0-monitor 1-rx5700 2-7-rx470_4gb
RAVEOS 1.0.24 ( 1851 ) 5.10.0-rc6-mining-mod( 8548 ) BETA
DAG 387 BIOS GEN2
--4g-alloc-size 4082 --zombie-tune 2
181.58 Mh/s 54.02 21.81 21.28 20.60 20.90 21.17 21.80
--4g-alloc-size 4082 --zombie-tune 1
182.33 Mh/s 54.08 21.61 20.46 21.14 21.82 21.96 21.26
TRM --eth_4g_max_alloc=4082
185.12 Mh/s 54.23 22.02 20.98 21.62 22.20 22.29 21.78
Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 58. (Read 155842 times)
I tried 1.18 with tune 2 and without it ..hash was better than 1.16 but twice my rig crashed and got frozen
Windows / Linux OS?
Drivers?
Which line of config?
All that information can help ...
I tried 1.18 with tune 2 and without it ..hash was better than 1.16 but twice my rig crashed and got frozen
Does Tahiti work with ZM?
It says GPU insufficient memory and GPU will be paused..
It says GPU insufficient memory and GPU will be paused..
i dont know what am i doing wrong but on windows i cant get good speed. rx470 4g showing 9mhs
best result is 4024 if i go up or down i get 3mhs. nothing helps
best result is 4024 if i go up or down i get 3mhs. nothing helps
With windows you need a 1st card to let the 4Gb more space... so if you have a CPU Intel with integrated GPU active it and connect there the monitor or if you have a 8Gb card in the Rig put the 8Gb as first with the Monitor attached.
That will let you lot more space in the memory to mine... With linux it use lot less for this reason people can use 4076-4080...
Rig has intel integrated and connected allready. rig has total 9gpu 2 of them is 4g only. is it windows making this? on etc no problem they mine with 30mhs
i dont know what am i doing wrong but on windows i cant get good speed. rx470 4g showing 9mhs
best result is 4024 if i go up or down i get 3mhs. nothing helps
best result is 4024 if i go up or down i get 3mhs. nothing helps
With windows you need a 1st card to let the 4Gb more space... so if you have a CPU Intel with integrated GPU active it and connect there the monitor or if you have a 8Gb card in the Rig put the 8Gb as first with the Monitor attached.
That will let you lot more space in the memory to mine... With linux it use lot less for this reason people can use 4076-4080...
i dont know what am i doing wrong but on windows i cant get good speed. rx470 4g showing 9mhs
best result is 4024 if i go up or down i get 3mhs. nothing helps
best result is 4024 if i go up or down i get 3mhs. nothing helps
Finally managed to configure zombie-mode properly. Getting 24 MH/s with RX580 4GB cards at current ETH epoch.
24mhs maybe till yesterday. Now in the new epoch I am getting 22mhs more or less.
Cards impossible to find at normal prices. Before this crazyness I didn't close a deal for 10 EUR per card...what a stupid idea ahahah
Which configuration line do you use for the 22Mhs?.
It would be helpful to have some lines to see the different config files
Finally managed to configure zombie-mode properly. Getting 24 MH/s with RX580 4GB cards at current ETH epoch.
24mhs maybe till yesterday. Now in the new epoch I am getting 22mhs more or less.
Cards impossible to find at normal prices. Before this crazyness I didn't close a deal for 10 EUR per card...what a stupid idea ahahah
Finally managed to configure zombie-mode properly. Getting 24 MH/s with RX580 4GB cards at current ETH epoch.
If you don't have Gen2 the --zombie-tune 2 will not work and you should change 2 for 1 or 0.
The idea is to run miner-show, to see why it crash. Without that information is not possible to know where is the problem.
ZM 0 is why it crashed
it runs ZM 2 and 1 no problem
ZM 2 the 4 cards run about 7Mh
ZM 1 the 4 cards run about 17Mh
im assuming the hashrate drop is because of the pcie splitter, im swapping mobos later to make sure
but ZM 0 crashes all my rigs, not just the problem one
edit: the pcie splitter was my problem, prolly only runs gen 1
havent tried ZM 0 yet dont really need to
but all my 4GB rigs are running 4080 ZM 2
what's new in 1.18a? this just came out?
Another epoch, another drop.. I'm averaging 1.85mh drop per 570-580. each card as of today is at 22-23mh
In RaveOS the latest version does not work, when starting the miner the platform it restarts using version 1.18 and 1.18A (worker_rebooting_by_flag_auto) this happens in my two 4GB platforms, instead version 1.17 works perfectly in both.
Am I doing something wrong or is it a problem with the version included in RaveOs?
Am I doing something wrong or is it a problem with the version included in RaveOs?
im having the same symptom
i havent checked the other rigs cuz they all work with 4080 ZM 2
but the rig im having the same problems as u and cannot run at ZM 0
ZM 1 was low hashrate at first
but rebooting a few times then making sure the settings were right in logs got the desired outcome
im up 1-3 Mh per card across multiple rigs now
edit: im going to go make sure the pcie are all running gen 2
that rig is also running a pcie splitter which could be the problem
edit 2: yea maybe it doesnt work so much
the 4 "problem" cards (prolly the ones on the pcie splitter) dropped from 21Mh to 16Mh well under 1.17
If you don't have Gen2 the --zombie-tune 2 will not work and you should change 2 for 1 or 0.
The idea is to run miner-show, to see why it crash. Without that information is not possible to know where is the problem.
Best parameters with Gen2 are: --4g-alloc-size 4080 --zombie-tune 2
It could happen that GPU0, GPU2 can not run 4080, so it can be write it like:
--4g-alloc-size 4078,4080 ,4076,4080,... --zombie-tune 2
Choose each size for each card. And also same for --zombie-tune:
--4g-alloc-size 4078,4080 ,4076,4080,... --zombie-tune 0,2,1,0,2...
I hope that helps to have best optimisation.
2 is max optimisation
1 is medium optimisation
0 is like 1.17 with Watts improve
In RaveOS the latest version does not work, when starting the miner the platform it restarts using version 1.18 and 1.18A (worker_rebooting_by_flag_auto) this happens in my two 4GB platforms, instead version 1.17 works perfectly in both.
Am I doing something wrong or is it a problem with the version included in RaveOs?
Am I doing something wrong or is it a problem with the version included in RaveOs?
im having the same symptom
i havent checked the other rigs cuz they all work with 4080 ZM 2
but the rig im having the same problems as u and cannot run at ZM 0
ZM 1 was low hashrate at first
but rebooting a few times then making sure the settings were right in logs got the desired outcome
im up 1-3 Mh per card across multiple rigs now
edit: im going to go make sure the pcie are all running gen 2
that rig is also running a pcie splitter which could be the problem
edit 2: yea maybe it doesnt work so much
the 4 "problem" cards (prolly the ones on the pcie splitter) dropped from 21Mh to 16Mh well under 1.17
Can someone please post a full Linux command line configuration, how to get a maximum ETH hashrate from RX580 4GB cards?
Windows have lot less Memory free... have you got an Intel CPU to use his integrated GPU to leave more space to the 4Gb cards?
Yes, I use embedded GPU for my monitor. How should I leave more spaces for RX card?
Hey!
Run the last version on Windows 10. MSI RX480 4Gb shows 11.5Mhs with ETH. Is it Ok? I counted on 20 Mhs.
Thanks in advance!
Run the last version on Windows 10. MSI RX480 4Gb shows 11.5Mhs with ETH. Is it Ok? I counted on 20 Mhs.
Thanks in advance!
Windows have lot less Memory free... have you got an Intel CPU to use his integrated GPU to leave more space to the 4Gb cards?
Jump to: