Pages:
Author

Topic: Lottery Solo Pool Miner Race on ckpool - page 10. (Read 8544 times)

newbie
Activity: 1
Merit: 0
February 11, 2024, 04:11:58 PM
#92
Hello Willi, I am joining with my Comap_F.

Username: Grandor_1
Device type: Compaq F
Normal speed: 200 GH/s
BTC address: bc1qr3jywd0hnj7z0q408v2sszpd49358033wqh6eg

Bye....
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 11, 2024, 02:19:51 PM
#91
Hello Willi and everyone, I'm joining the adventure

Username: kekeck33_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address: 3BE5PYB4ckC6EawVss59biokKCfuWgkAEg

Yeeeeah one more Bitaxe joining the gang  Grin

I would love that someone from our small group could solve the first recorded BTC block with a Bitaxe  Cool
here our top 10 from only the Bitaxe
Brun0 in first place with a very large distance to second place, very nice to see...

fingers crossed

Place|User|Device Type|Speed 5 Min.|Number Shares|Best Share Ever|
-----|----------------------|--------------------|----------------|--------------|-------------------|
#1|brun0|Bitaxe ULTRA BM1366|
488 GH/s
hero member
Activity: 504
Merit: 1065
Crypto Swap Exchange
February 11, 2024, 02:11:57 PM
#90
Hello Willi and everyone, I'm joining the adventure

Username: kekeck33_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address: 3BE5PYB4ckC6EawVss59biokKCfuWgkAEg

Yeeeeah one more Bitaxe joining the gang  Grin

I would love that someone from our small group could solve the first recorded BTC block with a Bitaxe  Cool
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 11, 2024, 02:11:36 PM
#89
Hello Willi and everyone, I'm joining the adventure

Username: kekeck33_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address: 3BE5PYB4ckC6EawVss59biokKCfuWgkAEg

Welcome kekeck33,

the list one page one is now uptodate with your small miner...
Welcome and cross my fingers for you / all of us, maybe it will make any time a big bang and we find a block and if not, we have a lot of fun with our small miners.

Best regards,
Willi
newbie
Activity: 43
Merit: 0
February 11, 2024, 02:03:48 PM
#88
Hello Willi and everyone, I'm joining the adventure

Username: kekeck33_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address: 3BE5PYB4ckC6EawVss59biokKCfuWgkAEg
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 10, 2024, 03:26:59 AM
#87
Yes in your case is it not usefull

Butmaybe in the future, put a pattery pack at your home into your solar installation so you can user 100% green power for small lucky lottery miner.

Gross my fingers for you you can find a block allone with your green powerd miner.

Have a good Weekend
Willi

Edit:
If someone would share some photos from our miner round, please do that, i love that miner photo porn :-)
jr. member
Activity: 49
Merit: 2
February 10, 2024, 03:22:25 AM
#86

Hi Fruitman,

The normal breaks, that your miner have is a problem und you will drop out if we find a block.
But if the block finder is your miner you will get the 10% bonus. If a other member will find a block, you will not reach the permanent active state… it’s up to you…

Basic requirement for payment:
- the miner has been always active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
- If a miner finds a block but not over 200 GHs in 7 days, he still gets the 10% bonus

Best regards,
Willi

Ok, so it means: if my miner will find a block, i need to share it.
But if someone else find a block i will not get any reward because my miner is not online 24/7 for at least one week (even the 7 day Hashrate is above 200GHs), correct?
So it would be easy to say - for me there is no sense to join -.- right?

Best regards
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 09, 2024, 01:47:02 PM
#85
Hello Willi,

i would like to join you.
I have some small miners (compaq, Newpack, S3 and S9)
But i some of them running only if there is enough solar power, others only when i am in my workshop.
So some of them running just a few hours a day.
Would this be also ok for you and the other members?

Best reagrds

Fruitman
Hi Fruitman,

The normal breaks, that your miner have is a problem und you will drop out if we find a block.
But if the block finder is your miner you will get the 10% bonus. If a other member will find a block, you will not reach the permanent active state… it’s up to you…

Basic requirement for payment:
- the miner has been always active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
- If a miner finds a block but not over 200 GHs in 7 days, he still gets the 10% bonus

Best regards,
Willi
jr. member
Activity: 49
Merit: 2
February 09, 2024, 01:32:14 PM
#84
Hello Willi,

i would like to join you.
I have some small miners (compaq, Newpack, S3 and S9)
But i some of them running only if there is enough solar power, others only when i am in my workshop.
So some of them running just a few hours a day.
Would this be also ok for you and the other members?

