PLEASE ADD:
1-OC settings
2-STRAPS
then it will be best miner in the world.......!
Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 49. (Read 155842 times)
Well. I can confirm that in PCI-ex 16x slot even with 16x-16x riser speed is up to 28M.
Was a little mess with zombie auto tune on riser , but then set to auto seems normal.
in my case its 15
Was a little mess with zombie auto tune on riser , but then set to auto seems normal.
in my case its 15
thank you i dont know what should write in config to run zambi mod i wrote it but dont start to mine ver 1.22
--zombie-tune
--4g-alloc-size 4080
--4g-alloc-size 4076
--gpu-alloc-size 4080 or 4072
It is good to try medium values 4078 and 4076...the biggest working the most performance Mhs will get achieved
--gpu-alloc-size 4080 or 4072
Guys what kind of settings do you put in the miner for 4 GB RX 570 and other 4 GB GPUs? Also what drivers are best to use at the moment?
I can't seem to make it work. On Windows it keeps telling me I have no OpenCL devices and on HiveOS just nothing happens.
I can't seem to make it work. On Windows it keeps telling me I have no OpenCL devices and on HiveOS just nothing happens.
but wait, how? i mean, i put mine on the x16 port and i got the same hashrate like using the riser, it take 10min to get more hashrate or what?
Tomorrow, I will buy 1 a mainboard with 3 pcie x16 and 2x8GB bus3200+
To try 3 cards at oncetime.
To try 3 cards at oncetime.
Does it mean lolMiner 1.22 permanently solve the DAG problem of Rx470/570/480/580 4G card?
Normally ATX motherboard can provide 2 pci-Ex16. That means two AMD 4G cards can work same hm/s as 8G cards, right?!
Moreover, can 4G cards run zombie mode mixed with 8G cards with risers? Lolminer can recognize them respectively?
Sorry for lots of questions, because I am a newbie...
Normally ATX motherboard can provide 2 pci-Ex16. That means two AMD 4G cards can work same hm/s as 8G cards, right?!
Moreover, can 4G cards run zombie mode mixed with 8G cards with risers? Lolminer can recognize them respectively?
Sorry for lots of questions, because I am a newbie...
I'm now getting around 27 mhs an increase of 10, pretty amazing. 
Can you provide us with the configuration you have? What card? How much RAM you have? Is the card on risers or Is It mounted directly to the mobo? What mobo?
Sure, this is now my only 4gb card and is in my general use pc which normally runs as a Hackintosh running Big Sur but when not in use I boot into HiveOS
The card is a Sapphire RX 570 4gb (Elpida memory) one click bios modded mounted on motherboard in 16x pcie slot.
motherboard = GA-Z170X-Gaming 3 (rev. 1.0)
Memory 16gb
Overclock settings in HiveOS = core 1100, DPM 2, VDD 900, Mem 1950, Ref 20.
Beginning to wish I hadn't sold my other 4gb cards now, lol.
I'm now getting around 27 mhs an increase of 10, pretty amazing.
Can you provide us with the configuration you have? What card? How much RAM you have? Is the card on risers or Is It mounted directly to the mobo? What mobo?
https://www.motherboarddb.com/media/images/Asus/ROG%20Strix%20Z390-F%20Gaming/ROG_Strix_Z390-F_Gaming-1.jpg
What mainboard have many pciex16 for using 4GB mining ETH is the best ?
I see 2 pciex x16 +1 pciex x4 is maximum.
What mainboard have many pciex16 for using 4GB mining ETH is the best ?
I see 2 pciex x16 +1 pciex x4 is maximum.
Still experiencing lower hashrate on cards 2-5/6, tried on many different rigs.
Not sure what is the cause for this.
Not sure what is the cause for this.
I'm now getting around 27 mhs an increase of 10, pretty amazing.
It gave me 27.5 mhs on a b450 ryzen board with 16 gigs of 3200 mhz ram, but it was autotuning for about 4-5 minutes
I confirm the 1.22 gave me back around 2.5 mhs per card. Amazing! RX570 4gb mounted on risers are hashing 15mhs.
I noticed also an increase of power consumption. Around 30W total per rig (4 cards working as zombies).
I noticed also an increase of power consumption. Around 30W total per rig (4 cards working as zombies).
ummmm i tried it RN and hashrate is the same plugged on x16 mobo / riser.
Quote
thank you i dont know what should write in config to run zambi mod i wrote it but dont start to mine ver 1.22
--zombie-tune
--4g-alloc-size 4080
Zombie mode should start automatically no settings needed.
what is lolminer setting in hiveos to mine with 4GB cards?always dont work for me 
you dont have discord server?
you dont have discord server?
Well not an own discord server, but a channel within the red panda discord. Also I got an own telegram channel if you need quick / direct contact
Can you share your error message you have with the miner? On latest hive stable image it should be as easy as creating a lolMiner flight sheet and go. No extra options for the 4G cards urgently required. It still is recommended to add --4g-alloc-size parameter to the user arguments, which will improve performance. Check 4076 first. If miner starts check 4078 and then 4080, which is highest I know to be stable on most machines.
now i have to find a way to hookup all 20 older ones directly, when i asked a while ago how to make 4gb gpus mine longer in one of the threads and i said there will be a way one of the people said i was being really stupid
Lolliedeb, thank you very much
Lolliedeb, thank you very much
Always welcome. I think its not unveiling anything when I say I am happy to do so, because well - when starting with Ethash I was kind of the underdog out there - and still my share is not huge, but large enough to be worth it by margin. Well and most of that is due to the zombie mode
I will try to keep this 4G cards as long profitable as possible. Still need to be serious - we maybe got an other month. With cheap electricity or the GPU in a x8 or x16 slot maybe two month, but the things that can be done are limited time effects :/ Hi Lollie! Great work on 1.22!
Any solution for older R9 290/290x?
)THX!
Jump to: