Maybe it is good idea not to show 7d>200G rows in red font when even they are inactive as they are eligible. It would be easier to track reward eligibility.
Edit: Or maybe you could create another column that shows eligibility, it would provide better clarity.
on the status page you can see all, but only in german, sorry. But with the browser todays time you can translate with one or two clicks.
https://solorun.lima.zone/German: Anzahl der Worker für Payout mit Hashrate >= 200G in beiden Werten (5m und 7d)
Englisch: Number of workers for payout with hashrate >= 200G in both values (5m and 7d)
this is to prevent script children who temporarily redirect their miner to the pool via script in order to keep the hashrate artificially high with little effort.
if your miner is always online and has a technical problem for an hour during the blockfund, i will take this into account and you will be included in the payout. if i see that your miner is regularly offline, you are out.
Basic requirement for payment:
- the miner has been always active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
- If a miner finds a block but not over 200 GHs in 7 days, he still gets the 10% bonus
###########################
have update the table with the actual data.
| Place | | | User | | | Device Type | | | Speed 5 Min. | | | Number Shares | | | Best Share | | |
| ----- | | | ---------------------- | | | -------------------- | | | ---------------- | | | -------------- | | | ------------------- | | |
| #1 | | | brun0 | | | Bitaxe ULTRA BM1366 | | | 477 GH/s
newbie
Activity: 31
Merit: 0
Maybe it is good idea not to show 7d>200G rows in red font when even they are inactive as they are eligible. It would be easier to track reward eligibility. Edit: Or maybe you could create another column that shows eligibility, it would provide better clarity.
newbie
Activity: 31
Merit: 0
hello everyone, for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software) your gekko-compacf-freq 380. my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set. https://www.talkimg.com/images/2024/02/02/klp7D.jpeghttps://www.talkimg.com/images/2024/02/02/kllMw.jpegmy parameter on picture. on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z) the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V // for the max (350 gh/s you need 5 A per USB port) be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W) Thank you, I will experiment based on these. [Unit]
Description=runs cgminer
After=network-online.target
[Service]
Type=simple
Restart=always
ExecStart=/home/rpi4/cgminer/cgminer --syslog --real-quiet -o stratum+tcp://solo.ckpool.org:3333 -u bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.mustafatufan_1 -p x --gekko-compacf-freq 460 --gekko-mine2 --gekko-start-freq 320 --gekko-tune-up 85 --gekko-tune2 60
[Install]
WantedBy=multi-user.target Everything is same but with increased gekko-compacf-freq to 460, now it goes close to 300G, seems working. Thank you. I will try higher values after I make sure I have correct electrical setup.
newbie
Activity: 31
Merit: 0
hello everyone, for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software) your gekko-compacf-freq 380. my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set. https://www.talkimg.com/images/2024/02/02/klp7D.jpeghttps://www.talkimg.com/images/2024/02/02/kllMw.jpegmy parameter on picture. on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z) the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V // for the max (350 gh/s you need 5 A per USB port) be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W) Thank you, I will experiment based on these.
newbie
Activity: 11
Merit: 0
hello everyone, for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software) your gekko-compacf-freq 380. my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set. https://www.talkimg.com/images/2024/02/02/klp7D.jpeghttps://www.talkimg.com/images/2024/02/02/kllMw.jpegmy parameter on picture. on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z) the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V // for the max (350 gh/s you need 5 A per USB port) be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W)
legendary
Activity: 3654
Merit: 3003
Top-tier crypto casino and sportsbook
Welcome to the new members. Every miner who helps us to increase the chance of finding a block is welcome.
A few have come together now. Let's see how stable the community is and how many will still be around in a year or two.
Then keep your fingers crossed for the race for the best share and, above all, a block.
By the way, if someone like me or someone else has already done it, rents a Nicehash Rental and fires at the pool, nobody will mind...
Best regards
Willi
newbie
Activity: 31
Merit: 0
Any participant with single GekkoScience Compac F, can you share your cgminer parameters? Mine does not exceed 250G most of the time, I wonder if I do something wrong. systemd job i configured: [Unit]
Description=runs cgminer
After=network-online.target
[Service]
Type=simple
Restart=always
ExecStart=/home/rpi4/cgminer/cgminer --syslog --real-quiet -o stratum+tcp://solo.ckpool.org:3333 -u bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.mustafatufan_1 -p x --gekko-compacf-freq 380 --gekko-mine2 --gekko-start-freq 320 --gekko-tune-up 85 --gekko-tune2 60
[Install]
WantedBy=multi-user.target
newbie
Activity: 2
Merit: 1
Hello everyone, I'm joining the Bitaxe adventure on your pool. Username: tyrexwolf_1 Device type: Bitaxe ULTRA BM1366 Normal speed: 460 GH/s BTC address  : 35S3SiSQ2cBhQvTn23BXcUq1WhUq5JVnTk Happy mining 
newbie
Activity: 11
Merit: 0
Username: mustafatufan_1 (I want to add more miner, so added the number just in case.)
Device type: GekkoScience Compac F
Normal speed: 380Gh/s
Reward payment: 1MustaoR6XLZ1fE31XmK1mXnfqMSchAuBs (I am extremely lucky person, get ready for a block.)
Welcome mustafatufan yes cross our fingers and concrats you are the first one that post a reward return address  If we find really a block, than i ask all for a return address. hopefully in some days but let us stay realistic, than more in years or never... but let us hope and maybe we have luck... See you and fingers are crossed, Willi hello everyone, I post my BTC address (deposit): bc1qxxj4yq83s6gqsxscxvfmp5w6rzu9aqlt05hnwh. I think I'm the second to give it. I wish us good luck in finding a Block. I have a question: has a Block already been found by a miner?
newbie
Activity: 29
Merit: 4
hmm it disappeared from the main menu, but still shows up on the cksolo pool one. gotta be the way it handles over 1,000,000G... shows as inactive. but its still running!
newbie
Activity: 29
Merit: 4
thanks Willi for nicehash rental, I couldn't let you do that alone, so i just grabbed an MRR one with the leftover btc i had in my account. I like MRR better than nicehash lol. Should see it soon.
legendary
Activity: 3654
Merit: 3003
Top-tier crypto casino and sportsbook
Username: mustafatufan_1 (I want to add more miner, so added the number just in case.)
Device type: GekkoScience Compac F
Normal speed: 380Gh/s
Reward payment: 1MustaoR6XLZ1fE31XmK1mXnfqMSchAuBs (I am extremely lucky person, get ready for a block.)
Welcome mustafatufan yes cross our fingers and concrats you are the first one that post a reward return address If we find really a block, than i ask all for a return address. hopefully in some days but let us stay realistic, than more in years or never... but let us hope and maybe we have luck... See you and fingers are crossed, Willi
newbie
Activity: 31
Merit: 0
Username: mustafatufan_1 (I want to add more miner, so added the number just in case.)
Device type: GekkoScience Compac F
Normal speed: 380Gh/s
Reward payment: 1MustaoR6XLZ1fE31XmK1mXnfqMSchAuBs (I am extremely lucky person, get ready for a block.)
newbie
Activity: 4
Merit: 0
Hi @willi8874, my Compac F has been having some problems so I'm pointing this at the pool for now until I get it running again:
Device: Apollo BTC
Speed: 2 TH/s
Danke!
Hi 0id1d thanks for the information, if it is only for some days, i let the old device in the table. is it for longer or ever, i can edit your device type, no problem. i have also update the miner list on page one and nice to the the new miner and the new bestshares in the top 10 list... very nice and a block would be even nicer Best regards and a nice weekend, happy mining. Willi Thanks willi9974 Agree, a block would be very very nice  I added "Apol" to the end of my worker name so that it wouldn't get confused with my Compac - it will probably be a week or so before I get that back to mining with the pool. Thanks again and a nice weekend and happy mining too!
newbie
Activity: 5
Merit: 1
Thanks, i know about the "rules" =) "new" miners are on the way...
legendary
Activity: 3654
Merit: 3003
Top-tier crypto casino and sportsbook
wow, this is what i was looking for. Username: hanz0n
Device type: 2 x Rockminer U10
Normal speed: 15Ghz x 2
more small miners on the way. A warm welcome hanz0n, But keep in your mind if we find a blocking this group you need a 7d min. Speed from 200 GHs So you have time to ramp up the speed with more miner under one username to get minimum 200 GHs Cross our fingers for maybe a block in the future Willi
newbie
Activity: 5
Merit: 1
wow, this is what i was looking for. Username: hanz0n
Device type: 2 x Rockminer U10
Normal speed: 15Ghz x 2
more small miners on the way.
|
