ordered this one from a local web-shop. _link_

I found this risers from the othe mess of risers and wires. So I dont remember from where Ive got it. But its like on the picture except power cable.

Blisk

sr. member

Activity: 412

Merit: 250

I get with lolminer only 0.31 Mh/s when I use to get 12 Mh/s
What to do to increase this back to 12 Mh/s.
I have run mine_eth_4G.bat

koppees

newbie

Activity: 31

Merit: 0

Quote from: RAKOT on February 08, 2021, 04:58:58 AM

Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.

Was a little mess with zombie auto tune on riser , but then set to auto seems normal.

in my case its 15

Can you link the riser you are using? I ordered this one from a local web-shop. https://www.1a.ee/p/kolink-pci-express-16x-auf-16x-riser-kabel-inkl-molex-stromkabel-19cm/1mzb

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 48. (Read 155842 times)