Topic: LUXCoin—New PHI2 PoW/PoS Hybrid—SC—SegWit—PrivateSend—PoS Web Wallet—LuxGate - page 57. (Read 130255 times)
June 04, 2018, 06:52:28 AM
so many FPGA join in,can the folk ahead of time?
June 04, 2018, 05:51:51 AM
Luxcoin is both technical and professional knowledge of the project.This project is not as hype as other projects,sooner or later Luxcoin will enter the top 100 rankings.
June 04, 2018, 03:12:28 AM
Article with explaination of what can expect from upcoming Luxcore v5 launch available on Medium and Steemit!
https://medium.com/luxcore/luxcore-v5-the-revolution-will-be-televised-de38edd3eab5
https://steemit.com/luxcore/@luxcore/luxcore-v5-the-revolution-will-be-televised
https://twitter.com/LUX_COIN/status/1003340531114668035
https://medium.com/luxcore/luxcore-v5-the-revolution-will-be-televised-de38edd3eab5
https://steemit.com/luxcore/@luxcore/luxcore-v5-the-revolution-will-be-televised
https://twitter.com/LUX_COIN/status/1003340531114668035
Wow that was a massive update. That block rewards dont change was a unpleasant supprise for Masternodes that earn pennies at the moment. But the important new for Lux itself looks good!
June 03, 2018, 10:05:45 PM
Article with explaination of what can expect from upcoming Luxcore v5 launch available on Medium and Steemit!
https://medium.com/luxcore/luxcore-v5-the-revolution-will-be-televised-de38edd3eab5
https://steemit.com/luxcore/@luxcore/luxcore-v5-the-revolution-will-be-televised
https://twitter.com/LUX_COIN/status/1003340531114668035
https://medium.com/luxcore/luxcore-v5-the-revolution-will-be-televised-de38edd3eab5
https://steemit.com/luxcore/@luxcore/luxcore-v5-the-revolution-will-be-televised
https://twitter.com/LUX_COIN/status/1003340531114668035
June 03, 2018, 06:43:15 PM
I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
do you have wallet.dat file?
I have copied the wallet.dat file in advance.
Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?
No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX but I can not start, the error pops up!
This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.
Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?
Also you can try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf
If you dont have another backup and guide above didnt helped, follow the guide that help to import private keys to new wallet.dat https://cdn.discordapp.com/attachments/379684706859483137/451479873534427136/LUX_dump_import_privkeys.txt
what will happen after the 300,000 block 
say some hard fork ...
Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed. say some hard fork ...Thank you for your reply. However this is not what the problem is here. My wallet.dat is perfectly allright, it works and syncs just fine on other PCs (running Win7). The problem is, that my main PC (Windows 10) won't start the QT application at all. As soon as I start lux-qt.exe it very briefly shows a blank window in the size of the start-splash and then closes itself again. This happens with a clean LUX folder in Roaming as well as with a fully synced one, in compatibility mode, in "run-as-administrator"-mode etc. I have no chance of opening the GUI on this PC; all that happens is that it puts the above mentioned lines into debug.log
P.S.: I'm really excited about all the things down the road. Keep up the good work!
I've seen this before on another QT based wallet. I don't remember the fix unfortunately. I understand it is having some sort of problem with loading the splash screen because of issue with the .png format. Use a drawing or image display app to check if you are able to load the splash screen, the png file may be corrupted. You can just create a new .png file and replace the one that comes with the wallet and see if that will load. Nt sure if there is maybe a switch to disable the splash screen at startup but you could check that on the Win 7 machine.
June 03, 2018, 04:02:56 PM
what will happen after the 300,000 block say some hard fork ...
Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed. say some hard fork ...So in about 9000 blocks we may have the big fork ready? I assume the new wallet will be out in good time so we have time to change
June 03, 2018, 07:32:45 AM
Thank you for your reply. However this is not what the problem is here. My wallet.dat is perfectly allright, it works and syncs just fine on other PCs (running Win7). The problem is, that my main PC (Windows 10) won't start the QT application at all. As soon as I start lux-qt.exe it very briefly shows a blank window in the size of the start-splash and then closes itself again. This happens with a clean LUX folder in Roaming as well as with a fully synced one, in compatibility mode, in "run-as-administrator"-mode etc. I have no chance of opening the GUI on this PC; all that happens is that it puts the above mentioned lines into debug.log
P.S.: I'm really excited about all the things down the road. Keep up the good work!
