lolMiner 1.64: Fastest Kaspa miner in market - page 75.

jgonzi

member

Activity: 639

Merit: 19

Quote from: satcomcom on November 15, 2020, 06:20:51 PM

Quote from: jgonzi on November 15, 2020, 06:02:54 PM

Have you try to increase voltage to theses 2 cards? In the log the DAG seems to be not created. Only to discard...

All GPU fully functional, tested in various configurations with ethminer, I tried replacing some GPU with R9 390 8GB, same result, only 5 GPUs working

It is usefull to see if they are always the same cards that are 0... or if you swap the pci riser to be 0Mhs another position if that 0 goes to that card or stills in the same position... That will let more information.

DaCryptokeeper

newbie

Activity: 5

Merit: 0

I am trying to mine beam with lolminer.(1.15, have also tried 1.11) Using 5 amd rx 470 4gb cards. Doesn't matter if I use stock or under/overclocked settings, new drivers, etc-GPU 1 mines at less than 1 sol and causes the miner to invoke the stuck miner emergency protocol. IT's only the first gpu, doesn't matter what settings I use, it just dies. Any ideas, or is there a way, using the bat file to just mine on the one card to see, or to just disable that card and mine with 4. Those same cards mine Ethash coins fine(on phoenixminer)?

satcomcom

sr. member

Activity: 1204

Merit: 295

Quote from: jgonzi on November 15, 2020, 06:02:54 PM

Have you try to increase voltage to theses 2 cards? In the log the DAG seems to be not created. Only to discard...

All GPU fully functional, tested in various configurations with ethminer, I tried replacing some GPU with R9 390 8GB, same result, only 5 GPUs working

jgonzi

member

Activity: 639

Merit: 19

Quote from: satcomcom on November 15, 2020, 09:55:57 AM

Quote from: bassistas on November 14, 2020, 03:11:11 PM

Hi guys, I have some r9 290 4GB, some rx 580 4gb gpus and yesterday they stopped mining eth so I decided to give lolminer zombie mode a try. I managed to make it work but the hashrates are very low. The r9 290's previously were mining at 29-30mh/s and now at 19-20mh/s, also the rx580's is mining at 22mh/s . Is there any specific parameter I have to change to raise more the mh/s?

I checked:
Ubuntu 16.04.6
lolMiner 1.14
R9 290 core 1040 memory 1300
24.5 MH (30.5 MH before with etminer)
sudo ./lolMiner --algo ETHASH --pool eu1.ethermine.org:4444 --user ADDRESS.RIG_NAME --4g-alloc-size 4076

But ... no more than 5 GPU work.

Have you try to increase voltage to theses 2 cards? In the log the DAG seems to be not created. Only to discard...

hazethegreat

newbie

Activity: 2

Merit: 0

Quote from: jgonzi on November 14, 2020, 02:46:50 AM

Which version of lolminer are you using?

The version 1.14 has introduced the
Ethash Zombie mode for 4G Nvidia GPUs. You have to use --4g-alloc-size to calibrate the number of MBytes the GPUs are allowed to use.
The version 1.15 : (You can downloaded directly from github)
Improved Ethash efficiency on Nvidia GPUs
General stability improvements (resolved many potential miner hangs up causes)

I was using 1.14 and now I've tried 1.15 with the same results. As stated it successfully enters into Zombie mode (but still produces 0.00MH/s).

Thanks

satcomcom

sr. member

Activity: 1204

Merit: 295

Quote from: bassistas on November 14, 2020, 03:11:11 PM

Hi guys, I have some r9 290 4GB, some rx 580 4gb gpus and yesterday they stopped mining eth so I decided to give lolminer zombie mode a try. I managed to make it work but the hashrates are very low. The r9 290's previously were mining at 29-30mh/s and now at 19-20mh/s, also the rx580's is mining at 22mh/s . Is there any specific parameter I have to change to raise more the mh/s?

I checked:
Ubuntu 16.04.6
lolMiner 1.14
R9 290 core 1040 memory 1300
24.5 MH (30.5 MH before with etminer)
sudo ./lolMiner --algo ETHASH --pool eu1.ethermine.org:4444 --user ADDRESS.RIG_NAME --4g-alloc-size 4076

But ... no more than 5 GPU work.

bassistas

newbie

Activity: 32

Merit: 0

Quote from: ivomm on November 14, 2020, 07:22:19 PM

Quote from: bassistas on November 14, 2020, 03:11:11 PM

Hi guys, I have some r9 290 4GB, some rx 580 4gb gpus and yesterday they stopped mining eth so I decided to give lolminer zombie mode a try. I managed to make it work but the hashrates are very low. The r9 290's previously were mining at 29-30mh/s and now at 19-20mh/s, also the rx580's is mining at 22mh/s . Is there any specific parameter I have to change to raise more the mh/s?
thanks

Strange, I thought lolminer doesn't recognize hawaii at all for eth. At least on SMOS it doesn't recognize my cards. Or may be it needs some change in the files of the SMOS?

I use HiveOS and I was mining without any problems with all my hawaii GPUs, maybe SMOS doesn't have the same drivers installed that's why they don't get detected there but the strange thing is why the RX 580 mining at a different speed than the Hawaii GPUs now in zombie mode. they have the same amount of memory and they were mining at 30-32mh/s with some OC, both the hawaii (r9 290) and the rx 580. Now with the zombie mode, the RX 580 4GB is ahead in mining.

ivomm

legendary

Activity: 1891

Merit: 3096

All good things to those who wait

Quote from: bassistas on November 14, 2020, 03:11:11 PM

Hi guys, I have some r9 290 4GB, some rx 580 4gb gpus and yesterday they stopped mining eth so I decided to give lolminer zombie mode a try. I managed to make it work but the hashrates are very low. The r9 290's previously were mining at 29-30mh/s and now at 19-20mh/s, also the rx580's is mining at 22mh/s . Is there any specific parameter I have to change to raise more the mh/s?
thanks

Strange, I thought lolminer doesn't recognize hawaii at all for eth. At least on SMOS it doesn't recognize my cards. Or may be it needs some change in the files of the SMOS?

jgonzi

member

Activity: 639

Merit: 19

Quote from: bassistas on November 14, 2020, 03:11:11 PM

Hi guys, I have some r9 290 4GB, some rx 580 4gb gpus and yesterday they stopped mining eth so I decided to give lolminer zombie mode a try. I managed to make it work but the hashrates are very low. The r9 290's previously were mining at 29-30mh/s and now at 19-20mh/s, also the rx580's is mining at 22mh/s . Is there any specific parameter I have to change to raise more the mh/s?
thanks

The most profit option is to try to mine at the moment ETH now until the DAG of ETC fork... that will let you mine now with more hashrate... you will be able also to mine with lolMiner in the fork of ETC...

bassistas

newbie

Activity: 32

Merit: 0

Hi guys, I have some r9 290 4GB, some rx 580 4gb gpus and yesterday they stopped mining eth so I decided to give lolminer zombie mode a try. I managed to make it work but the hashrates are very low. The r9 290's previously were mining at 29-30mh/s and now at 19-20mh/s, also the rx580's is mining at 22mh/s . Is there any specific parameter I have to change to raise more the mh/s?
thanks

jgonzi

member

Activity: 639

Merit: 19

Quote from: hazethegreat on November 13, 2020, 09:48:01 AM

Hey guys,
OS: Ubuntu 20.04
GPU: GTX 1050Ti
Drivers: Nvidia 450.80.02 CUDA 11.0

I have lolMiner 1.14 successfully loading DAG in Zombie mode and continually receiving new jobs from the pool eth2.2miners.com:2020
The problem is the hashrate remains 0.00 mh/s at all times, even though the GPU usage is 100% as reported by nvidia-smi.
Any tips? Sorry if its something obvious, I haven't done linux mining before.

Thanks

Which version of lolminer are you using?

The version 1.14 has introduced the
Ethash Zombie mode for 4G Nvidia GPUs. You have to use --4g-alloc-size to calibrate the number of MBytes the GPUs are allowed to use.
The version 1.15 : (You can downloaded directly from github)
Improved Ethash efficiency on Nvidia GPUs
General stability improvements (resolved many potential miner hangs up causes)

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: delfinas on November 13, 2020, 08:36:32 AM

Is there a way to enforce slow mode DAG creation?
With the update to 1.14, 13 x 570 4GB rig would produce defect shares on GPUs 0 through to 5. I noticed that the fast DAG generation mode was used on the 0-5 GPUs and slow mode on 6-12. I was able to resolve the invalid share issue by reverting to 1.12 which uses slow mode on all GPUs.

Thanks

Just fixed with 1.15 Cheesy

hazethegreat

newbie

Activity: 2

Merit: 0

Hey guys,
OS: Ubuntu 20.04
GPU: GTX 1050Ti
Drivers: Nvidia 450.80.02 CUDA 11.0

I have lolMiner 1.14 successfully loading DAG in Zombie mode and continually receiving new jobs from the pool eth2.2miners.com:2020
The problem is the hashrate remains 0.00 mh/s at all times, even though the GPU usage is 100% as reported by nvidia-smi.
Any tips? Sorry if its something obvious, I haven't done linux mining before.

Thanks

delfinas

newbie

Activity: 2

Merit: 0

Is there a way to enforce slow mode DAG creation?
With the update to 1.14, 13 x 570 4GB rig would produce defect shares on GPUs 0 through to 5. I noticed that the fast DAG generation mode was used on the 0-5 GPUs and slow mode on 6-12. I was able to resolve the invalid share issue by reverting to 1.12 which uses slow mode on all GPUs.

Thanks

7anonminer7

newbie

Activity: 15

Merit: 0

Is there an option for miner restart when hashrate drops and/or one or more of the cards in the rig hashrate drops to 0? I've encountered this issue for a few times now and this didn't happen with other miners :/

PS. I'm on Windows 10, with Polaris 3x570 4GB and 1x470 4GB and I'm not using "--4g-alloc-size". I've just now edited my cfg to use "--4g-alloc-size 4024" - maybe it will help.

jgonzi

member

Activity: 639

Merit: 19

Quote from: DooGZ on November 12, 2020, 05:49:25 PM

anyone using lolMiner in HiveOS using HiveOn pool with 4gb AMD GPU? can you kindly share your miner parameters?

Try adding this parameter to the extra commands.

--4g-alloc-size 4076

The other parameter are the normal %URL% %WALLET% ...

dillony

newbie

Activity: 107

Merit: 0

anyone can share mining parameters on nvidia 4gb on hiveos?

DooGZ

newbie

Activity: 12

Merit: 0

anyone using lolMiner in HiveOS using HiveOn pool with 4gb AMD GPU? can you kindly share your miner parameters?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Lolliedieb on November 12, 2020, 09:39:40 AM

Quote from: UnclWish on November 11, 2020, 02:17:56 PM

Where is 1.13 for Windows? On github only for linux...

Sry, I was not that quick xD
Now we are even at 1.14 ... had some issues with Nvidia rigs ... but well thats fixed and some Nvidia candy added Wink

Power consumption on Polarises with 1.14 is good! It's very close to PM miner now. Maybe the same. Speed is the same as was in previous versions... About 1.7% slower than PM.

Another question:
RX 580-8 rig. On 1st card of rig. When monitor connected and trying to look video on youtube or play any videofile (even in bad quality f.e. 320p) video playback goes with freezes. On all other miners (Claymore, TR, PM) video plays without problems during eth mining.

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: UnclWish on November 11, 2020, 02:17:56 PM

Where is 1.13 for Windows? On github only for linux...

Sry, I was not that quick xD
Now we are even at 1.14 ... had some issues with Nvidia rigs ... but well thats fixed and some Nvidia candy added Wink

Quote from: jgonzi on November 11, 2020, 12:02:30 PM

Are you trying to mine ETC?... why you don'tr try to put the 1st GPU with the Vega?. That Will make the 1st GPU with 8 Gb. Can you try for example a Coin with less DAG?

I need to say I got no idea, why the user had the issue with the other cards not listed. But having a 8G in slot 1 does not help in lolMiner, each card is on its own with this.

Topic: lolMiner 1.64: Fastest Kaspa miner in market - page 75. (Read 155842 times)