lolMiner 1.64: Fastest Kaspa miner in market - page 62.

jgonzi

member

Activity: 639

Merit: 19

Quote from: Set Ready Go on December 26, 2020, 10:22:39 AM

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

Perhaps its my radeon driver version?
Its 20.2.2 version .

Although i read that blockchain drivers and newer should work.
Also i have compute mode enabled in wattman.

I suppose you want to say 7-8Mhs... Raven you cannot mine yet with lolMiner... 7-8Mhs with Raven is normal. With Etchash with a 560 16-18Mhs depending config. You can update to last drivers. It is always great

Set Ready Go

member

Activity: 273

Merit: 17

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

Perhaps its my radeon driver version?
Its 20.2.2 version .

Although i read that blockchain drivers and newer should work.
Also i have compute mode enabled in wattman.

jgonzi

member

Activity: 639

Merit: 19

Quote from: Set Ready Go on December 25, 2020, 07:16:08 PM

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

ETC gives me 21mh/s , card is not flashed for higher hashrate its original. with claymores with the straps i belive they did 25mh/s back in the day.
raven currently getting around 12mh/s .

Hmm yeah my beam hashrate seems very low also i can say it seems unstable if i for example pop xmrig for the cpu it can drop to 2sol/s .

System is TR1920x , 16 gb ram and windows 10 os.

That's normal today if you are in ETH with a 4Gb Cards...And next epoch change the 29th December it will go slower. Each EPOCH change will reduce 4Gb Cards because they are over their limit memory with the actual DAG Size

Set Ready Go

member

Activity: 273

Merit: 17

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

ETC gives me 21mh/s , card is not flashed for higher hashrate its original. with claymores with the straps i belive they did 25mh/s back in the day.
raven currently getting around 12mh/s .

Hmm yeah my beam hashrate seems very low also i can say it seems unstable if i for example pop xmrig for the cpu it can drop to 2sol/s .

System is TR1920x , 16 gb ram and windows 10 os.

jgonzi

member

Activity: 639

Merit: 19

Quote from: EthosRIG on December 25, 2020, 01:44:42 PM

Hi guys, I do have a rig with 6 cards, 3 with 8GB memory and 3 with 4GB memory. Now that ETH is ways more profitable compared to other coins I was thinking about dual mine.

ETH with the 8GB cards and BEAM or other ethash coins with the 4GB cards. Can lolminer do it? I can't find anything about.

Now I am mining ETH with all cards but the 4GB ones are in zombie mode because of the DAG size and they loose around 2mhs every epoch change...

Thanks in advance for the help.

You should run 2 instances, with the --devices parameter

EthosRIG

newbie

Activity: 29

Merit: 0

Hi guys, I do have a rig with 6 cards, 3 with 8GB memory and 3 with 4GB memory. Now that ETH is ways more profitable compared to other coins I was thinking about dual mine.

ETH with the 8GB cards and BEAM or other ethash coins with the 4GB cards. Can lolminer do it? I can't find anything about.

Now I am mining ETH with all cards but the 4GB ones are in zombie mode because of the DAG size and they loose around 2mhs every epoch change...

Thanks in advance for the help.

jgonzi

member

Activity: 639

Merit: 19

Quote from: miner29 on December 23, 2020, 03:11:21 PM

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

That seems correct for 550/560 series card vs 470/570 card. About 1/2 the Eth hash and about 1/2 the sols.

Yes, I think the bottleneck is the bus...

miner29

full member

Activity: 1275

Merit: 141

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

That seems correct for 550/560 series card vs 470/570 card. About 1/2 the Eth hash and about 1/2 the sols.

jgonzi

member

Activity: 639

Merit: 19

Quote from: sxemini on December 23, 2020, 12:30:37 PM

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

The rx560 is a slow card for mining. Also is in Zombie mode. It is better to use other ethash algo with it (ETC, Ella, ETHO, ...)

sxemini

member

Activity: 1558

Merit: 69

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Yes something is wrong. I get 7 - 8 sols with a RX560 (1200 gpu / 2100 mem) and around 16 sols with a RX470 4GB (1150 gpu / 2050 mem). What hashrates you have on ETC and Raven?

miner29

full member

Activity: 1275

Merit: 141

my 5700xt are

core 1350
mem 920
vlt 800

gets 53+mhs ~ 105 watts

no mods to bios

jgonzi

member

Activity: 639

Merit: 19

Quote from: Cryptomining2003 on December 23, 2020, 06:47:04 AM

Quote from: jgonzi on December 21, 2020, 12:32:15 PM

Quote from: Cryptomining2003 on December 21, 2020, 04:05:05 AM

Quote from: jgonzi on December 20, 2020, 03:54:43 PM

Quote from: Cryptomining2003 on December 20, 2020, 03:48:31 PM

Quote from: jgonzi on December 19, 2020, 05:58:52 AM

Quote from: Cryptomining2003 on December 19, 2020, 04:38:22 AM

the whole operating system freezed....so no log Sad

normally when a card freezes hiveos shows which card and reboots automatically...but not when all is stuck. how can the miner freeze the whole system?

you can try to enter in console, be sure you have log-on activaded if not write "log-on" and reboot. If another time happens... you will have a log in /var/log/miners/lolminer/... it will be really easy to see where it could be the problem.

Here´s the end of the log file after around 2 hours of mining. logging stopped hard as the operation system freezed. can you read anything out of it? I really would like to use lolminer as it saves lots of energy....

In the photo I see a go down Mhs in Gpu0 and Gpu 2 before the crash...
Which is your OC? To see if I can help on it... to discard problems.

It will be useful memory and OC. I think the 4 cards are 5700

There´s 3 cards which drop mhash....after 2 hours of stable mining simultanously 3 cards crash due to overclocking within 10 seconds? cant believe that it´s my overclocking settings.

It can happen when 1 card crash block by the read of temperatures... so the important is to see which makes the crash before. Which drivers are you using?. That will also help developer...

OS version0.6-184@201222
A OpenCL 20.30
N 440.100

What I dont understand...when my cards crash with other miners....system is still running with 0 mhash at the card that crashed...so my watchdog can restart. In this case the Hiveos completely crashed and I need to pull the plug out of the wall.
So which overclocking setting could cause that crash? I run fine with phoenix e.g. so I dont know what value to reduce or increase? here´s my clock settings:

GPU 0
03:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.73 MH
46°
72°
38%
72 W
1345
765/750/1275
900
GPU 1
08:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.98 MH
37°
78°
48%
64 W
1350
750/750/1250
900
GPU 2
0b:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.39 MH
50°
78°
43%
71 W
1345
755/760/1300
900
GPU 3
0e:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.73 MH
38°
78°
55%
64 W
1355
745/750/1250
900

GPU 1 and GPU3 have memory very very low. I recommend you change 1250 to 1275 -1300. With 1250 or 1260 some cards have the same problem you have.

Cryptomining2003

newbie

Activity: 64

Merit: 0

Quote from: jgonzi on December 21, 2020, 12:32:15 PM

Quote from: Cryptomining2003 on December 21, 2020, 04:05:05 AM

Quote from: jgonzi on December 20, 2020, 03:54:43 PM

Quote from: Cryptomining2003 on December 20, 2020, 03:48:31 PM

Quote from: jgonzi on December 19, 2020, 05:58:52 AM

Quote from: Cryptomining2003 on December 19, 2020, 04:38:22 AM

the whole operating system freezed....so no log Sad

normally when a card freezes hiveos shows which card and reboots automatically...but not when all is stuck. how can the miner freeze the whole system?

you can try to enter in console, be sure you have log-on activaded if not write "log-on" and reboot. If another time happens... you will have a log in /var/log/miners/lolminer/... it will be really easy to see where it could be the problem.

Here´s the end of the log file after around 2 hours of mining. logging stopped hard as the operation system freezed. can you read anything out of it? I really would like to use lolminer as it saves lots of energy....

https://imgur.com/a/AyP2qRN

In the photo I see a go down Mhs in Gpu0 and Gpu 2 before the crash...
Which is your OC? To see if I can help on it... to discard problems.

It will be useful memory and OC. I think the 4 cards are 5700

There´s 3 cards which drop mhash....after 2 hours of stable mining simultanously 3 cards crash due to overclocking within 10 seconds? cant believe that it´s my overclocking settings.

It can happen when 1 card crash block by the read of temperatures... so the important is to see which makes the crash before. Which drivers are you using?. That will also help developer...

OS version0.6-184@201222
A OpenCL 20.30
N 440.100

What I dont understand...when my cards crash with other miners....system is still running with 0 mhash at the card that crashed...so my watchdog can restart. In this case the Hiveos completely crashed and I need to pull the plug out of the wall.
So which overclocking setting could cause that crash? I run fine with phoenix e.g. so I dont know what value to reduce or increase? here´s my clock settings:

GPU 0
03:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.73 MH
46°
72°
38%
72 W
1345
765/750/1275
900
GPU 1
08:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.98 MH
37°
78°
48%
64 W
1350
750/750/1250
900
GPU 2
0b:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.39 MH
50°
78°
43%
71 W
1345
755/760/1300
900
GPU 3
0e:00.0
Radeon RX 5700 8176 MB · ASUS
Micron GDDR6 · 115-D199PI0-100
55.73 MH
38°
78°
55%
64 W
1355
745/750/1250
900

jgonzi

member

Activity: 639

Merit: 19

Quote from: Set Ready Go on December 22, 2020, 10:38:48 AM

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Normally is not a problem to mine other algos with the straps modified.

Set Ready Go

member

Activity: 273

Merit: 17

I dont think its flashed, hard to remember which ones i flashed and not. Anyhow these sapphire cards have dual bios so i tried to switch but results seems to be the same around 7 sols .

Ravencoin and ETC seems to work just fine at standard hashrates hence why i was abit thoughtful about the beam hashrate i was getting.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: miner29 on December 22, 2020, 09:29:20 AM

Wonder if he flashed his bios for eth and not helping for beam.

Yeah, I have no idea about optimal values for beam. Does anybody know? Whattomine says 1050 core and 1870 memory.

miner29

full member

Activity: 1275

Merit: 141

Quote from: Metroid on December 22, 2020, 08:30:53 AM

Quote from: Set Ready Go on December 22, 2020, 08:17:14 AM

Hey!
Trying out Beam on a rx 470 4gb, running undervolted and 1050 core 1750 mem getting around 7.5sol/s around what is normal ?

No, on whattomine a rx 470 should do 13.5 s/s. There must be something wrong somewhere.

Wonder if he flashed his bios for eth and not helping for beam.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: Set Ready Go on December 22, 2020, 08:17:14 AM

Hey!
Trying out Beam on a rx 470 4gb, running undervolted and 1050 core 1750 mem getting around 7.5sol/s around what is normal ?

No, on whattomine a rx 470 should do 13.5 s/s. There must be something wrong somewhere.

Set Ready Go

member

Activity: 273

Merit: 17

Hey!
Trying out Beam on a rx 470 4gb, running undervolted and 1050 core 1750 mem getting around 7.5sol/s around what is normal ?

Telker

newbie

Activity: 4

Merit: 0

Quote from: jgonzi on December 21, 2020, 03:09:49 AM

Quote from: Telker on December 20, 2020, 04:40:02 PM

Quote from: batsonxl on December 20, 2020, 09:36:53 AM

Quote from: jgonzi on December 20, 2020, 08:07:25 AM

Quote from: Telker on December 20, 2020, 07:30:28 AM

Quote from: jgonzi on December 20, 2020, 07:21:14 AM

Quote from: Telker on December 20, 2020, 07:11:24 AM

my lolminer stops mining on this screen, I have to close it and open it manually to return to normal, and the cycle is repeated ...
Can someone help me?

https://ibb.co/093wCfC

That's a driver crash. I do the following in you bat file

:loop
Lolminer lane as you have now
goto loop

This will auto restart

would my command line look like this?

lolMiner.exe --coin BEAM --pool beam-us.leafpool.com:3333 --user 2ebaa3bd8b37f6022eb787fb5e9c671752faa1700687eb333e7b4f29e329c73d882.telker
loop

Change it too:
:loop

lolMiner.exe --coin BEAM --pool beam-us.leafpool.com:3333 --user 2ebaa3bd8b37f6022eb787fb5e9c671752faa1700687eb333e7b4f29e329c73d882.telker

goto loop

thanks for help. Driver crash? what can be done to fix this? 1.15 works ok no crash.

https://ibb.co/TL46zny

with this command line the program closed on its own after 3 hours

Your fault is that you put :loop after the lolminer command, and you don't have put the "goto loop" you should put it like this:

:loop
lolminer ....... (all the actual arguments you have now)
goto loop

thanks for the help, finally i managed to continue mining for a long time, i noticed that for about 10 hours the program restarted 8 times, is it possible to correct this error?

https://ibb.co/0yJ9dBy

another question, how to extract the maximum potential of my AMD RADEON RX 5600 XT video card for mining? this is her model

https://www.gigabyte.com/Graphics-Card/GV-R56XTWF2OC-6GD/sp#sp

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 62. (Read 155842 times)