hello, I am new, I have just acquired: mars lander (bitcoin merch) with 3 gekko science key (BM 1397)
I should provide between 925 and 960 GH/s.
I will have a question, as I participate if there is a gain (I would see it on the PI zero Wh which manages the mining software has an oled)
how I would be paid, because the mining address is that of our team (I have a personal BTC address). Thank you for your answers .
Topic: Lottery Solo Pool Miner Race on ckpool - page 12. (Read 8544 times)
Good day! I would like to join the pool 
I just setup my device and so don't have 7 days in CKpool yet, but I understand the payout rules. I've pointed my miner at the address as of today!
Username: Teraz08_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 400 GH/s
Welcome on our small pool.I just setup my device and so don't have 7 days in CKpool yet, but I understand the payout rules. I've pointed my miner at the address as of today!
Username: Teraz08_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 400 GH/s
Cross our fingers to find a block.
With the statistic link you can see your and all the other miner and also have a look to the 7day rule.
https://solorun.lima.zone/ (simple overview)
Best regards,
Willi
Good day! I would like to join the pool
I just setup my device and so don't have 7 days in CKpool yet, but I understand the payout rules. I've pointed my miner at the address as of today!
Username: Teraz08_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 400 GH/s
I just setup my device and so don't have 7 days in CKpool yet, but I understand the payout rules. I've pointed my miner at the address as of today!
Username: Teraz08_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 400 GH/s
There is a new firmware for the small Bitaxe
v2.0.7 Latest
Power management will now use the board version to distinguish capabilities
New Stratum password field
Version rolling now properly configured by stratum server
I have updated the list of miners and added a few pictures I got from one or the other miner here in the topic.
Happy Mining
Willi
v2.0.7 Latest
Power management will now use the board version to distinguish capabilities
New Stratum password field
Version rolling now properly configured by stratum server
I have updated the list of miners and added a few pictures I got from one or the other miner here in the topic.
Happy Mining
Willi
Hey Willi, here are two pics of my setup. The S9's were old and the previous person who owned them ran them hot and didn't clean them, they were so dirty when i got them, I had to task them all apart, and the control boards won't work with more than 1 hashboard connected so as you see on the left i had to use 3 control boards to control each hashboard. But having them in one enclosure saves me on the number of fans being run (control board 2 and 3 are set up in immersion mode) and I just let one control board run the fan at 8% speed (that is enough). I also am using two modular 1000w power supplies that I had, that are completely silent. Both of these miners don't make hardly any sound, but produce a little bit of heat. They are only pulling about 680 watts at the wall.
https://i.postimg.cc/FHggZSmS/20240121-153149.jpg
https://i.postimg.cc/nhtGB28Z/20240121-153215.jpg
https://i.postimg.cc/FHggZSmS/20240121-153149.jpg
https://i.postimg.cc/nhtGB28Z/20240121-153215.jpg
Hello everyone!
I want too join too i just point my miner to solo ck pool
username : se7en6301
Miner : r909 gekko
Hash avg : 1.7 t or more
Good luck TO US !
I want too join too i just point my miner to solo ck pool
username : se7en6301
Miner : r909 gekko
Hash avg : 1.7 t or more
Good luck TO US !
Hello Willi, nice idea with the miner race!
I just configured my 4 NewPacs to mine to your willipool address:
Username: 100knot2dae
Device type: 4x NewPac
Normal speed: 352 GH/s
Welcome and cross our fingers for a big big bestshare to crack maybe a block in the future I just configured my 4 NewPacs to mine to your willipool address:
Username: 100knot2dae
Device type: 4x NewPac
Normal speed: 352 GH/s
Amazing how many miner come inter the small idea from me. It makes fun and if you have time, take photo and share it with us how your mining setup looks like. I love that Kinde of pics…
Best regards,
Willi
Hello everyone!
I want too join too i just point my miner to solo ck pool
username : se7en6301
Miner : r909 gekko
Hash avg : 1.7 t or more
Good luck TO US !
I want too join too i just point my miner to solo ck pool
username : se7en6301
Miner : r909 gekko
Hash avg : 1.7 t or more
Good luck TO US !
Hello Willi, nice idea with the miner race!
I just configured my 4 NewPacs to mine to your willipool address:
Username: 100knot2dae
Device type: 4x NewPac
Normal speed: 352 GH/s
I just configured my 4 NewPacs to mine to your willipool address:
Username: 100knot2dae
Device type: 4x NewPac
Normal speed: 352 GH/s
Thanks, maybe 2024 will be our lucky year! have you done any block parties lately?
UPDATE: here is the next Blockparty number 57 https://bitcointalksearch.org/topic/m.63523593
Best regards,
Willi
################
new Firmware Version
https://github.com/skot/ESP-Miner/releases
v2.0.6 Latest
What's Changed
revert the order of mining.configure and mining.subscribe by @skot in #81
Full Changelog: v2.0.5...v2.0.6
Known Issues
Some pools complain about the ordering of mining.configure and mining.subscribe but should still work. We are still investigating this issue in #80
Quelle: https://github.com/skot/ESP-Miner/releases
Best regards
Willi
Username: kkmonte_5
Device type: S9_custom
Normal speed: 1100 GH/s
i'll have one more, _6 coming at some point in the next week, then once the bitaxe shows up from china, that will be the end and my miners should be stable and just work away!
Thanks, have update the list.Device type: S9_custom
Normal speed: 1100 GH/s
i'll have one more, _6 coming at some point in the next week, then once the bitaxe shows up from china, that will be the end and my miners should be stable and just work away!
Did you user the s9 as a heater for your home?
Have sean that kind of heater some times, but the power cost in germany is terrable for that, cant do it.
Best regards from the cold germany
Willi
Hi Willi, you can update kkmonte_4, kkmonte_5, and kkmonte_6 to be S9 miners. They are running one hashboard so output 1.11 th/s. I did a bunch of power tests, playing with voltage and mhz of the board to determine the most efficient and cheapest miner for solo mining using my old s9's that I had. The past 4 winters, I used them to help heat my house, I had them set up around my basement (which is insulated and sealed well) and they made the basement 70 deg F in the winter, which then, the heat made its way up into the main floor. I ended up saving about 400 gallons of heating oil, which is about $1200-$1300 USD in oil, a small savings with using electric for miners but I was earning btc.
As you said, for this solo pool miner, it's best to use least amount of electricity, and sacrifice some hashrate since our odds are basically the same whether my miner is running at 1100 gh/s or 3300 gh/s, odds are more or less the same.
Thanks, maybe 2024 will be our lucky year! have you done any block parties lately?
PI1 is now down to a single Compac F (1 of the 2 is now showing 0 chips...)
P12 has 1 Compac F and 4 2PAC's (I had mislabeled them as new pacs)
P12 has 1 Compac F and 4 2PAC's (I had mislabeled them as new pacs)
If that is your goal 
than yes you can do that.
If you find a block, in the share time on our address we are all happy
And if you find a Block on your private address, than gratulation for your hack
Best regards and have fun and now welcome on my ignore list
Willi
than yes you can do that.If you find a block, in the share time on our address we are all happy
And if you find a Block on your private address, than gratulation for your hack
Best regards and have fun and now welcome on my ignore list
Willi
You can use all. Important is the result Statistik from the Solo Pool.
Best regards,
Willi
I ask this because of following:Best regards,
Willi
The setup is really interesting. When I read it, I instinctively optimised it in my mind. To get maximised result:
A miner should mine in your setup as long as to keep 7 day avarage higher than 200 GH/s. Anyone who higher than 200 GH/s for 7 days, basically gifting its hash power for others.
I would like to able to write a script that keeps my miner 201-202 GH/s 7 days average, and mine solo its own in other idle times.
Algorithm could work in one hour intervals.
Code:
10. Mine for shared for one hour.
20. Are you eligiable for reward? If yes goto 30, else goto 10.
30. Mine solo for one hour.
40. Goto 20.
You can use all. Important is the result Statistik from the Solo Pool.
Best regards,
Willi
Best regards,
Willi
In case of a block found
After a small survey, we have decided on the following distribution of rewards in the case of a block found.
- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table
Basic requirement for payment:
- the miner has been active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
And what happens if a recently joined worker (less than 7 days) finds a block? Is it still eligible to get 10% extra or not?After a small survey, we have decided on the following distribution of rewards in the case of a block found.
- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table
Basic requirement for payment:
- the miner has been active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
Thanks for the Question!
Update: i update the rules on page one, to make that clear.
Best regards,
Willi
Is it possible to use 1.4 TH/s device one day in a week or 33 TH/s device one hour in a week? This would make 7 days avg. as 200 GH/s.
In case of a block found
After a small survey, we have decided on the following distribution of rewards in the case of a block found.
- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table
Basic requirement for payment:
- the miner has been active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
And what happens if a recently joined worker (less than 7 days) finds a block? Is it still eligible to get 10% extra or not?After a small survey, we have decided on the following distribution of rewards in the case of a block found.
- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table
Basic requirement for payment:
- the miner has been active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
Thanks for the Question!
Update: i update the rules on page one, to make that clear.
Best regards,
Willi
In case of a block found
After a small survey, we have decided on the following distribution of rewards in the case of a block found.
- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table
Basic requirement for payment:
- the miner has been active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
And what happens if a recently joined worker (less than 7 days) finds a block? Is it still eligible to get 10% extra or not? After a small survey, we have decided on the following distribution of rewards in the case of a block found.
- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table
Basic requirement for payment:
- the miner has been active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
Username: kkmonte_5
Device type: S9_custom
Normal speed: 1100 GH/s
i'll have one more, _6 coming at some point in the next week, then once the bitaxe shows up from china, that will be the end and my miners should be stable and just work away!
Thanks, have update the list.Device type: S9_custom
Normal speed: 1100 GH/s
i'll have one more, _6 coming at some point in the next week, then once the bitaxe shows up from china, that will be the end and my miners should be stable and just work away!
Did you user the s9 as a heater for your home?
Have sean that kind of heater some times, but the power cost in germany is terrable for that, cant do it.
Best regards from the cold germany
Willi
Username: kkmonte_5
Device type: S9_custom
Normal speed: 1100 GH/s
i'll have one more, _6 coming at some point in the next week, then once the bitaxe shows up from china, that will be the end and my miners should be stable and just work away!
Device type: S9_custom
Normal speed: 1100 GH/s
i'll have one more, _6 coming at some point in the next week, then once the bitaxe shows up from china, that will be the end and my miners should be stable and just work away!
Hi Willi, Another Bitaxe Ultra to add to the party!
Username: yyuoosta
Device type: Bitaxe ULTRA 202
Normal speed: 425 GH/s
Cheers !
welcome and i will update the posting one withe thenew tableUsername: yyuoosta
Device type: Bitaxe ULTRA 202
Normal speed: 425 GH/s
Cheers !
| Place | | | User | | | Device Type | | | Speed 5 Min. | | | Number Shares | | | Best Share | | |
| ----- | | | ---------------------- | | | -------------------- | | | ---------------- | | | -------------- | | | ------------------- | | |
| #1 | | | brun0 | | | Bitaxe ULTRA 202 | | | 517 GH/s
Jump to:
|