Best reagrds

Fruitman
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 09, 2024, 02:37:57 AM
#83
Hello everyone, I added 2 new Bitaxe Ultra to the pool.

Username: tyrexwolf_2
Device type: Bitaxe ULTRA BM1366
Normal speed: 404 GH/s
BTC address  Wink : 35S3SiSQ2cBhQvTn23BXcUq1WhUq5JVnTk

Username: tyrexwolf_3
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address  Wink : 35S3SiSQ2cBhQvTn23BXcUq1WhUq5JVnTk
Welcome tyrexwolf,

have add you to our excel device list and will update the table later if your second miner are online...

https://solorun.lima.zone/
At the moment we have 53 active miner and ~70 GHs hashrate and created 112.145.694.003 valid shares with a bestshare of 69.147.539.512

 "hashrate1m": "58.8T",
 "hashrate5m": "62.4T",
 "hashrate1hr": "77.9T",
 "hashrate1d": "73.8T",
 "hashrate7d": "133T",
 "lastshare": 1707464173,
 "workers": 57,
 "shares": 112145694003,
 "bestshare": 5045306818.968587,
 "bestever": 69147539512

Best regards,
Willi

Here a overview of the last 2 days from my dashboard at home and a detailview that is possible up to each single worker


newbie
Activity: 2
Merit: 1
February 09, 2024, 02:27:25 AM
#82
Hello everyone, I added 2 new Bitaxe Ultra to the pool.

Username: tyrexwolf_2
Device type: Bitaxe ULTRA BM1366
Normal speed: 404 GH/s
BTC address  Wink : 35S3SiSQ2cBhQvTn23BXcUq1WhUq5JVnTk

Username: tyrexwolf_3
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address  Wink : 35S3SiSQ2cBhQvTn23BXcUq1WhUq5JVnTk

newbie
Activity: 31
Merit: 0
February 08, 2024, 06:44:36 PM
#81
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 08, 2024, 02:04:00 PM
#80
Our member statistics: or click on the live view php page https://solorun.lima.zone/ (simple overview)
Maybe it is good idea not to show 7d>200G rows in red font when even they are inactive as they are eligible. It would be easier to track reward eligibility.

Edit: Or maybe you could create another column that shows eligibility, it would provide better clarity.

on the status page you can see all, but only in german, sorry. But with the browser todays time you can translate with one or two clicks.

https://solorun.lima.zone/

German: Anzahl der Worker für Payout mit Hashrate >= 200G in beiden Werten (5m und 7d)
Englisch: Number of workers for payout with hashrate >= 200G in both values (5m and 7d)

this is to prevent script children who temporarily redirect their miner to the pool via script in order to keep the hashrate artificially high with little effort.

if your miner is always online and has a technical problem for an hour during the blockfund, i will take this into account and you will be included in the payout. if i see that your miner is regularly offline, you are out.


Basic requirement for payment:
- the miner has been always active for the last 7 days (you can see this in the CKpool statistics)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
- If a miner finds a block but not over 200 GHs in 7 days, he still gets the 10% bonus


###########################

have update the table with the actual data.

Place|User|Device Type|Speed 5 Min.|Number Shares|Best Share|
-----|----------------------|--------------------|----------------|--------------|-------------------|
#1|brun0|Bitaxe ULTRA BM1366|
477 GH/s
newbie
Activity: 31
Merit: 0
February 05, 2024, 02:08:23 PM
#79
Our member statistics: or click on the live view php page https://solorun.lima.zone/ (simple overview)
Maybe it is good idea not to show 7d>200G rows in red font when even they are inactive as they are eligible. It would be easier to track reward eligibility.

Edit: Or maybe you could create another column that shows eligibility, it would provide better clarity.
newbie
Activity: 31
Merit: 0
February 02, 2024, 04:27:53 AM
#78
hello everyone,

for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software)

your gekko-compacf-freq 380.

my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set.

https://www.talkimg.com/images/2024/02/02/klp7D.jpeg
https://www.talkimg.com/images/2024/02/02/kllMw.jpeg

my parameter on picture.

on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z)
the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V //
 for the max (350 gh/s you need 5 A per USB port)
be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W)
Thank you, I will experiment based on these.
Code:
[Unit]
Description=runs cgminer
After=network-online.target

[Service]
Type=simple
Restart=always
ExecStart=/home/rpi4/cgminer/cgminer --syslog --real-quiet -o stratum+tcp://solo.ckpool.org:3333 -u bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.mustafatufan_1 -p x --gekko-compacf-freq 460 --gekko-mine2 --gekko-start-freq 320 --gekko-tune-up 85 --gekko-tune2 60

[Install]
WantedBy=multi-user.target
Everything is same but with increased gekko-compacf-freq to 460, now it goes close to 300G, seems working. Thank you. I will try higher values after I make sure I have correct electrical setup.
newbie
Activity: 31
Merit: 0
February 02, 2024, 02:59:54 AM
#77
hello everyone,

for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software)

your gekko-compacf-freq 380.

my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set.

https://www.talkimg.com/images/2024/02/02/klp7D.jpeg
https://www.talkimg.com/images/2024/02/02/kllMw.jpeg

my parameter on picture.

on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z)
the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V //
 for the max (350 gh/s you need 5 A per USB port)
be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W)
Thank you, I will experiment based on these.
newbie
Activity: 11
Merit: 0
February 02, 2024, 12:21:29 AM
#76
hello everyone,

for the compacf gekko science the frequency for me is 480 MH/z (originally 460 on the cgminer 4.12.1 software)

your gekko-compacf-freq 380.

my setting is 480 already increased to 500. depending on the key model it is necessary to mount in steps of 5 MH/z until it becomes unstable or the frequency is placed on a frequency below what was set.

https://www.talkimg.com/images/2024/02/02/klp7D.jpeg
https://www.talkimg.com/images/2024/02/02/kllMw.jpeg

my parameter on picture.

on the other hand, the higher the frequency, the more ventilation is required (it heats up enormously at more than 500 MH/z)
the higher the frequency, the more Current is required on the USB part (example for 460 1.6 to 1.8 A on 5.2 V // for 480 2 to 2.2 A on 5.2 V //
 for the max (350 gh/s you need 5 A per USB port)
be careful not all usb hubs provide this Amperage (my usb hub blocks at 2.4 A under 5.2 V) my usb hub is powered by 12 V for 10 A (120 W)
legendary
Activity: 3500
Merit: 2792
Enjoy 500% bonus + 70 FS
February 01, 2024, 04:56:16 PM
#75
Welcome to the new members. Every miner who helps us to increase the chance of finding a block is welcome.
A few have come together now. Let's see how stable the community is and how many will still be around in a year or two.

Then keep your fingers crossed for the race for the best share and, above all, a block.

By the way, if someone like me or someone else has already done it, rents a Nicehash Rental and fires at the pool, nobody will mind...

Best regards
Willi
newbie
Activity: 31
Merit: 0
February 01, 2024, 04:42:36 PM
#74
Any participant with single GekkoScience Compac F, can you share your cgminer parameters? Mine does not exceed 250G most of the time, I wonder if I do something wrong.

systemd job i configured:
Code:
[Unit]
Description=runs cgminer
After=network-online.target

[Service]
Type=simple
Restart=always
ExecStart=/home/rpi4/cgminer/cgminer --syslog --real-quiet -o stratum+tcp://solo.ckpool.org:3333 -u bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.mustafatufan_1 -p x --gekko-compacf-freq 380 --gekko-mine2 --gekko-start-freq 320 --gekko-tune-up 85 --gekko-tune2 60

[Install]
WantedBy=multi-user.target
newbie
Activity: 2
Merit: 1
February 01, 2024, 02:35:36 PM
#73
Hello everyone, I'm joining the Bitaxe adventure on your pool.

Username: tyrexwolf_1
Device type: Bitaxe ULTRA BM1366
Normal speed: 460 GH/s
BTC address  Wink : 35S3SiSQ2cBhQvTn23BXcUq1WhUq5JVnTk

Happy mining  Cool
Pages:
Jump to:
© 2020, Bitcointalksearch.org