Sad to hear it, looks like some issue from your side. Anyway can suggest you to check your antivirus exceptions, might be AV soft blocking qt, and you always can use Lux web wallet, its more much comfortable to use compare with qt - no need to run it 24/7 if you staking your coins and be able to login into from any browser that around or even your mobile phone.P.S.: I'm really excited about all the things down the road. Keep up the good work!
And thanks for kindly words
June 03, 2018, 02:26:32 AM
I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
do you have wallet.dat file?
I have copied the wallet.dat file in advance.
Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?
No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX but I can not start, the error pops up!
This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.
Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?
Also you can try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf
If you dont have another backup and guide above didnt helped, follow the guide that help to import private keys to new wallet.dat https://cdn.discordapp.com/attachments/379684706859483137/451479873534427136/LUX_dump_import_privkeys.txt
what will happen after the 300,000 block say some hard fork ...
Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed. say some hard fork ...Thank you for your reply. However this is not what the problem is here. My wallet.dat is perfectly allright, it works and syncs just fine on other PCs (running Win7). The problem is, that my main PC (Windows 10) won't start the QT application at all. As soon as I start lux-qt.exe it very briefly shows a blank window in the size of the start-splash and then closes itself again. This happens with a clean LUX folder in Roaming as well as with a fully synced one, in compatibility mode, in "run-as-administrator"-mode etc. I have no chance of opening the GUI on this PC; all that happens is that it puts the above mentioned lines into debug.log
P.S.: I'm really excited about all the things down the road. Keep up the good work!
June 02, 2018, 10:05:09 PM
I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
do you have wallet.dat file?
I have copied the wallet.dat file in advance.
Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?
No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX but I can not start, the error pops up!
This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.
Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?
Also you can try to follow this guide https://cdn.discordapp.com/attachments/388703503973089301/432195164379938817/LUX_QT_Reset_Upgrade_v0.1.pdf
If you dont have another backup and guide above didnt helped, follow the guide that help to import private keys to new wallet.dat https://cdn.discordapp.com/attachments/379684706859483137/451479873534427136/LUX_dump_import_privkeys.txt
what will happen after the 300,000 block say some hard fork ...
Yes, big changes planned ahead, preliminary block height is 300k but it can be pushed if needed. say some hard fork ... June 02, 2018, 01:49:34 PM
what will happen after the 300,000 block say some hard fork ...
say some hard fork ... June 01, 2018, 12:08:38 PM
If you dont have enough coins or skills to run you own MN, use MY service
Join the shared masternode service NAB_PROJECT_SHARED_MN
- service commission is only 2% of the income
- 1 seat = 5% of MN
- No setup fee
- Collateral lock time 7 days
- easy to get in, easy to get out
- fully transparent work
- Weekly payout(Saturday) or reinvest available
Join our discord channel
https://discord.gg/cmBseGk
Join the shared masternode service NAB_PROJECT_SHARED_MN
- service commission is only 2% of the income
- 1 seat = 5% of MN
- No setup fee
- Collateral lock time 7 days
- easy to get in, easy to get out
- fully transparent work
- Weekly payout(Saturday) or reinvest available
Join our discord channel
https://discord.gg/cmBseGk
June 01, 2018, 07:52:21 AM
I downloaded a new wallet v.4.3 - deleted all files in the /Roaming/lux folder but the wallet does not start, here are the logs:
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::showNormalIfMinimized()
GUI: QObject::connect: Cannot connect (null)::triggered() to BitcoinGUI::gotoSmartTokenPage()
GUI: QWidget::insertAction: Attempt to insert null action
GUI: setGeometry: Unable to set geometry 5x13+640+280 on QWidgetWindow/'QLabelClassWindow'. Resulting geometry: 120x13+640+280 (frame: 8, 31, 8, 8, custom margin: 0, 0, 0, 0, minimum size: 0x0, maximum size: 16777215x16777215).
What should I do to start it?
do you have wallet.dat file?
I have copied the wallet.dat file in advance.
Glad to hear it! Would be a shame to loose your Lux
Did you get the needed help?
No, no one helped. At me such 1-st time happens. I even delete everything in the folder /appdata/LUX but I can not start, the error pops up!
This guide I downloaded, but does not start the wallet, writes a bug in the program and closes the program. And in the logs he writes, what I wrote above.
Hello all. I have the exact same problem on Windows 10. The GUI wallet worked perfectly until yesterday, but today it won't start and just leaves the above mentioned errors in the log. Was there ever a solution to this?
June 01, 2018, 04:31:59 AM
I just got to thinking. We want more miners to move away from bsod. Im on unimining myself. But maybe it would help if you contacted OCminer and he set up Suprnova for LUX?
That is a very good and popular pool which could possibly help. Now we just get spammed with alot of small pools that "no one" has heard about.
Anyway, spreading the mining hashes between available pools is best way to avoid 51% attack menace... so lets spread it!
Code:
https://zpool.ca/
http://zergpool.com/
http://yiimp.eu/
https://www.unimining.net/
https://umine.org/
https://titan-mining.net/
https://spool.cloud/
http://rushhourmining.com/
https://www.quantumminingpool.com/
https://www.ominousnetwork.com/
https://pool.hashrefinery.com/
https://pool.coin-miners.info/
https://www.phi-phi-pool.com/
http://pickaxe.pro/
https://www.omegapool.cc/
https://miner-control.de/
https://minepool.com/
https://minemoney.co/
https://hive.gulfcoastmining.com/
http://hashfaster.com/
https://gos.cx/
https://futurecoins.club/
https://fairmine.pro/
http://epicpool.net/
https://bsod.pw/
http://bpool.io/
http://bitcoin-pool.de/
https://blockmuncher.com/
http://antminepool.com
http://zergpool.com/
http://yiimp.eu/
https://www.unimining.net/
https://umine.org/
https://titan-mining.net/
https://spool.cloud/
http://rushhourmining.com/
https://www.quantumminingpool.com/
https://www.ominousnetwork.com/
https://pool.hashrefinery.com/
https://pool.coin-miners.info/
https://www.phi-phi-pool.com/
http://pickaxe.pro/
https://www.omegapool.cc/
https://miner-control.de/
https://minepool.com/
https://minemoney.co/
https://hive.gulfcoastmining.com/
http://hashfaster.com/
https://gos.cx/
https://futurecoins.club/
https://fairmine.pro/
http://epicpool.net/
https://bsod.pw/
http://bpool.io/
http://bitcoin-pool.de/
https://blockmuncher.com/
http://antminepool.com
June 01, 2018, 03:06:55 AM
Snip
I just got to thinking. We want more miners to move away from bsod. Im on unimining myself. But maybe it would help if you contacted OCminer and he set up Suprnova for LUX?
That is a very good and popular pool which could possibly help. Now we just get spammed with alot of small pools that "no one" has heard about.
May 31, 2018, 08:45:25 PM
Where do I find my private key in PC wallet so I can import my wallet in web wallet?
Run qt wallet, go to Instruments - > Console, type command Code:
dumpprivkey your_wallet_address
It will show you private key of your single address, do it for all your addresses where coins stored.
Then just import prv keys to web wallet.
how is the new exchanges listing going on? is there a posibility to have one soon or is it taking more effort than thought?
Still in work, nothing to share currently yet. May 31, 2018, 06:00:40 PM
how is the new exchanges listing going on? is there a posibility to have one soon or is it taking more effort than thought?
May 31, 2018, 03:08:58 PM
Where do I find my private key in PC wallet so I can import my wallet in web wallet?
May 31, 2018, 09:25:26 AM
How many coins do you need to POS?
Read few posts above pls.When will the new mining algo go into effect?
Will be announced in advance, stay turned. May 31, 2018, 08:33:28 AM
When will the new mining algo go into effect?
May 31, 2018, 04:55:14 AM
How many coins do you need to POS?
Jump to: