Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 74. (Read 155842 times)

Yes ... Linux kernel 5.6 forces slow mode ... but on the other hand will work behind epoch 385.
Note that slow mode only means a bit slower (1-2 sec) DAG generation. Mining speed will be (almost) normal. Almost, cause it runs a bit more complicated kernel to fix the kernel 5.6 issues....


By the way I got a lot of requests about Conflux recently and wanted to say something about this algorithm and why we won't see it too soon.
The algorithm requires to evaluate 32 polynomials of degree 1k for every hash before even starting the Ethash similar stuff.
Now that is something that is compute heavy, obviously, but wanted to point out how intense this is. Consider I found a way to do each step in 10 ops (which is already veeeery good) and have a RX 580 with 2304 shaders clocked 1200 mhz.
Then you see the card can do
2304 (cores) * 1200 * 1000000 (mhz) = 2.764.800.000.000 alu operations per second
Each hash needs
32*1024*10 = 327.680 of this

As a result the maximum speed of this 580 would be 8.43 MH/s
- and this is without other components of the algorithm - so more realistically its 4-5 MH/s


Ofc you might ask why then a 1660 is doing 15 MH/s+ .... well Nvidia Turing and Ampere cards have
- Tensor cores on the higher tier cards
- allow to run one integer and one floating point operation in parallel for all cards.

The algorithm is almost written like a showcase for this - one can pack the instructions almost perfectly, so a Turing and newer card will do two ops per cycle and achieves double the speed on this bottleneck.
That is why Turing & Ampere cards are so much faster then Nvidia Pascal and all AMD GPUs - and that is why its almost not worth spending a lot of time doing it for AMD since this algorithm will be dominated by newer Nvidia cards.
As a conclustion:

Try with --disableLinux56fix  if that helps...

In RaveOS, the lolminer 1.15 starts in slow mode, all my cards are AMD 8gb, is there any way to change this?

It really depend on how much you want to push it or how many watts do you want to safe and of course always the silicion lottery... I for example prefer low Watts and I'm in 54Mhs... if I push the memory and the clock I get 57-58Mhs... but watts goes up. So I prefer not to force the gpu and have them like rock solid... at the end is your decision.

I found it. Thnx.

there are many video about RX 5700 XT hashrate.
Anyone share hiveos screenshot about hashrate of lolminer ?
i am still trying to decide which miner i will use.
i have to stop using Phoneix. there two option: lol or teamred

Yes it is... you only need to active the Watchdog in Hiveos ... tell the Mhs and you will have also all the information by Telegram... and it will make a reboot directly from HiveOS which is better always.

is there watchdog for HiveOS ?
TeamRedMiner & PhoenixMiner tells rebooting if anything goes wrong and i can see in telegram push notification. When lolMiner stops and no any notification.
I want to see notification if anything goes wrong and miner stop

Well you have to think Phoenixminer/Claymore Hashrate are inflated for a nearly 3%. It is well know at there are some reviews about it. Also if you count the invalid shares that will more difference... Also lolMiner don't recreate DAG when making the fee that reduces the overall time of fee. At the end you are paid by the pool for the valid shares...

I have 15 GH eth mining hashrate. I use Phoenixminer but it gives many incorrect shares only on navi gpus last two days. There was any problem before. I m looking for a different miner. I m trying lolMiner with RX 5700 XT GPUs. I realized lolMiner gives lower hashrate with same settings. What should i do ?

Good job... Sometimes different miners need more Voltage... or less Memory.  It is great to see you have it running... Enjoy it

Why you don't try to run 2 instances?. The problem seems to be in R9 380. Which version are you trying?

Slightly lowered the core frequency, slightly raised the memory voltage on all GPU and the oddities stopped.

Uptime: 3h 22m 35s
                              GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           24.56    24.57    23.89    23.46    22.41    24.57    24.58    168.03
Pool (mh/s):              21.20    22.97    22.97    27.21    25.44    22.61    21.55    163.95
Best Share:            295.4G   182.8G  133.3G  168.9G   222.4G  677.4G   7.3T      7.3T
Shares (A/S/Hw):    60/0/0   65/0/0   65/0/0   77/0/0   72/0/0   64/0/0   61/0/0   464/0/0
Power (W):                   n.a.     n.a.     n.a.     n.a.     n.a.     n.a.     n.a.
Efficiency (mh/s/W):     n.a.     n.a.     n.a.     n.a.     n.a.     n.a.     n.a.      n.a.
Temps (deg C):             62       67       58       66       61       59       63
Fan Speed (%):             93       98       73       90       74       90       93
---------------------------------------------

Thanks for the help!

i need help with this lolminer, i cant get good speeds.
rx480=25mhs, rx570=19mhs. 1150/2070 900/920mv, win10,compute mode is on.20.4.2 driver
Is there anyway get good speed with lolminer WITHOUT modding the bios? thanks good folks

hello I have this problem it does not let me mine combining amd and nvida I have the drivers amd 18.12.3 and nvidea 382.05


Setup Miner...
 Device 0:
    Name:    Radeon (TM) RX 470 Graphics
    Address: 1:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  4096 MByte (4042 MByte free)
    Max epoch (approx): 376
    Active:  true (Selected Algorithm: ETHash)
 Device 1:
    Name:    GeForce GTX 1070
    Address: 2:0
    Vendor:  NVIDIA Corporation
    Memory:  8192 MByte
    Max epoch (approx): 894
    Active:  true (Selected Algorithm: ETHash)
 Device 2:
    Name:    Radeon RX 570 Series
    Address: 7:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  4096 MByte (4042 MByte free)
    Max epoch (approx): 376
    Active:  true (Selected Algorithm: ETHash)
 Device 3:
    Name:    AMD Radeon (TM) R9 390 Series
    Address: 8:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  8192 MByte (8141 MByte free)
    Max epoch (approx): 894
    Active:  true (Selected Algorithm: ETHash)
 Device 4:
    Name:    AMD Radeon (TM) R9 380 Series
    Address: 9:0
    Vendor:  Advanced Micro Devices (AMD)
    Memory:  4096 MByte (4042 MByte free)
Problem in building kernel

i found answer  

https://imgur.com/y15A9AT

thanks for help

ithink i found :

/root/hive/miners/lolminer/1.12/lolminer.conf

--algo ETHASH                                                                                                                                                                                                                             
--pool pool.ahmetkaldirim.com:9001                                                                                                                                                                                                       
--user 0x38ddf965ca514a885a3debd1f529b1375f4f081d.Ruyam_04                                                                                                                                                                               
--pass Ruyam_04                                                                                                                                                                                                                           
--apiport 44444                                                                                                                                                                                                                           
--timeprint 1 --shortstats 10 --longstats 60

parameter included in this file but how to i use is 44444 port

i was watch claymore 3333 port miner screen or 3rd party application to rig live check like as claymore monitör.

Actually i try this but it give error :

option '--apiport' cannot be specified more than once                                                                                                                                                                                    

lolminer exited, waiting to cooldown a bit

https://imgur.com/W2Tb11G

please help this...

You can specify the port with the --apiport command in the bat-file or APIPORT in the config (for example, --apiport 3333). By default, no value is assigned to it. You can specify any port, the main thing that it was opened in HiveOS.

Hi,
How I watch lolminer api my other computers or on 3rd party application
what is default api port?
or how i setup api parameters on lolminer.

I use hiveos lolminer 1.15

eg: claymore 3333

thanks

It is strange... if the Dag is not created...